超大跨度斜拉桥施工过程力学行为

斜拉桥结构效应在施工过程中具有典型的时空变化特性，但目前对效应的时程特性及时空包络关注较少。建立精细的几何非线性分析模型，分析主跨1088m的苏通大桥施工过程力学行为，包括施工阶段效应增量、效应时程、效应包络及恒载效应。研究结果有助于结构设计和施工控制。     

液氮远洋渔业综合体--浅谈液氮在远洋渔业中的应用

本文从国内远洋渔业现状出发，大胆地提出一个不同于国内外现有远洋渔业捕捞的技术体系想法---液氮远洋渔业综合体，详细介绍了其构成、存在问题及解决方案等技术要点，为国内远洋渔业的发展提供了重要的价值取向。     

Dynamic stride length adaptation according to utility and personal space

Pedestrians adjust both speed and stride length when they navigate difficult situations such as tight corners or dense crowds. They try to avoid collisions and to preserve their personal space. State-of-the-art pedestrian motion models automatically reduce speed in dense crowds simply because there is no space where the pedestrians could go. The stride length and its correct adaptation, however, are rarely considered. This leads to artefacts that impact macroscopic observation parameters such as densities in front of bottlenecks and, through this, flow. Hence modelling stride adaptation is important to increase the predictive power of pedestrian models. To achieve this we reformulate the problem as an optimisation problem on a disk around the pedestrian. Each pedestrian seeks the position that is most attractive in a sense of balanced goals between the search for targets, the need for individual space and the need to keep a distance from obstacles. The need for space is modelled according to findings from psychology defining zones around a person that, when invaded, cause unease. The result is a fully automatic adjustment that allows calibration through meaningful social parameters and that gives visually natural results with an excellent fit to measured experimental data.     

Coloured Petri net-based traffic collision avoidance system encounter model for the analysis of potential induced collisions

The Traffic Alert and Collision Avoidance System (TCAS) is a world-wide accepted last-resort means of reducing the probability and frequency of mid-air collisions between aircraft. Unfortunately, it is widely known that in congested airspace, the use of the TCAS may actually lead to induced collisions. Therefore, further research regarding TCAS logic is required. In this paper, an encounter model is formalised to identify all of the potential collision scenarios that can be induced by a resolution advisory that was generated previously by the TCAS without considering the downstream consequences in the surrounding traffic. The existing encounter models focus on checking and validating the potential collisions between trajectories of a specific scenario. In contrast, the innovative approach described in this paper concentrates on quantitative analysis of the different induced collision scenarios that could be reached for a given initial trajectory and a rough specification of the surrounding traffic. This approach provides valuable information at the operational level. Furthermore, the proposed encounter model can be used as a test-bed to evaluate future TCAS logic changes to mitigate potential induced collisions in hot spot volumes. In addition, the encounter model is described by means of the coloured Petri net (CPN) formalism. The resulting state space provides a deep understanding of the cause-and-effect relationship that each TCAS action proposed to avoid an actual collision with a potential new collision in the surrounding traffic. Quantitative simulation results are conducted to validate the proposed encounter model, and the resulting collision scenarios are summarised as valuable information for future Air Traffic Management (ATM) systems.     

桨-舵间距对其组合系统水动力性能的影响

本文通过CFD方法对敞水桨、桨-舵组合以及优化间距的桨-舵组合装置开展了数值仿真研究，分析了桨-舵间距对其组合系统的水动力性能影响。螺旋桨敞水工况的计算值与物理模型试验值吻合良好，验证了数值计算方法的可行性。通过对比桨-舵间距大于推荐值的三个工况，发现在较低进阶系数下系统的节能效率有稍许增加，然而随着间距的增大，节能效率呈现降低的趋势；在高进阶系数下，随间距增大节能效率逐步降低。适当减小桨-舵间距，在较低和中等进阶系数下，随间距减小节能效率呈现逐步升高的趋势，在间距减少10mm时，组合体的节能效率最大可增加1.937%；不过在高进阶系数下，随间距减小节能效率却有下降趋势。     

复杂载荷下裂纹SIF计算的子模型技术

对船舶与海洋工程结构物进行疲劳评估,首先要通过子模型技术解决复杂应力场中裂纹应力强度因子(SIF)的计算问题。针对子模型技术实现过程繁杂且效率较低的问题,分别提出"逐周分层法","转换矩阵法"及"映射划分法"并基于VBA及APDL语言编写插件MPCarrangerV1.0,FEMcoortransferV1.0及CrackmapperV1.0,解决从Patran整体有限元模型到Ansys子模型时壳体单元间MPC创建低效、不同坐标系间节点位置转换困难及裂纹自由划分的局限性问题。基于DNV及ABS相关规范,以某B型LNG燃料舱的疲劳热点为例,对改进的子模型技术进行验证,结果表明经改进的子模型技术可成功施加合理边界条件并实现SIF的求解,可为子模型技术快速实现复杂载荷下裂纹SIF的准确计算提供参考。     

轨道复合不平顺对无缝线路横向变形的影响分析

轨道复合不平顺会对行车的安全及稳定性产生较大影响,也是影响无缝线路横向变形的一个重要因素。为研究轨道复合不平顺对无缝线路的具体影响,通过构建三维轨道框架非线性有限元模型,采用轨道框架单点(或多点)位置发生横向及竖向位移来模拟复合不平顺状态,通过计算获取节点位移变化规律,进而分析轨道复合不平顺对无缝线路横向变形的影响作用。研究结果表明,轨道的复合不平顺会对无缝线路的横向变形产生显著的影响;当线路出现三角坑等类似病害时,其节点位移变化更为显著,在无缝线路的日常养护维修中应尤为注意。     

铁路沿线城市空间物业开发研究——以宝鸡市南客站核心区站前广场工程为例

为了提升铁路沿线城市空间物业开发的设计手法,结合宝鸡市南客站核心区站前广场工程的设计实践,从系统性设计观、工程性质解析、消防设计思路、空间建构方法、无缝接驳、技术要素等方面进行研究分析,展示将铁路与城市系统进行一体化设计、利用自然资源解决消防和投资问题、平层空间中对多种交通体系的有机组织、不同坐标和高程系统背景下分区域构建柱网、各板块交接处的问题解决等技术成果,总结出同类型建筑的设计思路,力求为该领域的建筑设计发展提供有益的借鉴。     

考虑空车调配协调的货物列车开行方案优化研究

为实现空车调配与货物列车开行方案协调优化，结合基本运行图架构与车流径路，构建货运时空服务拓展网络。考虑配空与装卸取送、集编发等环节的时间接续要求，节点与区段不对流空车要求，以重车流全程运送与空车配送等广义总费用最少为目标，建立整数规划弧路模型。针对既有算法设计局限性，结合重车或空车配空的时间接续要求，提出将不同的 k 短路重车流方案与空车配空方案相关联的改进可行解构造方法，设计混合差分进化求解算法。实例研究表明，考虑空车调配进行重车、空车流组织协调优化，能够减少空车走行费用，及时满足装车需求，有效保证作业车流配合中转车流集结编组及时挂线，提高方案可实施性。     

卡西姆港燃煤应急电站卸煤码头港池水域平面布置优化

针对复杂水域条件下大型散货码头的水域平面布置,基于卡西姆燃煤应急电站码头工程项目,根据对周边已建工程、红树林以及水动力等主要影响因素的深入分析提出初步平面方案,并通过船舶操纵模拟试验对平面布置及相关尺度进行优化,合理确定本工程平面布置方案。结果表明,本工程的建设对周边影响较小,水域尺度能够满足船舶通航及靠离泊要求,水域平面布置合理。