一种城市轨道交通便携式检票机

对一种便携式检票机的设计开发作详细介 绍,首先从总体出发设计主控模块、智能卡读写模块、 SAM 卡模块和 ZigBee 无线通信模块四大模块,并定义 各自功能与接口内容,然后对应用工作流程进行分析, 设计基于 ZigBee 无线组网技术构建的便携式检票机系 统,最后采用 WindowsCE 电源管理器实现电源管理方 案。详细介绍应用于城市轨道交通的便携式检票机的 各种功能,为便携式检票机的实际应用提供参考。     

发动机缸体用检具变形的探讨与控制

对于铝合金检具变形引起的尺寸不稳定,给予规范的热处理和粘接装配,使发动机缸体用检具本体变形得到控制。     

平地机安装自动找平系统的使用与校对

平地机被广泛应用于各种路面工程的平整及其它工程的改良施工中,介绍了平地机自动找平系统的组成、作用、控制,着重对系统的三大作用、校对时间作了说明.     

可控硅程序控制配料装置

应用可控硅控制技术,对物料配料计量生产流程进行程序控制,可以改善处在粉尘较多及计量要求较频繁工作环境下的配料控制工作.针对自动配料计量控制电路的工作原理及其调节方法进行了较详细的叙述,该装置使用在水泥建材生产配料流程及建筑施工物料配料流程中,具有结构简单、系统运行性能可靠、配料计量调整范围大、误差率小等使用效果.     

基于视觉的前方车辆探测技术研究方法综述

对国内外关于车道上本车前方车辆检测方法进行了综述。根据探测车辆所采用的传感器不同,分别对采用单目视觉、双目视觉、视觉与其他传感器融合以及非视觉传感器的几种探测方法进行了比较与分析。同时,针对每种探测方法,进一步阐述了目前车辆识别的一些具体算法。最后,指出了每种方法存在的优点和一些不足。     

沥青混凝土转运车对提高道路施工质量的试验研究

对道路摊铺过程中采用摊铺机直接摊铺作业和采用徐工AT1000A型转运车与摊铺机联合施工作业的试验路面效果进行了对比,分析了摊铺温度场和骨料摊铺效果.结果证明使用沥青混凝土转运车是提高道路施工质量的有效手段.     

特种弹药铁路运输可调式定位装置研究

概述了特种弹药铁路运输可调试定位装置的主要功能、技术要求、主要战技术指标，介绍了特种弹药铁路运输采用的从箱体顶部固定方式，并进行了相应的可调式定位装置研究，将装置分为整体固定和单点独立固定两种，用于固定弹箱在敞车内的位置，确保弹体运输安全。     

Strava Metro data for bicycle monitoring: a literature review

ABSTRACT

Monitoring bicycle trips is no longer limited to traditional sources, such as travel surveys and counts. Strava, a popular fitness tracker, continuously collects human movement trajectories, and its commercial data service, Strava Metro, has enriched bicycle research opportunities over the last five years. Accrued knowledge from colleagues who have already utilised Strava Metro data can be valuable for those seeking expanded monitoring options. To convey such knowledge, this paper synthesises a data overview, extensive literature review on how the data have been applied to deal with drivers’ bicycle-related issues, and implications for future work. The review results indicate that Strava Metro data have the potential—although finite—to be used to identify various travel patterns, estimate travel demand, analyse route choice, control for exposure in crash models, and assess air pollution exposure. However, several challenges, such as the under-representativeness of the general population, bias towards and away from certain groups, and lack of demographic and trip details at the individual level, prevent researchers from depending entirely on the new data source. Cross-use with other sources and validation of reliability with official data could enhance the potentiality.     

Dynamic stride length adaptation according to utility and personal space

Pedestrians adjust both speed and stride length when they navigate difficult situations such as tight corners or dense crowds. They try to avoid collisions and to preserve their personal space. State-of-the-art pedestrian motion models automatically reduce speed in dense crowds simply because there is no space where the pedestrians could go. The stride length and its correct adaptation, however, are rarely considered. This leads to artefacts that impact macroscopic observation parameters such as densities in front of bottlenecks and, through this, flow. Hence modelling stride adaptation is important to increase the predictive power of pedestrian models. To achieve this we reformulate the problem as an optimisation problem on a disk around the pedestrian. Each pedestrian seeks the position that is most attractive in a sense of balanced goals between the search for targets, the need for individual space and the need to keep a distance from obstacles. The need for space is modelled according to findings from psychology defining zones around a person that, when invaded, cause unease. The result is a fully automatic adjustment that allows calibration through meaningful social parameters and that gives visually natural results with an excellent fit to measured experimental data.     

舱口盖强度计算方法

在某集装箱舱口盖结构强度的有限元计算中，对舱口盖周围水平限位器和支撑块处的约束以及顶部压紧器处的关联程度进行了模拟，分别讨论了在垂向设计载荷的情况下，水平限位器、支撑块处的不同约束以及顶部压紧器的不同关联程度对舱口盖应力分布的影响，得出更符合实际情况的舱口盖结构强度计算方法。