Riks弧长法在压杆非线性屈曲分析中的应用

为了得到单轴压缩杆件考虑几何非线性时的后屈曲特性,介绍Riks弧长法的基本原理,并以工字钢为例,说明Riks弧长法在压杆非线性屈曲分析中的应用.结果表明,考虑初始缺陷后,压杆的屈曲强度大大减小,且屈曲强度对缺陷因子极为敏感.该研究可为单轴压缩杆件的非线性屈曲分析提供参考.     

圆截面钢管砼构件极限弯矩分析

分析了圆截面钢管砼构件在弯曲极限状态下,钢管和砼相互作用而产生的两种套箍作用效果;推导了理想塑性状态下的中和轴位置和极限弯矩的计算方法.     

交织区长度对车道变换频率的影响

交织区长度是影响交织区运行特性的重要参数,影响着交织车辆进行车道变换的紊动程度。找出了车道变换频率与其相应产生的车道变换长度的一一对应关系,定义了车道变换长度随机变量,通过分析给定交织区车道变换长度的统计分布来反映交织操作车道变换的频度。在其他因素不变的条件下,运用动力学理论、概率论等方法定量分析了交织区长度对车道变换产生的影响。     

美标高桩码头抗震计算位移法的对比

从原理和适用性的角度对美标高桩码头抗震计算方法进行对比,着重研究了位移法及其中的替代结构法。对替代结构法中推覆曲线的双折线化方式、阻尼比计算、反应谱衰减等影响因素进行分析。通过推覆分析和替代结构法计算变形能力和地震位移、复核码头抗震性能。结合实际案例,采用反应谱法和替代结构法对某高桩码头结构进行抗震分析。结果表明反应谱法趋于保守,不能反映塑性后的荷载衰减,相比而言替代结构法更为准确。而对于替代结构法,不同的等效阻尼比会较大程度影响地震位移结果。     

装配式码头灌浆连接节点压弯性能试验研究

对3组装配式码头灌浆连接节点试件进行压弯试验,研究不同灌浆长度和灌浆厚度下灌浆节点的压弯承载力、延性和破坏模式。结果表明,灌浆节点试件具有较好的延性和较高的承载力,灌浆节点受压弯荷载的破坏模式为钢管的压屈破坏;压弯构件的极限承载力随着灌浆长度的增大而增大;灌浆厚度的变化对构件的承载力影响不大,但灌浆厚度增大可以提高灌浆体底部的抗裂能力,建议实际应用时适当增大灌浆厚度。     

A stochastic model of traffic flow: Theoretical foundations

In a variety of applications of traffic flow, including traffic simulation, real-time estimation and prediction, one requires a probabilistic model of traffic flow. The usual approach to constructing such models involves the addition of random noise terms to deterministic equations, which could lead to negative traffic densities and mean dynamics that are inconsistent with the original deterministic dynamics. This paper offers a new stochastic model of traffic flow that addresses these issues. The source of randomness in the proposed model is the uncertainty inherent in driver gap choice, which is represented by random state dependent vehicle time headways. A wide range of time headway distributions is allowed. From the random time headways, counting processes are defined, which represent cumulative flows across cell boundaries in a discrete space and continuous time conservation framework. We show that our construction implicitly ensures non-negativity of traffic densities and that the fluid limit of the stochastic model is consistent with cell transmission model (CTM) based deterministic dynamics.     

输气管道置换优化研究

置换是输气管道投产试运过程中的重要工艺环节,是复杂的扩散、对流过程。文中介绍了输气管道投产前用氮气置换空气的几种方法,阐述了它们的工作原理与实施步骤,对比分析了它们的优缺点,优选了置换方式,并采用Fluent流体模拟软件建立了输气管道氮气置换数学模型,进行了三维稳态和非稳态数值计算,研究了置换过程中混气段长度随管径、管长、流速变化规律,将理论推导、数值计算和现场数据进行了对比,验证了理论结果的正确性,为现场施工提供了科学依据。     

The effectiveness of a European speed limit versus an international bunker-levy to reduce CO2 emissions from container shipping

In the fight to reduce CO₂ emissions from international shipping, a bunker-levy is currently under consideration at the International Maritime Organization (IMO). Faced with the inability of the IMO to reach an agreement in the short term, the European Commission is now contemplating a unilateral measure of a speed limit for all ships entering European Union (EU) ports. This paper argues that this measure is counterproductive for two reasons. Firstly, because it may ultimately generate more emissions and incur a cost per ton of CO₂ which is more than society is willing to pay. Secondly, because it is sub-optimal compared to results obtained if an international bunker-levy was to be implemented. These elements are illustrated using two direct transatlantic services operated in 2010.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

战时桥梁损伤等级的初步评定

战时桥梁保障任务繁重,对遭袭损伤桥梁的保障步骤是:评定损伤等级、制定抢修或抢建方案、实施方案和验收通行,而对于如何"评定桥梁损伤等级"这一环节,并无评定规范或标准,使战时桥梁保障方案的选取与制定无法可依,无章可循,桥梁保障也就无法适应现代高技术条件下战争的需要。根据现有工程的验收评定方法并结合战争中桥梁快速保障的特点,初步进行战时桥梁损伤等级的划分,拟订了评定方法和评定过程,为实现评定的自动化打下了初步基础。