A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

Cost-time Minimization in a Transportation Problem with Fuzzy Parameters: A Case Study

In real world applications the supply, the demand and the transportation cost per unit of the quantities in a transportation problem are hardly specified precisely because of the changing economic and environmental conditions. It is also important that the time required for transportation should be minimum. In this paper a method has been proposed for the minimization of transportation cost as well as time of transportation when the demand, supply and transportation cost per unit of the quantities are fuzzy. The problem is modeled as multi objective linear programming problem with imprecise parameters. Fuzzy parametric programming has been used to handle impreciseness and the resulting multi objective problem has been solved by prioritized goal programming approach. A case study has been made using the proposed approach.     

中小流域桥梁设计流量的H-C-N法

基于暴雨推求中小流域桥梁设计流量时,设计流量受地理参数、暴雨参数等众多因素的影响,计算公式难以显式表达的情况,采用H-C-N法计算中小流域桥梁设计流量:用层次分析法(Analytic hierarchy process)对影响流量的因素进行分析并筛选出主要因素;用模糊聚类法(Fuzzy clustering)从已知水文站数据集中选取合理的训练样本;运用神经网络方法(Neutral network)建立中小流域桥梁设计流量的隐函数关系式,从而计算出中小流域桥梁的设计流量。用VB.NET编写程序编写H-C-N法计算程序,计算了10座中小流域桥梁的设计流量。结果表明,与广东省法和四院法相比,H-C-N法精度较高,是一种较为科学和实用的算法。     

基于模糊投影决策模型的铁路客运专线融资结构优化研究

通过对融资结构优化决策特点的分析，指出铁路客运专线融资结构优化决策实际上是复杂的多目标决策问题。在此基础上，建立铁路客运专线融资结构优化决策递阶结构模型、决策指标组合权重熵值法与专家主观意见相结合的计算模型以及模糊投影决策评价模型；并编制了决策系统和分析软件；给出了应用实例进行验证，证明此文建立的评价模型能充分利用信息，对表面上看起来复杂的方案进行优劣次序排列，且能使理论和经验结合起来。排序结果能够比较客观公正地反映我国铁路客运专线融资结构的实际情况，可为铁路客运专线的融资结构提供指标评价及方案优选服务，避免因主观原因而造成的决策偏差。     

减摇鳍/水舱联合减摇系统模糊自适应滑模控制

针对减摇鳍和被动式减摇水舱设备在不同航速下的减摇特点,建立了船舶减摇鳍/水舱联合减摇系统的横摇数学模型。结合模糊自适应控制良好的逼近特性和滑模控制算法对扰动和模型参数变化的不灵敏性,设计了减摇鳍/水舱联合减摇系统的模糊自适应滑模控制器。采用实船参数的仿真结果表明,所设计的控制器具有良好的自适应性和鲁棒性,减摇鳍/水舱联合减摇控制系统在不同海况和不同航速下均具有良好的减摇效果。     

基于多层次模糊评价法的船闸引航道基坑开挖风险评估

船闸项目建设过程中的风险因素复杂多样,特别是株洲二线船闸引航道基坑施工面临着与原有一线船闸近、临水度汛造成工期紧等特点。针对这一情况,将层次分析法与模糊综合评价法相结合,采用BIM技术实时复核项目土石方开挖工程量,使风险评价过程更加客观。模糊评价风险评估结果表明,株洲二线船闸引航道基坑开挖的风险较大,存在的主要风险原因要素是:工程环境风险现场管理风险施工作业风险技术因素风险组织与管理等其他风险。评价结果可作为工程实践参考,对船闸工程项目施工的风险控制有一定的参考价值。     

模糊神经网络在汽车发动机电子点火系统故障诊断中的应用

本文针对发动机电子点火系统的五种常见故障,借助发动机综合分析仪测得次级点火波形,并提取特征值,构造了一种模糊神经网络模型,利用MATLAB进行仿真,通过简单测试,得出这种方法是可行的,可以准确快速的诊断出故障原因。     

汽车ABS转弯制动控制模式的研究

简述了防抱死制动系统的工作原理,分析了车辆转弯制动时的动力学模型及模糊控制理论的特点。借助于MATLAB—SIMULINK仿真,得出实验仿真结果。     

基于模糊正交试验的纤维混凝土纤维参数优选

该文以钢纤维体积率、长径比、外形和聚丙烯纤维体积率为因子,安排正交试验研究了混杂纤维各因素对高性能混凝土抗压强度和劈裂抗拉强度的影响,并利用模糊数学理论对正交试验结果进行了分析,得到了混杂纤维混凝土的较优配比。结果表明:纤维各物理参数对纤维高性能混凝土综合性能的影响程度从大到小依次为:钢纤维外形、聚丙烯体积率、钢纤维体积率、钢纤维长径比;基准混凝土中加入长径比为70、体积率为1.5%的端钩形钢纤维和体积率为0.055%的聚丙烯纤维混杂时,对高性能混凝土增强和增韧效果最优。     

基于货运强度变化规律的货运量预测方法

目前我国部分地区货运量统计数据存在收集不全、统计口径不一致及社会经济环境变化大等问题,导致常规的时间序列预测法和回归预测法难以在这些地区应用。鉴于此,分析了国内外货运强度变化的规律,指出人均GDP和第三产业所占比例是影响货运强度的主要因子,提出了通过模糊聚类方法对地区货运发展阶段进行定位,找出其发展阶段所对应的货运强度值,进而提出依据人均GDP和第三产业所占比例进行货运量预测的方法。最后对邢台市的货运量预测进行了实证研究。