水泥土室内制样方法与配合比试验

水泥土室内配合比试验是深层水泥搅拌法工程应用中一项重要的前期工作。基于大量室内试验,总结提出干土制样法与湿土制样法两种不同的水泥土制样方法及其试验流程,并对其优缺点与适用性进行比较,得出以下结论:1)当以试验土样目标含水率为变量,或试验土样初始含水率大于目标含水率时,应采用干土制样法; 2)当研究在土样初始含水率下其他因素对水泥土强度的影响时,采用湿土制样法更为合适、高效。以香港冲积层黏土为研究对象,采用干土制样法分析土样含水率对水泥土无侧限抗压强度的影响。试验结果表明,在含水率40%～80%范围内,不同龄期的水泥土强度均随含水率的增加而减小,且在高含水率(大于70%)下水泥土强度随龄期增长不明显。     

LR2型油船系泊与拖带设计研究

以某LR2型油船实船系泊、拖带设备选型及技术方案确定过程为依据,结合设计过程中针对该船特殊甲板结构区域系泊设备布置及为完全满足新规范要求改进舾装设备所采取的优化措施,对此类油船实船设计如何更好地满足近年来新生效的系泊、拖带相关规范和规则要求进行研究.对LR2型油船系泊、拖带设计相关的重点内容、关键技术及为获得最优设计方...     

中国航运界关于限制CFCs对策研究

正当近期内，氯氟烃物质（ＣＦＣｓ和ＨＣＦＣｓ）面临着被限制使用或被替代的严峻形势，本文分析了禁用氯氟烃的实质，及其对我国航运界的影响，特别对于远洋运输业的影响。并通过对国内外ＣＦＣｓ替代技术的进展的分析研究，提出我国航运界关于限制ＣＦＣｓ的对策。     

Ⅱ级粉煤灰对海工高性能混凝土抗氯离子渗透性能的影响

粉煤灰具有改善混凝土性能的作用,并在工程中获得大量应用。针对工程中常用Ⅱ级粉煤灰配制海工高性能混凝土的情况,采用2种不同电厂的Ⅱ级粉煤灰,研究了它们所配制的高性能混凝土的抗压强度和抗氯离子侵蚀性能。研究结果表明,Ⅱ级粉煤灰可以显著提高混凝土的抗氯离子侵蚀性能,Ⅱ级粉煤灰海工高性能混凝土的抗氯离子侵蚀性能和抗压强度与其玻璃体含量、化学组成以及钙硅摩尔比密切相关。     

Estimates of vertical mixing during a Lagrangian experiment off the Galician coast

An adjoint 1-D model was used to determine vertical diffusivity coefficients from temperature profiles collected within a filament escaping from the Galician coast following an upwelling event. The optimisation scheme ended with relatively high diffusivity values within the thermocline (9×10⁻⁵ m² s⁻¹). Such high values are relevant for biogeochemical exchanges between surface and deep waters in stratified areas.The optimised values were several orders of magnitude higher than the bulk of diffusivity measurements recorded with a free-falling device; however, the optimisation solution was consistent with the arithmetic mean of the measurements in the thermocline (7.7×10⁻⁵ m² s⁻¹), giving more weight to the few largest values. Below the thermocline, the data assimilation method failed because of the three-dimensional nature of the advective field of the upwelling system. Ignoring this advective forcing in the model led to estimates that were two orders of magnitude too high.The results suggest that turbulent mixing is a random process where a few intense events determine the average mixing that drives the long-term evolution of the water column structure. This statistical property is very important when one wants to use instantaneous diffusivity measurements for modelling purposes.     

港口工程中贫混凝土基层结构设计及配合比研究

介绍港口工程中贫混凝土基层结构的设计和计算方法;从施工角度对贫混凝土材料的配合比进行了试验和研究,旨在为该材料的合理配制提供有益的借鉴和参考。     

高桩码头梁顶裂缝原因分析及控制技术

混凝土裂缝是困扰码头外观质量的“老大难”问题,而梁顶部位面层混凝土裂缝(简称梁顶裂缝)作为高桩梁板式码头中常见的质量通病,一直是工程技术人员的攻关课题。在宁波港北仑四期集装箱码头工程建设过程中,通过分析梁顶裂缝产生的原因,采取降低混凝土强度、梁顶部位割双缝等措施基本克服了梁顶裂缝,取得了较好的效果,也为同类工程提供了借鉴。     

A dense water outflow from the Ross Sea, Antarctica: Mixing and the contribution of tides

We use hydrographic, current, and microstructure measurements, and tide-forced ocean models, to estimate benthic and interfacial mixing impacting the evolution of a bottom-trapped outflow of dense shelf water from the Drygalski Trough in the northwestern Ross Sea. During summer 2003 an energetic outflow was observed from the outer shelf ( 500 m isobath) to the  1600 m isobath on the continental slope. Outflow thickness was as great as  200 m, and mean speeds were  0.6 m s^− 1 relative to background currents exceeding  1 m s^− 1 that were primarily tidal in origin. No outflow was detected on the slope in winter 2004, although a thin layer of dense shelf water was present on the outer shelf. When the outflow was well-developed, the estimated benthic stress was of order one Pascal and the bulk Froude number over the upper slope exceeded one. Diapycnal scalar diffusivity (K_z) values in the transition region at the top of the outflow, estimated from Thorpe-scale analysis of potential density and measurements of microscale temperature gradient from sensors attached to the CTD rosette, were of order 10^− 3−10^− 2 m² s^− 1. For two cases where the upper outflow boundary was particularly sharply defined, entrainment rate w_e was estimated from K_z and bulk outflow parameters to be  10^− 3 m s^− 1 ( 100 m day^− 1). A tide-forced, three-dimensional primitive equation ocean model with Mellor-Yamada level 2.5 turbulence closure scheme for diapycnal mixing yields results consistent with a significant tidal role in mixing associated with benthic stress and shear within the stratified ocean interior.     

混流泵内流场的数值模拟

利用FLUENT软件,采用标准k-ε双方程紊流模型和SIMPLE算法对混流泵内部的三维紊流流动进行数值模拟.通过对其内部流动速度、压力分布的分析,揭示了其内部流动的主要特征,对其性能及改进提供相关信息.     

A trace metal (Pb, Cd, Zn, Cu) balance for surface waters in the eastern Gotland Basin, Baltic Sea

Trace metal inventories and transboundary fluxes were estimated for the surface waters of the eastern Gotland Basin, and a mass balance for this water body was derived.The study area was delineated by a box which bordered vertically by the sea surface and the halocline and horizontally by the coast of Gotland and the coast of Latvia/Lithuania. For the calculation of the trace metal inventories in the box, a high-resolution sampling was carried out during different seasons. Additional sediment trap studies were performed to calculate the vertical particulate trace metal fluxes through the halocline.The following transboundary fluxes have been estimated: (a) atmospheric input of trace metals; (b) lateral transport from adjacent bodies of surface water; (c) diapycnal fluxes of dissolved trace metals at the halocline; (d) sinking of trace metals, associated with particles, through the halocline, (e) vertical advection through the halocline.The lateral transport into and out of the surface box is important for the metals (Cd, Cu, Zn) with “nutrient-like” behaviour. For particle reactive elements like lead, vertical sedimentation and lateral transport out of the box as much as atmospheric input and lateral input into the box are in the same order of magnitude. Turbulent diapycnal mixing plays a minor role compared to the advective fluxes.The estimated range for the residence times for the region under investigation are  0.5–1.3 years for Pb;  2–11 years for Zn,  7–36 years for Cd and 42–89 years for Cu. This demonstrates that the system reacts very fast for particle reactive elements like Pb, while for copper sedimentation processes are not the preferential sink and can be neglected.