双线自动闭塞区段旅客列车扣除系数计算方法的探讨

本文对旅客列车影响区和非影响区进行了分析，进而确定了非影响区及影响区内可铺画的货物列车数，提出了双线自动闭塞区段旅客列车扣除系数的分析计算方法。     

250km／h高速铁路轨道不平顺的安全管理

利用根据车辆－轨道耦合动力学思想所建立车辆－轨道垂横耦合模型,在充分考虑多种波长并存的情况下,仿真计算了250km/h高速铁路各种轨道不平顺的管理目标值。计算结果与日本和德国高速铁路轨道不平顺的经验管理目标值基本一致。     

浅插法大直径钢圆筒在换砂振沉施工中的应用

大直径钢圆筒凭借其特有的优势被应用在大型人工岛护岸项目中.以某大型人工岛项目为例,针对浅插法大直径钢圆筒施工中遇到的一些实际问题进行方案比选.通过对振沉方法、纠偏方式、振沉顺序等技术方案的分析对比,总结出浅插法大直径钢圆筒在换砂基础中应用的主要工艺:点振法振沉工艺、起重船纠偏工艺和顺、跳打振沉顺序.     

预成孔置换强夯法处理大型油罐软基工程应用

建设大型油罐软基处理的重点在于控制工后沉降和差异沉降,但普通强夯置换法存在置换墩体着底情况不良与地基工后沉降量大的问题,针对这个问题进行了普通置换强夯法的改进研究。采取预成孔工艺能解决墩体着底情况不良的问题,从而减少地基工后沉降量。预成孔置换强夯法是一种用于处理软弱土地基的施工工艺,具有工期短、造价低与绿色环保等优点,通过预成孔保证置换墩着底可靠性,从而成功控制了工后沉降和差异沉降,实际检测结果和充水预压试验证实了处理方案的可靠性。     

拱墩降温对大跨桥上连续式无砟轨道竖向位移影响分析

受季节和日照的影响,高墩大跨拱桥混凝土结构会出现膨胀现象,从而引起桥墩顶部竖向位移的变化。为了研究拱墩降温对高墩大跨拱桥上连续式无砟轨道竖向位移和高低不平顺的影响,根据桥上连续式无砟轨道的结构和受力特征,参考国内某大跨度上承式钢筋混凝土拱桥的实际参数,利用有限元方法,建立线-桥-墩一体化模型,分析拱墩降温对大跨拱桥上连续式无砟轨道的竖向位移和高低不平顺的影响。结果表明:拱墩降温引起的大跨桥上线路竖向位移较明显,设计时不可忽略;拱墩降温会引起线路高低不平顺,且对长波不平顺影响最严重;线路高低不平顺随降温幅度增加而增大,在年温差较大的地区目前不建议高墩大跨拱桥与连续式无砟轨道配合设计使用。     

贮存系统的联合维修策略

为了保证贮存系统的可用性,需要对其故障与否进行检测,针对该问题提出了包含定期检查和预先更换的维修策略。为了协调部件更换和备件供应,联合考虑了连续检查的（0,1）订货策略,所以联合维修策略包括维修策略和备件供应策略。基于联合策略建立了一个规划模型,在满足可用度约束条件下最小化平均总费用。基于更新过程,推导了贮存系统服从一般寿命分布的性能指标。以威布尔寿命分布为例,结果表明联合策略比独立策略更有效。     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

An algorithm for oceanic front detection in chlorophyll and SST satellite imagery

An algorithm is described for oceanic front detection in chlorophyll (Chl) and sea surface temperature (SST) satellite imagery. The algorithm is based on a gradient approach: the main novelty is a shape-preserving, scale-sensitive, contextual median filter applied selectively and iteratively until convergence. This filter has been developed specifically for Chl since these fields have spatial patterns such as chlorophyll enhancement at thermohaline fronts and small- and meso-scale chlorophyll blooms that are not present in SST fields. Linear Chl enhancements and localized (point-wise) blooms are modeled as ridges and peaks respectively, whereas conventional fronts in Chl and SST fields are modeled as steps or ramps. Examples are presented of the algorithm performance using modeled (synthetic) images as well as synoptic Chl and SST imagery. After testing, the algorithm was used on > 6000 synoptic images, 1999–2007, to produce climatologies of Chl and SST fronts off the U.S. Northeast.     

重箱堆场地下管网施工

重箱堆场作为集装箱码头后方的存储腹地,对集装箱的储运起着十分重要的作用。文章表明,在重箱堆场施工过程中,对地下管网施工,如何选择有效的施工方法,安排控制好相关工序的衔接,是保证重箱堆场工程有条不紊进行,确保施工进度与质量的重中之重。     

轨道不平顺数值模拟方法

为了提高将轨道功率谱密度函数(PSD)通过数值模拟方法转换为时域样本的可靠度,分析了国内外常用的轨道不平顺数值模拟方法的模拟原理和步骤,采用计算机仿真程序模拟出各种方法生成的时域样本,并以此作为车辆垂向动力学模型的输入激励,通过数值仿真得出系统的时间-响应历程。各种模拟方法模拟结果比较表明采用各种方法模拟出的轨道不平顺时域样本是正确的,用三角级数法和逆Fourier变换法模拟出的时域样本的离散度较小,而用白噪声滤波法和二次滤波法模拟的时域样本离散度较大,因此后两种方法模拟出的轨道不平顺时域样本不宜作为研究系统时域响应时的轨道激励。