三峡库区船舶碰撞能量损失方法的研究

采用外部碰撞力学方法计算2艘2 000 t级化学品船以不同速度,不同碰撞角,在不同碰撞点相撞后的能量损失,并利用显示动力有限元软件LS_DYNA模拟2艘化学品船在能量损失最大情况下碰撞的响应.     

热油泵机械密封泄漏原因及对策

冷却系统结垢后,摩擦副端面温度过高,这是导致热油泵机械密封失败的根本原因.采取软化水夹套冷却和新增静环背冷等措施,可降低摩擦副端面温度,从而解决密封泄漏的问题.     

A substitute model of two-dimensional dry friction exposed to dither generated by rolling contact of wheel and rail

Dither generated by rolling contact of wheel and rail smoothes dry friction damping provided by the primary suspension dampers of freight wagons and it should be taken into account in numerical simulations. But numerically the problem is non-smooth and this leads to long execution time during simulation, especially when the vehicle with friction dampers is modelled in the environment of an multi-body system simulation program, whose solver has to cope with many strong non-linearities. The other difficulty is the necessity of handling within the code a number of big volume files of recorded dither sampled with high frequency. To avoid these difficulties, a substitute model of two-dimensional dry friction exposed to dither is proposed that does not need application of dither during simulation, but it behaves as if dither were applied. Due to this property of the model, the excitation of the vehicle model by track irregularities may be supplied as low-frequency input, which allows fast execution and, the necessity of handling high-volume files of recorded dither is avoided. The substitute model is numerically effective. To identify parameters of the substitute model, a pre-processing employing a sample of the realistic dither is carried-out on a simple two-degrees-of-freedom system. The substitute model is anisotropic, describing anisotropic properties of the two-dimensional friction arising in the presence of one-dimensional dither. The model may be applied in other branches of engineering, for example, in mechatronics and robotics, where application of dither may improve the accuracy of positioning devices.     

摩擦焊在十吨挂车车轴焊接中的应用

摩擦焊技术以其可靠的工艺、稳定的质量、安全的使用性在汽车零部件制造中得到认可。摩擦焊过程参数控制和工艺验证，是保证挂车车轴焊接可靠性的重要条件，对挂车车轴生产质量的稳定起着关键性作用。     

Analysis on Ground Surface Deformation and Influence of Construction Parameters Caused by Two Different Shield Machines in Double-tube Tunnelling北大核心CSCD

Based on a shield-driven running tunnel project of Hangzhou Metro Line 2, this paper carries out field measuring of the ground surface deformation caused by two different shield machines in double-tube tunnelling in soft soil areas, obtains the laws of the surface deformation caused by shield-driven double-tube tunnelling and verifies the applicability of the modified Peck formula to double-tube tunnelling. The results show that in soft soil areas the impacts on ground surface deformation caused by different shield construction parameters in the previously and subsequently excavated tunnels are different, while the surface deformation changes sharply before and after the shield machine passing through the cutting face, and a rebound phenomenon occurs when the shield tail passes through the cutting face due to the influence of the grouting; The cutterhead torque of the shield machine in soft soil areas can be composed of five calculation factors, and the calculation results are in good agreement with the measured values. The larger the opening rate of the shield cutterhead is, the larger the average torque value will be, the higher the percentage of large ground loss rate will be, and the larger the maximum ground surface settlement will be; The ratio of cutterhead torque T to mucking volume per ring Q is used as the control parameter for analyzing the ground surface settlement, and a certain positive correlation between the ratio and the surface settlement value is determined, the smaller the cutterhead opening rate is, the more accurate the fitting results will be. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

齿轮箱的失效原因与振动诊断

齿轮箱是各类机械设备通常具备的变速传动部件，齿轮和齿轮箱的工作状态的好坏直接影响整个机械系统的工作，它们的故障往往是造成系统不能正常运转的常见原因之一，所以它们的制造质量、工作平稳性和噪声是机器制造质量的重要标志。文章介绍了柴油机齿轮箱的失效形式和原因，并通过振动监测具体分析了某齿轮箱的故障。     

Multibody dynamics modelling of the freight train bogie system

Previous work in the railway technology laboratory at Virginia Polytechnic Institute and State University (Virginia Tech) focused on better capturing the dynamics of the friction wedge, modelled using three-dimensional rigid body dynamics with unilateral contact conditions. The current study extends the previous work to a half-bogie model treated as an application of multibody dynamics with unilateral contact to model the friction wedge interactions with the bolster and the sideframe. The half-bogie model was derived using MATLAB and functions as a three dimensional, dynamic, and multibody dynamics model comprised of four rigid bodies: a bolster, two friction wedges, and a sideframe assembly. This expanded model allows each wedge four degrees of freedom: vertical displacement, longitudinal displacement (between the bolster and sideframe), pitch (rotation around the lateral axis), and yaw (rotation around the vertical axis). The bolster and the sideframe are constrained to have only the vertical degree of freedom. The geometry of these bodies can be adjusted for various simulation scenarios. The bolster can be initialised with a pre-defined yaw (rotation around the vertical axis) and the sideframe may be initialised with a pre-defined pitch/toe (rotation around the lateral axis). The results of the multibody dynamics in half-bogie model simulation are shown in comparison with results from NUCARS^®, an industry standard in train-modelling software, for similar inputs.     

铝电源线在轻型商用车上的应用研究

本文从铝电源线的制造工艺、基本参数、外防护、理论计算和台架测试等方面进行分析,论证其在轻型商用车上代替铜电源线的可行性。     

采用计轴系统叠加轨道电路解决分路不良的探索与应用

主要针对站内轨道电路分路不良问题进行实际分析,利用计轴技术的优点,采用计轴系统叠加轨道电路作为解决轨道电路分路不良的方案。计轴系统通过对轨道区段两端计轴检测点统计的轴数进行比较,确认区段是否空闲,并控制相应的轨道继电器、实现自动检查区段状况;同时,合理地与既有电气集中设备有机结合,彻底解决分路不良问题,最大限度地保证行车安全。     

疏浚管路阻力损失计算方法的分析

管道输沙阻力损失计算是江河湖泊、港口航道疏浚工程中的一个基本问题,它是设计管道浆体输送系统的重要参数,直接关系到动力设备的选型和运行的能耗.文章重点以疏浚工程中泥沙的输送为研究对象,对管内两相流动的阻力特性及临界流速问题进行了初步研究,并实验研究了泥沙在不同的浓度和速度下的阻力特性,对3种模型的阻力损失计算模型进行了检验、分析和评价.结果表明Jufin＆Lopatin是一个比较好的计算模型.对于颗粒的不均匀性的影响,科学的方法能提高计算模型的计算精度.