摩擦焊在十吨挂车车轴焊接中的应用

摩擦焊技术以其可靠的工艺、稳定的质量、安全的使用性在汽车零部件制造中得到认可。摩擦焊过程参数控制和工艺验证，是保证挂车车轴焊接可靠性的重要条件，对挂车车轴生产质量的稳定起着关键性作用。     

一种轻型天线稳定平台的设计

介绍了一种适用于大振动、冲击、强电磁干扰、倒单摆式大惯量负载等特殊要求的轻型天线稳定平台的机电一体化设计.可对类似的应用提供有用的借鉴.     

Multibody dynamics modelling of the freight train bogie system

Previous work in the railway technology laboratory at Virginia Polytechnic Institute and State University (Virginia Tech) focused on better capturing the dynamics of the friction wedge, modelled using three-dimensional rigid body dynamics with unilateral contact conditions. The current study extends the previous work to a half-bogie model treated as an application of multibody dynamics with unilateral contact to model the friction wedge interactions with the bolster and the sideframe. The half-bogie model was derived using MATLAB and functions as a three dimensional, dynamic, and multibody dynamics model comprised of four rigid bodies: a bolster, two friction wedges, and a sideframe assembly. This expanded model allows each wedge four degrees of freedom: vertical displacement, longitudinal displacement (between the bolster and sideframe), pitch (rotation around the lateral axis), and yaw (rotation around the vertical axis). The bolster and the sideframe are constrained to have only the vertical degree of freedom. The geometry of these bodies can be adjusted for various simulation scenarios. The bolster can be initialised with a pre-defined yaw (rotation around the vertical axis) and the sideframe may be initialised with a pre-defined pitch/toe (rotation around the lateral axis). The results of the multibody dynamics in half-bogie model simulation are shown in comparison with results from NUCARS^®, an industry standard in train-modelling software, for similar inputs.     

提速车辆转向架橡胶球铰刚度分析

根据提速客车转向架橡胶球铰的结构特点，结合橡胶的本构模型及相关系数，利用ABAQUS软件对其径向刚度、轴向刚度、偏转刚度和扭转刚度进行了分析，并将计算结果和试验结果进行了比较。结果表明：计算结果和试验结果具有较好的一致性，利用有限元分析能指导橡胶球铰及同类产品的结构设计。     

铝电源线在轻型商用车上的应用研究

本文从铝电源线的制造工艺、基本参数、外防护、理论计算和台架测试等方面进行分析,论证其在轻型商用车上代替铜电源线的可行性。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

考虑复合地基侧摩阻力作用下土中竖向应力解

为了估算新建路基对既有路基影响,以半无限体内Mindlin应力方程解为计算基础,假设复合地基为一个加固整体,对复合地基侧壁摩阻力进行积分,推导复合地基侧摩阻力在土体中引起的附加应力的解析表达式,计算在复合地基作用下距填筑坡脚处一点的土竖向附加应力。     

Experimental study of the airside performance for interrupted fin-and-tube heat exchanger with hydrophilic coating under dehumidifying conditions

The airside heat transfer and friction characteristics of seven interrupted fin-and-tube heat exchangers with hydrophilic coating under dehumidifying conditions are experimented. The effects of number of tube rows, fin pitch and inlet relative humidity on airside performance are analyzed. The test results show that the influence of fin pitch on the friction characteristic under dehumidifying conditions is similar to that under dry surface, and the friction factors decrease slightly with the increase of number of tube rows. The heat transfer performance decreases as fin pitch and number of tube rows increases. The heat transfer performance and the friction characteristic are independent of inlet relative humidity. Based on the test results, heat transfer and friction correlations in terms of the Colburn j factor and Fanning f factor, are proposed to describe the airside performance of the interrupted fin geometry with hydrophilic coating under dehumidifying conditions. The correlation of the Colburn j factor gives a mean deviation of 9.7%, while the correlation of the Fanning f factor shows a mean deviation of 7.3%.     

自锁原理在混凝土块体安装机械中的应用

孟加拉Mirsarai海岸防护项目工程护底块体采用100 cm×80 cm×60 cm长方体混凝土块体。在块体生产堆放过程中,须采用夹块机运输,但在安装时由于该护底块未设计吊钩,故无法采用吊车安装,只能用长臂挖机安装液压夹进行夹块安装。液压夹故障率较高,且夹块困难,安放时力度不好控制,容易造成块体间的碰撞损伤。为此,对现有的机械设备做出改进,根据物理学中的静摩擦自锁现象,制作出自锁型夹子。该夹子在夹块时仅仅依靠夹子橡胶复合结构和混凝土块自身重力产生的摩擦力夹紧块体,而安放时仅须旋转挖机斗改变受力钢丝绳来松开块体,无须人员辅助,有效地解决了块体安装过程中机械伤的问题。同时,由于自锁型夹子制作简单、维修方便,因此提高了生产效率、降低了成本。     

沥青路面微表处抗剪性能试验研究

通过直剪试验并结合理论计算对沥青路面微表处的抗剪性能进行研究,研究表明:夏李高温时,微表处的抗剪强度可以抵抗极端不利条件下的车轮剪切力;在最佳油石比±1％的范围内,微表处抗剪强度不会随油石比的增加而减小;界面污染或界面有水会减小微袁处与旧路面的粘结力.