某船MAN B＆W柴油机主润滑油温度波动故障分析

某船右主机主润滑油进口温度出现较大范围波动由来已久,由于其温度波动在许可范围内．未引起足够重视．后经故障机理分析．解决了存在达12年之久的问题。     

机械系统故障分析及控制策略研究

文章从工质、材料与零部件方面来分析机械系统的故障机理及控制策略,对掌握系统的故障根源,实施主动性的维修对策是十分有利的。     

船用旋转机械的振动特征故障诊断

文章介绍了基于振动特征的船用旋转机械故障诊断的理论基础,分析了转子不平衡故障诊断技术,并以船用离心泵为例阐述了诊断方法,证明该技术是简便可行的。     

RBF神经网络在柴油机燃油系统故障诊断中的应用研究

本文主要介绍了径向基（RBF）神经网络在柴油机燃油系统故障诊断中的应用,并且首次将神经网络和虚拟仪器技术相结合,成功用于柴油机故障诊断中。比较了RBF和误差反传（BP）神经网络的学习速度和诊断精度。研究表明,将RBF神经网络和虚拟仪器相结合进行柴油机故障诊断具有良好的诊断效果和精度,有很好的工程应用前景。     

烟台某工程循环水取、排水工程压水试验

为确定烟台某工程地基基岩的渗透特性,阐述水上岩体压水试验的主要操作过程、试验数据处理和试验结果分析评价方法．测定区域内的各岩层的透水率和渗透系数,给出不同风化程度岩层的渗透性评价,为设计提供防渗设计所需参数。     

广州地铁硬岩段土压平衡盾构掘进施工的对策

广州地铁3号线某盾构区间地质条件复杂,既有极为松软的淤泥质土、砂层,又有坚硬的微风化混合岩、辉绿岩等.分析盾构机在硬岩段掘进中刀具磨损的原因,并主要通过对盾构掘进参数设定、姿态控制、泡沫使用等方面的研究,提出在广州地区硬岩段土压平衡盾构掘进的施工措施.     

聚氨酯复合改性沥青的制备与性能研究

为改善聚氨酯(PU)改性沥青的性能,实现其在道路工程领域的应用,将PU、岩沥青(RA)和基质沥青(BA)按照自定的室内工艺流程制备得到PU复合改性沥青,并探讨了制备工艺参数的适宜性.采用针入度、软化点、延度和旋转黏度试验优化了PU和RA的掺配方案,基于胶体理论分析了PU复合改性沥青的温度敏感性;利用动态剪切流变(DSR...     

基于HMM-SVR的船舶动力设备故障模式识别与状态预测研究

船舶动力设备因故障监测信号样本少、变化缓慢且数据特征呈非线性,使得设备故障模式的准确识别和状态预测比较难。鉴于此,文章研究了基于隐马尔科夫模型的故障模式识别方法,利用该模型将微弱变化的信号特征转换为变化较大的对数似然概率对故障模式实现有效识别。在此基础上进一步提出基于HMM-SVR的设备状态预测模型,将遗传算法用于支持向量回归模型参数寻优,并结合隐马尔科夫模型,实现对设备状态的预测。对船用柴油机进行仿真,结果表明上述模型具有较高的识别率,能准确预测船舶动力设备的当前状态。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

预制桩在岩石地基中的应用

在淤泥层较厚持力层为岩石地基的地质条件下,常采用冲、钻孔灌注桩嵌岩,但在施工过程中塌方塌孔严重、安全性差,如何突破预制桩本身具有无法穿过孤石和滚石的特性,实现嵌岩是工程中需要研究的问题。结合实际工程设计与施工,根据工程地质和荷载情况,通过采用不同的桩体及桩靴形式,成功实现预制桩在岩石地基中嵌岩的目标。