船体外加电流阴极保护系统设计中问题的探讨

船体外加电流阴极保护系统国家标准(GB/T3108-1999)中关于设计电流密度的选取并由此计算船体的保护电流总量.由于船舶的结构布局等因素,往往使电极不能按理想的设计方案在船体E进行布置与安装,致使有些部位电流不足,导致部分船体得不到充分的保护.经实船实验证明,在船体设计安装外加电流阴极保护系统的同时,应在艉部等部位相应没计安装部分牺牲阳极以弥补辅助阳极电流之不足.     

中性点箝位型三电平单相逆变器中性点电位平衡控制方法

单相NPC逆变器可以利用现有耐压水平的开关器件实现输出谐波少、电磁干扰弱、共模电压低的高压大容量变频器,正在越来越多的应用于轨道交通等大功率驱动场合。针对单相NPC逆变器的中性点电位平衡控制问题,该文提出了通过在常规多电平载波调制的基础上利用开关冗余状态来调节电容充放电电流,控制中性点电位的控制方法。算法简单,容易实现,该方法的有效性得到了仿真结果的验证。     

Aggregating mobile object trajectories: cumulative time geographic density estimation for GPS data

We present new approaches that expand upon the time geographic density estimation (TGDE) framework previously employed to estimate potential path trees. In the past, TGDE metrics have identified possible locations an individual moving object may have passed between, given known origin and destination points. This paper utilizes a new form of TGDE to investigate taxicab GPS traces over a specified time horizon with position ‘gaps’. To this end, we propose a new extension to the TGDE framework, TGDE-C, which is used to determine the cumulative TGDE values for a group of GPS traces, at a given location. These metrics are applied to multiple taxis and allow for time of day analysis. Additionally, we combine these new extensions with existing TGDE metrics that allow us to determine how accessible individual or groups of vehicles are to urban opportunities.     

油库工业控制系统信息安全防护措施简析

本文结合某港油库的工业控制系统信息安全升级项目,介绍了该港根据《工业控制系统信息安全防护指南》、《工业控制系统信息安全行动计划(2018-2020)》以及国内外相关标准规范的要求,通过多角度评估,建立健全油库工业控制系统的安全保障体系,实现对其全方位的防护。     

多方式多类型交通分配模型(MMA)在收费型公路网中的应用研究

在对收费型公路运营模式进行研究的基础上,利用交通规划软件建立了基于广义费用的交通流量分配模型即多方式多类型交通分配模型,通过对模型参数的科学标定和网络的合理设置,得到各类车型在特定网络上的流量分配、路段饱和率以及通行费用,并对此模型的应用效果进行分析,最终为区域高速公路网规划、路段交通量预测提供依据。     

竖向荷载作用下桩基荷载传递计算方法

通过对己有各种单桩计算方法的研究总结,建立了单桩计算新理论。该理论与以往基于荷载传递法的单桩计算方法相比,做了如下改进:(1)桩侧与桩端采用广义荷载传递模型;(2)引入混凝土的Rusch模型以考虑高荷载水平作用下桩身混凝土的弹塑性性状;(3)耦合Mindlin解答以考虑桩侧摩阻力在桩端处产生的桩端位移。因此该单桩荷载-沉降关系计算方法在理论上更趋完善,使基于荷载传递法的多层地基中单桩荷载-沉降关系计算方法得到完善和统一。     

基于GRNN的GSM-R场强覆盖预测算法

在比较Hata模型修正方法和GRNN算法场强覆盖预测效果的基础上,仿真分析了训练集构成和平滑因子选择对GRNN算法预测效果的影响,给出了训练集构成和平滑因子选择的方法;提出了电波传播环境相似系数来表征GRNN模型在不同环境下的适用性。仿真结果表明,两种传播环境的相似系数越大,由一种环境下测试数据确定的GRNN在另一环境下的预测精度越高。     

In situ colonization of marine biofilms on UNS S32760 duplex stainless steel coupons in areas with different water qualities: Implications for corrosion potential behavior

In the presence of biofilms, stainless steels （SS） exhibits an increase in corrosion potential, called ennoblement. In the present study, the corrosion potential （Eco,） behavior of the duplex SS UNS S32760 was recorded simultaneously with the in situ marine biofilm formation in two areas at Arraial do Cabo, Southeastern Brazil. The biofilm at Forno Harbor （an anthropogenically disturbed area） was characterized by higher relative abundances of Bacteria at day 2, followed by diatoms （especially Navicula sp.） on day 10 and dinoflagellates on day 18, whereas no clear trend was recorded at Cabo Frio Island （an undisturbed area）. The ennoblement of Ecor values was site-dependent. In a complementary laboratory assay, biofilms were removed and the Eco values registered in sterile conditions for the subsequent 10 days and corroborated in situ results. Understanding biofilms and SS interactions has important implications for materials science and engineering decisions as well as helping to fill in imnortant gaps in this knowledge.     

油田埋地管道防腐层破损点检测及影响因素

简要阐述了埋地管道防腐层破损点的检测原理,并通过现场检测实例,总结出了影响防腐层破损点检测的几个主要因素,同时提供了解决方法,以提高防腐层破损点的检测准确率.     

Stress intensity factor measurement of cracks using piezoelectric element

A stress intensity factor (SIF) measurement method for cracks using a piezoelectric element and an electrostatic voltmeter is presented. In this method, an isotropic piezoelectric element is first attached near the tip of the crack. Then surface electrodes are attached to three different positions on the piezoelectric element. The electric potentials of the surface electrodes, which are proportional to the sum of the stress ( _x + _y ) on the structural member, are measured by an electrostatic voltmeter during load cycling. The mode I and mode II SIFs of the crack are estimated using the relationship between the SIF and ( _x + _y ). The applicability of the proposed method is examined through experiments and numerical analysis.