STAAD/CHINA在搭架设计及强度校核中的应用

搭架作业是船舶修造日常工作中比较普通、常见的工程,合理、快速地设计和校验脚手架的强度,直接影响生产施工的安全性、经济性和效率。文章介绍了如何使用有限元软件STAAD/CHINA对搭架方案进行建模计算及校验,计算结果接近实际,提高了强度校验的效率。     

Dynamic demand estimation and prediction for traffic urban networks adopting new data sources

Nowadays, new mobility information can be derived from advanced traffic surveillance systems that collect updated traffic measurements, both in fixed locations and over specific corridors or paths. Such recent technological developments point to challenging and promising opportunities that academics and practitioners have only partially explored so far.The paper looks at some of these opportunities within the Dynamic Demand Estimation problem (DDEP). At first, data heterogeneity, accounting for different sets of data providing a wide spatial coverage, has been investigated for the benefit of off-line demand estimation. In an attempt to mimic the current urban networks monitoring, examples of complex real case applications are being reported where route travel times and route choice probabilities from probe vehicles are exploited together with common link traffic measurements.Subsequently, on-line detection of non-recurrent conditions is being recorded, adopting a sequential approach based on an extension of the Kalman Filter theory called Local Ensemble Transformed Kalman Filter (LETKF).Both the off-line and the on-line investigations adopt a simulation approach capable of capturing the highly nonlinear dependence between the travel demand and the traffic measurements through the use of dynamic traffic assignment models. Consequently, the possibility of using collected traffic information is enhanced, thus overcoming most of the limitations of current DDEP approaches found in the literature.     

城市地下道路分(合)流匝道通风阻力特性

为分析多点进出结构的城市地下道路空气流动特性,以长沙市营盘路湘江隧道为原型,通过现场实测、缩尺模型试验以及CFD软件数值模拟方法,对分(合)匝道通风阻力特性进行了研究,考察了雷诺数、风量比、分岔角度对分(合)流匝道阻力特性的影响规律。研究结果表明:1)主隧道与匝道风量比、主隧道与匝道夹角是影响分(合)流匝道局部阻力系数的关键因素;2)城市地下道路分(合)流匝道局部阻力变化特性,不宜简单套用通风管道的三通构件的参数;3)结合最小二乘法和Matlab软件对计算结果进行多因素回归分析,给出了基于长沙营盘路湘江隧道的分(合)流匝道主隧道和匝道的局部阻力系数关联式。研究结果可为复杂结构城市地下道路通风系统阻力特性分析及通风工程优化设计提供方法参考。     

Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

快速老化小鼠的学习记忆缺陷及其生化机制

目的用快速老化小鼠(SAMP8)模拟老年痴呆,观察其学习记忆能力,并探讨其学习记忆能力下降的可能机制。方法采用10月龄SAMP8,并用同龄抗快速老化小鼠(SAMR1)作为正常对照。用水迷路检测近记忆以及空间学习记忆能力。用生物化学方法检测大脑皮层线粒体膜电位和ATP酶活力,观察线粒体功能;检测皮层和海马胆碱乙酰基转移酶(ChAT)和乙酰胆碱酯酶(AChE)的活力,观察中枢胆碱能神经功能;检测血清超氧化物歧化酶(SOD)活力和丙二醛(MDA)含量,观察其全身性氧化应激状况。结果与SAMR1相比,SAMP8出现明显的衰老体征,其近记忆和空间学习记忆能力明显减弱,具有衰老和痴呆特征;皮层线粒体膜电位和ATP酶活力显著降低,海马ChAT活力显著下降,AChE活力显著升高,血清SOD活力稍有增高。结论SAMP8可以很好地模拟老年痴呆,其机制包括大脑皮层线粒体功能降低、海马胆碱能神经功能下降以及氧化应激等。     

探讨沥青路面局部渗水的原因及处理方法

通过武汉市汉蔡高速公路沥青路面出现的局部渗水现象,分析沥青路面产生局部渗水的原因及处理的必要性,提出对沥青路面局部渗水的处理原则及处理方法。     

基于ASP.NET的B/S架构的软件在Windows7系统下的部署

本文重点研究了对于B/S架构的软件在Windows7系统下部署时应该采用的一系列方法及在部署时遇到的一系列问题的解决方案。文中分析了利用ASP.NET开发的B/S架构的软件的优点并在此基础上介绍了软件部署的流程。本文在分析过程中结合具体实例提出了部署中一些常见问题的解决方案。     

姜黄素促进RAW264.7源性M1巨噬细胞向替代激活M2表型极化

目的观察姜黄素对LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)极化的影响及机制。方法不同浓度姜黄素(6.25、12.5、25μmol/L)干预LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)12h,同时再加入20μmol/L GW9662与25μmol/L姜黄素共同干预LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)12h,采用Real-time PCR、ELISA及Western blot方法检测IL-1β、IL-6和M2表型标志分子KLF4、FIZZ1、MGL1、PPARγ的表达,及阻断PPARγ后KLF4和FIZZ1的表达。结果不同浓度姜黄素均能上调LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)的M2标志分子的表达,并且抑制炎症因子IL-1β和IL-6的分泌;阻断PPARγ后,RAW264.7巨噬细胞源性M1表型巨噬细胞表达M2标志分子下调。结论姜黄素通过活化PPARγ促进LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)向M2表型极化。     

吸烟和β3-肾上腺素能受体基因Trp64Arg、锰超氧化物歧化酶9Ala/Val基因多态性与非酒精性脂肪性肝病的相关性

目的探讨吸烟和β3-肾上腺素能受体(β3-AR))基因Trp64Arg、锰超氧化物歧化酶9Ala/Val(MnSOD9Ala/Val)基因多态性与非酒精性脂肪性肝病(NAFLD)发病之间的关系。方法采用病例-对照研究的方法,以720例NAFLD患者及720例健康对照者的外周血白细胞为样本,采用聚合酶链反应(PCR)技术分析β3-AR基因Trp64Arg和MnSOD9Ala/Val基因多态性。结果β3-AR基因Trp64Arg(A/A)基因型和MnSOD9Ala/Val(V/V)基因型频率分布分别为39.4%、71.7%(病例组)和21.1%、43.3%(对照组),差异有统计学意义(P<0.01;P<0.01)。Trp64Arg(A/A)基因型者患NAFLD的风险显著增加(OR=2.434,95%CI=1.816~4.075)。MnSOD9Ala/Val(V/V)基因型者患NAFLD的风险也显著增加(OR=3.308,95%CI=1.913~4.509)。基因突变的协同分析发现,Trp64Arg(A/A)/MnSOD9Ala/Val(V/V)基因型者在NAFLD组和对照组中的分布频率分别为32.8%和6.5%,差异有统计学意义(P<0.01)。Trp64Arg(A/A)/MnSOD9Ala/Val(V/V)基因型者患NAFLD的风险显著增加(OR=9.753,95%CI=4.292~12.426)。病例组的吸烟率显著高于对照组(OR=2.623,95%CI=1.425~4.957),Trp64Arg(A/A)/MnSOD9Ala/Val(V/V)基因型与吸烟有协同作用(OR=33.764,95%CI=18.907~61.582)。结论 Trp64Arg(A/A)/MnSOD9Ala/Val(V/V)基因型和吸烟是NAFLD的易患因素,三者的联合在NAFLD的发生中起着协同的作用。     

焊接顺序对高速列车侧墙焊接残余应力的影响

按实际加工工艺,基于有限元软件SYSWELD,采用有限元热弹塑性分析方法和Fortran语言对焊接热源进行二次开发,获得了所需要的热源,并通过实验验证了热源模型的准确性.在此基础之上,通过分析高速列车CRH380B侧墙焊接残余应力分布规律和焊接顺序对于侧墙焊接残余应力的影响,得到了侧墙焊接最优方案,为企业实际生产中的降低焊接残余应力方案选择提供了依据.