A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

基于模糊综合评价法的城市综合管廊结构健康评价方法研究

为解决城市综合管廊结构健康状况评估结果无法量化和指导运维的问题，通过分析模糊综合评价理论在交通隧道结构健康评价方法研究中的应用，依照类比思想，利用该理论建立城市综合管廊结构健康状况评价体系。首先，依据有关养护规定和调研结果，基于不同需求分别建立管廊结构的本体完好状况和本体结构状况评价指标体系； 其次，以交通隧道和综合管廊养护经验为基础，划分各指标的分级判定标准； 然后，采用层次分析法，计算评价指标的权重分配； 最后，采用柯西分布型隶属函数和矩阵型隶属函数确定各指标的隶属度，建立一级和二级模糊综合评价模型，赋予评价向量中各评语相应分值，将评价向量单值化，判定管廊结构健康状况。采用所提出的评价方法应用于实际工程，所得评价结果与经验评判得到的结果相同。     

武汉港阳逻港区多式联运发展思路

多式联运能够充分发挥各种运输方式的综合优势,对于推动物流业降本增效、完善现代综合交通运输体系具有积极意义。武汉港阳逻港区具备发展多式联运的各项要素,但缺乏对多式联运发展的系统性规划,港区多式联运发展相对滞后,综合交通优势尚未有效发挥。通过总结典型案例的发展经验,结合港区内外部综合因素,思考港区多式联运发展思路,探讨港区多式联运的布局规划以及综合服务的提升,并提出相关建议。     

Vehicle electrification in a developing country: Status and issue,from a well-to-wheel perspective

The increase of public attention, scientific research and political interest in environmental problems associated with transportation has provided the motivation for re-invention of electric vehicles. However the usage of grid-dependent EVs with a high-carbon electricity grid might produce more damage to the environment. This study aims to provide an environmental impact comparison of ICEVs, HEVs and EVs during their usage cycle, by modeling their energy consumption (electricity or fuel) and the supply chains of the supplied energy, (well-to-wheel) based on a life cycle assessment. The results show that running EVs with the existing mixed sources of electrical energy produce larger impacts on the environment 60% of the time; when compared to HEVs. When compared to ICEVs, EVs produce a larger environmental impact on 7 out of 15 environmental impact categories. Overall the environmental impacts of EVs are substantial based on the well-to-wheel analysis. It will continue to be so if no change is made to the methods of electricity generation in the near future. Given that the environmental profile of EVs is linked with the existing national electricity generation mix, the national electricity supply must be made cleaner before the electrification of the urban transport system.     

Effectiveness of travel time reliability indicators in the light of the assessment of dynamic managed lane strategy

ABSTRACT

The aim of traffic management is to ensure a high quality of service for a maximum number of users by decreasing congestion and increasing safety. Uncertainty of travel times decreases the quality of service and leads end users to modify their plans regardless of the average travel time. Indicators describing travel time reliability are being developed and should be used in the future both for the optimization and for the assessment of active traffic management operations. This article discusses the efficiency of certain reliability indicators in an ex-post assessment of a traffic management strategy. Ex-post assessment is based on an observational before–after study. As some factors other than the studied management strategy may intervene between the two periods, and as most reliability indicators require knowledge of the full travel time distribution and not only its average, a methodology is developed for the identification of the impact of these exogenous factors on the whole distribution. Many reliability indicators are split into different parts allowing the identification of the part due to the management strategy impact. The methodology is tested numerically on a managed lane operation consisting of Hard Shoulder Running (HSR) at rush hour on a section of a French motorway. The variation of some reliability indicators appears misleading, whereas the splitting of the indicators increases our understanding of the strategy and highlights its impact. The paper gives the reliability assessment of the HSR field test and discusses different reliability indicators to identify their potential performances and shortcomings.     

基于SHEL和三角模糊数理论的地铁钻爆法施工安全评价方法研究

为合理应用决策数据中不同专家的背景知识,找出地铁施工过程中安全测评体系的关注重点,根据地铁施工的特点和SHEL安全模型理论,建立以人-软件(L-S)、人-硬件(L-H)、人-环境(L-E)和人-人(L-L)4个环节为基础的钻爆法地铁施工安全指标体系。请专家给出指标语义评价等级和指标权重语义评价等级,并根据其与三角模糊数的对应关系分别得出三角模糊数评价值。针对不同专家的重要性程度差异,提出基于三角模糊数的群一致性评价方法,得出专家综合权重,集结评价数据,最终得到安全评价结果。最后,对青岛地铁1号线过海段进行实例分析。结果表明,该方法可以解决群评价过程中专家个体权威与群体共识难以兼顾的问题,能够充分利用群决策中的原始评价信息,提高地铁施工安全水平评价的准确性。     

布达佩斯城市交通发展战略与启示

分别从概况、战略目标、实施策略等3个方面对布达佩斯城市交通发展的总体战略及公共交通、道路网络、静态交通、步行及自行车交通、交通管理等发展战略进行了阐述。由此得出,居民出行线路上任何一种交通方式的低效都将破坏整个交通链的效率,只有整个交通链所有交通环节的和谐发展,才能够使公共交通在运输服务上较小汽车具有竞争力;只有综合利用公共交通与私人交通,才能使城市交通与土地利用相协调。最后,结合布达佩斯和国内实践经验,总结提出了一种包含人口、经济、地理、环境、技术、制度等要素的“六棱形”城市交通发展战略规划模型。     

基于决策偏好的ETC系统评价指标体系及评价方法

为更好地反映不同决策者对电子收费系统（ETC）评价的偏好,从政府、运营者和付费者三个主要利益主体的角度对ETC系统的评价指标及评价方法进行了研究。根据评价指标体系筛选原则,确定了基于决策偏好的ETC系统评价指标体系;通过综合分析成本-效益法（CBA）和数据包络分析法（DEA）的各自特点,依据基于决策偏好所确定的评价指标,同时引入当前一些比较好的算法来优化CBA,DEA和AHP法,建立数学模型,从而确立了基于决策偏好的综合评价方法。该方法较为全面地对ETC系统社会经济影响进行评价,所建立的指标体系和方法能更直观、更可靠地反映出决策者的决策偏好。     

公路生态系统服务功能分析及评估

文章探讨了公路生态系统的生态服务功能,提出价值评估指标体系及定量评估方法,为公路生态系统的恢复或重建提供理论依据,对全面、正确评价公路生态系统有积极意义。     

乌鲁木齐市中心城区常规公交乘客满意度研究

乌鲁木齐市中心城区交通日趋拥堵,优先发展公共交通是缓解城市交通拥堵,改善城市交通环境的主要措施。乌鲁木齐市的公共交通主要包括公共汽车和出租汽车,通过实地发放调查问卷、数据处理分析及结合乌鲁木齐市目前的实际情况,运用专家咨询法确定32个指标权重,构建基于综合模糊评价法的常规公交车乘客满意度总评价。获得不同评价结果,并提出改善对策,对乌鲁木齐市的未来常规公交发展起到参考作用。