洋流作用下悬浮隧道动力学行为试验研究

本研究根据相似准则和试验条件设计试验模型。在试验模拟的1节悬浮隧道管段上分别布置2组和3组锚索支撑,测试在不同流速条件下,悬浮隧道管体结构的环向应变、轴向应变及张力腿锚索的轴力。根据试验结果,初步分析悬浮隧道应力的空间分布特征和张力腿的轴力情况;给出在相同环境条件下,张力腿锚索数量对结构应力的影响、洋流速度对悬浮隧道管段结构变形和张力腿轴力的影响关系等。     

基于UML的引俄潜艇技术保障信息系统分析

应用先进保障机制和信息化保障手段有机结合的方法,通过深入调查当前引俄潜艇技术保障存在的实际问题,对引俄潜艇技术保障中的主要要素进行简要分析,运用统一建模语言(UML)完成了信息系统的分析。通过系统应用提高了引俄潜艇的技术保障能力,提升了该类装备作战能力,并呈现军事经济效益。     

物流产业的非差异性定价模型研究

物流产业中的活动主要是依靠物流网络采实现的,同时,物流产业的竞争又体现在物流企业的定价策略上,本文运用博弈论原理和方法,结合我国具体环境,建立了物流产业中非差异性的物流网络定价模型,在此基础上,对非差异性物流网络定价从经济学的角度进行了深入分析。最后,从政府的角度对物流产业的非差异性定价提出了建设性的建议。     

基于HMM-SVR的船舶动力设备故障模式识别与状态预测研究

船舶动力设备因故障监测信号样本少、变化缓慢且数据特征呈非线性,使得设备故障模式的准确识别和状态预测比较难。鉴于此,文章研究了基于隐马尔科夫模型的故障模式识别方法,利用该模型将微弱变化的信号特征转换为变化较大的对数似然概率对故障模式实现有效识别。在此基础上进一步提出基于HMM-SVR的设备状态预测模型,将遗传算法用于支持向量回归模型参数寻优,并结合隐马尔科夫模型,实现对设备状态的预测。对船用柴油机进行仿真,结果表明上述模型具有较高的识别率,能准确预测船舶动力设备的当前状态。     

几种典型的大型集装箱船导轨结构特性对比计算分析

本文以固定装载型式导轨和混合装载型式导轨为研究对象,基于有限元方法分析了不同集装箱装载工况对导轨强度、刚度的影响,同时在相同集装箱装载工况下,对不同导轨的强度、刚度进行了对比分析。结果可为集装箱导轨的设计优化提供了一定的参考。     

双月池对某援潜救生船运动性能及波面升高的影响

介绍某援潜救生船配设双月池的船型特点,规划双月池和不带月池2种方案来评估双月池开口对援潜救生船船体运动性能的影响。采用三维势流理论对2个方案的运动性能进行计算,得到船体运动响应函数,对船舶运动性能进行短期预报,研究总结双月池效应对援潜救生船运动的影响规律。对比双月池内水面和舷外波面升高的情况,比较两个位置处波面升高的差异性,总结双月池波面升高对潜水钟收放的影响。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。     

分离式桥现浇连续箱梁钢管支架施工方案

文章以陈家田分离式桥现浇连续箱梁满堂钢管支架施工为例,介绍了在山区软质地基上进行现浇预应力连续箱梁满堂钢管支架施工的总体布置方案,并通过支架力学检算验证了施工方案的可行性,同时阐述了支架地基处理、支架装拆及加载预压等施工过程。