Field implementation feasibility study of cumulative travel‐time responsive (CTR) traffic signal control algorithm

The cumulative travel‐time responsive (CTR) algorithm determines optimal green split for the next time interval by identifying the maximum cumulative travel time (CTT) estimated under the connected vehicle environment. This paper enhanced the CTR algorithm and evaluated its performance to verify a feasibility of field implementation in a near future. Standard Kalman filter (SKF) and adaptive Kalman filter (AKF) were applied to estimate CTT for each phase in the CTR algorithm. In addition, traffic demand, market penetration rate (MPR), and data availability were considered to evaluate the CTR algorithm's performance. An intersection in the Northern Virginia connected vehicle test bed is selected for a case study and evaluated within vissim and hardware in the loop simulations. As expected, the CTR algorithm's performance depends on MPR because the information collected from connected vehicle is a key enabling factor of the CTR algorithm. However, this paper found that the MPR requirement of the CTR algorithm could be addressed (i) when the data are collected from both connected vehicle and the infrastructure sensors and (ii) when the AKF is adopted. The minimum required MPRs to outperform the actuated traffic signal control were empirically found for each prediction technique (i.e., 30% for the SKF and 20% for the AKF) and data availability. Even without the infrastructure sensors, the CTR algorithm could be implemented at an intersection with high traffic demand and 50–60% MPR. The findings of this study are expected to contribute to the field implementation of the CTR algorithm to improve the traffic network performance. Copyright © 2017 John Wiley & Sons, Ltd.     

Improved driver responses at intersections with red signal countdown timers

Traffic Signal Countdown Timers (TSCTs) are innovative, practical and cost effective technologies with the potential to improve efficiency at signalized intersections. The purpose of these devices is to assist motorists in decision-making at signalized intersections with real-time signal duration information. This study focused specifically on driver responses in the presence of a Red Signal Countdown Timer (RSCT). A Linear Mixed Effect (LME) model was developed to predict the effect of RSCT on the headway of the first vehicle waiting on a red signal. The model predicted 0.72 s reduction in the headway of the first queued vehicle resulting from the presence of RSCT, while the observed difference in mean headway was 0.82 s. This result is suggestive of a reduction in start-up lost time at signalized intersections, i.e., an improvement in signalized intersection efficiency when an RSCT is present.     

港口企业工作流程与财务管理的关系

财务管理是港口企业管理的重要部分。分析了港口企业工作流程存在的问题。阐述了工作流程在港口企业管理中的应用,工作流程与财务管理的关系。以求通过规范工作流程来规范财务管理,提高企业创造价值的能力。     

Optimum routing of battery electric vehicles: Insights using empirical data and microsimulation

This study investigates the energy consumption impact of route selection on battery electric vehicles (BEVs) using empirical second-by-second Global Positioning System (GPS) commute data and traffic micro-simulation data. Drivers typically choose routes that reduce travel time and therefore travel cost. However, BEVs’ limited driving range makes energy efficient route selection of particular concern to BEV drivers. In addition, BEVs’ regenerative braking systems allow for the recovery of energy while braking, which is affected by route choices. State-of-the-art BEV energy consumption models consider a simplified constant regenerative braking energy efficiency or average speed dependent regenerative braking factors. To overcome these limitations, this study adopted a microscopic BEV energy consumption model, which captures the effect of transient behavior on BEV energy consumption and recovery while braking in a congested network. The study found that BEVs and conventional internal combustion engine vehicles (ICEVs) had different fuel/energy-optimized traffic assignments, suggesting that different routings be recommended for electric vehicles. For the specific case study, simulation results indicate that a faster route could actually increase BEV energy consumption, and that significant energy savings were observed when BEVs utilized a longer travel time route because energy is regenerated. Finally, the study found that regenerated energy was greatly affected by facility types and congestion levels and also BEVs’ energy efficiency could be significantly influenced by regenerated energy.     

A framework for user- and system-oriented optimisation of fuel efficiency and traffic flow in Adaptive Cruise Control

Fully automated vehicles could have a significant share of the road network traffic in the near future. Several commercial vehicles with full-range Adaptive Cruise Control (ACC) systems or semi-autonomous functionalities are already available on the market. Many research studies aim at leveraging the potential of automated driving in order to improve the fuel efficiency of vehicles. However, in the vast majority of those, fuel efficiency is isolated to the driving dynamics between a single follower-leader pair, hence overlooking the complex nature of traffic. Consequently fuel efficiency and the efficient use of the roadway capacity are framed as conflicting objectives, leading to fuel-economy control models that adopt highly conservative driving styles.This formulation of the problem could be seen as a user-optimal approach, where in spite of delivering savings for individual vehicles, there is the side-effect of the deterioration of traffic flow. An important point that is overlooked is that the inefficient use of roadway capacity gives rise to congested traffic and traffic breakdowns, which in return increases energy costs within the system. The optimisation methods used in these studies entail high computational costs and, therefore, impose a strict constraint on the scope of problem.In this study, the use of car-following models and the limitation of the search space of optimal strategies to the parameter space of these is proposed. The proposed framework enables performing much more comprehensive optimisations and conducting more extensive tests on the collective impacts of fuel-economy driving strategies. The results show that, as conjectured, a “short-sighted” user-optimal approach is unable to deliver overall fuel efficiency. Conversely, a system-optimal formulation for fuel efficient driving is presented, and it is shown that the objectives of fuel efficiency and traffic flow are in fact not only non-conflicting, but also that they could be viewed as one when the global benefits to the network are considered.     

基于ADC模型的炮兵指挥信息系统效能评估

ADC模型是一种常用的解析评估方法，其数学过程严格，所获得的效能分析结果含义明确，被认为是有效、通用的模型。利用ADC模型对炮兵指挥信息系统进行了静态效能评估，分析了系统的有效性、可信赖性，得到了评估炮兵指挥信息系统的一种方法。     

Have Emission Control Areas (ECAs) harmed port efficiency in Europe?

Ports in the European Union and North America have enforced environmental regulations on controlling SO_x and NOx emissions from ships in their coastal areas known as Emission Control Areas (ECAs). This study uses two-stage approaches to examine whether ECA regulations impact the efficiency of ports operating in such areas. First, port efficiencies are estimated using non-radial slacks-based measure (SBM) Data Envelopment Analysis (DEA) models. The efficiency scores estimated by the SBM DEA models are then regressed on explanatory variables, including the ECA factor, and macroeconomic indicators using bootstrapped truncated regression (BTR) models. Panel data is collected on countries in EU ECAs and non-ECAs regarding such input variables as capital and labor, with cargo as an output variable. The results indicate that ECA regulations can harm port efficiency, reflecting concerns of policy-makers and industrial managers: the average efficiency loss from an ECA designation amounts to 0.058–0.066 on a scale of 0–1, accounting for a 15–18% loss from ECA ports’ average efficiency scores.     

Real-time route diversion control in a model predictive control framework with multiple objectives: Traffic efficiency,emission reduction and fuel economy

In this paper, the route recommendation provided by the traffic management authority, rather than the uncontrollable bifurcation splitting rate, is directly considered as the control variable in the route guidance system; a real-time en-route diversion control strategy with multiple objectives is designed in a Model Predictive Control (MPC) framework with regard to system uncertainties and disturbances. The objectives include not only traffic efficiency, but also emission reduction and fuel economy, which respectively correspond to minimizing the total time spent (TTS), total amount of emissions and fuel consumption for all vehicles moving through a network. In the MPC framework, the routing control problem is transformed to be a constrained combinational optimization, which is solved by the parallel Tabu Search algorithm. Two representative traffic scenarios are tested, and the simulation results show: (1) The room for improvement in each objective by means of route diversion control is not consistent with each other and varies with the utilized traffic scenario. In the peak hour, the routing control can lead to significant improvements in TTS and fuel economy, while a relatively small improvement in emission reduction is achieved; in the off-peak hour, however, it is opposite, which indicates that routing is possibly dispensable from the aspect of improving traffic efficiency, but is required from the aspect of emission reduction. (2) The conflict among the multiple objectives varies with the utilized traffic scenario in route diversion control. Improving traffic efficiency often conflicts with emission reduction in both scenarios. For the objectives of traffic efficiency and fuel economy, they are not conflicting in peak hour, while in the off-peak hour, the two objectives are likely conflicting, and the improvement in one objective can lead to the degradation in the other objective. (3) Regardless of the scenarios of peak hour or off-peak hour, the proposed control strategy can result in a proper trade-off among the three chosen objectives.     

Airline energy efficiency measures considering carbon abatement: A new strategic framework

In this paper, airline energy efficiency is divided into two stages: Operations Stage and Carbon Abatement Stage. This new two-stage operating framework is a modification of existing ones. Then the model, Network SBM with weak disposability, is presented to evaluate the efficiency of 22 international airlines from 2008 to 2012. The results show that: (1) Most airlines’ energy efficiencies have not declined in the period. (2) The average efficiency of European airlines is higher than that of non-European airlines. (3) Non-European airlines have smaller advancements in efficiency score than European airlines. (4) Most airlines’ efficiencies in Operations Stage are higher than Carbon Abatement Stage.     

When it comes to container port efficiency,are all developing regions equal?

In this paper we carry out a container port performance analysis of the developing world between 2000 and 2010, using both parametric and nonparametric approaches. From a unique dataset – our sample covers 70 developing countries, 203 ports, and 1750 data points–, we examine the evolution and drivers of productivity and efficiency changes across developing regions. We show that productivity growth rates between 2000 and 2010 vary significantly and that this heterogeneity is explained by pure efficiency changes rather than scale efficiency of technological changes. Therefore, we carry out a detailed efficiency analysis to determine the drivers of port efficiency. Time series results show an upward trend for port efficiency in developing regions, as it increased from 51 percent in 2000 to 61 percent in 2010. Our analysis indicates that private sector participation, the reduction of corruption in the public sector, improvements in liner connectivity and the existence of multimodal links increase the level of port efficiency in developing regions.