交互劳务代数分配法实际操作研究

本文研究辅助生产部门交互劳务代数分配法的实际操作问题,解决了该方法的辅助生产费用分配表的设计、联立方程组的建立和帐务处理等问题。笔者提出的实际应用程序可操作性强。     

弹性接触问题的位移-力法有限元解法研究

本文根据接触状态下的有限元基本方程,通过对定解条件、约束条件的分析应用,得出了仅与接触点有关的定解方程。 运用所编制的电算程序对某柴油机副连杆销及孔在最大载荷下的失圆变形进行了计算。通过采用空心及实心销两种简化模型计算得出了实际副连杆销的失圆变形范围。     

Global cutting-path optimization considering the minimum heat effect with microgenetic algorithms

This article considers microgenetic algorithms (GAs), which explore in a small population with a few genetic operators, for cutting-path optimization problems. The major difference between GAs and simple genetic algorithms (SGAs) is how to make a reproductive plan for an improved searching technique because of population choice. It is shown that GAs implementation reaches the near-optimal region much earlier than the SGAs approach, and the GAs give a better solution than simulated annealing (SA). The main objective was to determine what temperature distribution can be obtained from the solution of a travelling distributed heat source. The solution of the travelling heat source on nested raw plate provides information about the vertices of each nested part of the raw plate. From the fact that the initial temperature at a piercing point strongly depends on the heat flow which stems from the previous cutting contour, the temperature of all piercing points must be lower than the critical temperature after each cutting of the components of a part. The critical temperature is identified as the mechanical melting temperature of steels. A heuristic back-tracking method is introduced to find the near-optimum cutting path considering the minimum heat effect on deformation. The heuristic back-tracking method is incorporated with the GAs.     

Transient responses of a VLFS during landing and take-off of an airplane

The transient elastic deformation of a pontoon-type very large floating structure (VLFS) caused by the landing and take-off of an airplane is computed by the time-domain mode-expansion method. The memory effects in hydrodynamic forces are taken into account, and great care is paid to numerical accuracy in evaluating all the coefficients appearing in the simultaneous differential equations for the elastic motion of a VLFS. The time-histories of the imparted force and the position and velocity of an airplane during landing and take-off are modeled with data from a Boeing 747-400 jumbo jet. Simulation results are shown of 3-D structural waves on a VLFS and the associated unsteady drag force on an airplane, which is of engineering importance, particularly during take-off. The results for landing show that the airplane moves faster than the structural waves generated in the early stage, and the waves overtake the airplane as its speed decreases to zero. The results for take-off are essentially the same as those for landing, except that the structural waves develop slowly in the early stage, and no obstacle exists on the runway after the take-off of airplane. The additional drag force on an airplane due to the elastic responses of the runway considered in this work was found to be small in magnitude.     

Digital exchange of design models between marine equipment libraries using hybrid neutral formats

The selection of marine equipment is a time-consuming process for a ship outfitting designer. The inefficiency originates from the paper-based exchange of design information between shipyards and equipment manufacturers. We propose a method to exchange equipment models for electronic commerce. Shipyard practices were investigated to find out how the outfitting CAD library is being used. We also surveyed international standards for the exchange of digital equipment models, and analyzed the macroparametric methodology. We propose a hybrid method to represent the geometric information using STEP AP203 or the macroparametric method. The nongeometric information is defined according to the Parts Library (PLIB) standard. We implement a pilot system and test it with a ship design data set. The equipment model proposed can be used in the design process with heterogeneous shipbuilding CAD systems. The equipment model can improve the design and purchase process in shipyards.     

Non-commuters: the people who walk to work or work at home

The paper focuses on the socioeconomic characteristics of workers at home and those who walk to work and these are compared with commuters (those who travel to work by motorized transportation). Understanding of such characteristics of these people is useful for purposes of designing policies that encourage these forms of "travel" to work, if it is believed desirable for planning or environmental purposes. For example, subsidizing public transportation may also have an impact on the proclivity to work at home or walk to work. Using a large census data set for Israel, separate subsamples are analyzed for heads of household and for their spouses. Metropolitan areas as well as peripheral urbanized areas are analyzed separately. Logit analysis is used to identify those variables that affect the likelihood of different groups of people to walk to work or to work at home.It is shown that walkers to work tend to be lower-income, less-educated people with lower asset ownership rates. Females are overrepresented amongst them, while "high-status" professionals are underrepresented. Workers at home appear to be a more complex group. They tend to have higher levels of education and wealth than commuters, but earn less on average. They include proportionately more females. The likelihood of working at home increases with home size and with ownership of some durable goods. The workers at home may in fact be comprised of two or more differing groups with contrasting characteristics, one higher-income and higher-educated, the other with lower socio-economic indicators. Because they may be a heterogeneous group, development of planning policies to encourage non-vehicle commuting may require different policy tools for the different subgroups.     

自主水下航行器制导系统的设计

简要介绍了某小型远程自主水下航行器制导系统的设计要求和软硬件实现方法,该制导系统已成功应用于211工程建设的自主水下航行器上。     

砂卵石地层台阶法施工隧道围岩-支护结构应力应变特性三维离散元分析

为了解砂卵石地层隧道围岩和支护结构的应力应变特性，以青海循隆高速公伯峡隧道为依托，借助PFC3D离散元软件对公伯峡隧道穿越砂卵石地层进行三维模拟，重点研究以密排短管棚预支护为根本前提，以三台阶预留核心土为施工方法的砂卵石地层围岩和支护结构的应力应变特性，并与现场实测进行对比分析。研究结果表明： 隧道台阶开挖时，围岩应力集中范围逐渐从拱顶过渡到拱腰，直到拱脚，对应的塑性区范围不断扩大，且密排短管棚对塑性区的发展有一定的“遮拦效应”； 围岩横纵向变形规律一致，主要是向隧道临空面产生收敛变形，且密排短管棚形成的梁拱效应限制了掌子面前方位移发展； 2种方法得到的初期支护变形规律一致，均呈阶段性变化，拱顶下沉累计值大于周边收敛累计值，且两者的最终变形量均满足规范限值要求。     

基于神经网络的无人无缆水下机器人运动建模与控制技术研究

对自主型水下机器人（ＡＵＶ）神经网络运动模型的结构进行了理论分析和探讨,提出了非完全回归型神经网络、增加积分层的输出层结构及相应的分步式学习方法。对ＡＵＶ运动过程中目标运动路径和目标运动速度的同时跟踪控制进行了系统研究。提出了由主控网络和伴随网络构成的神经网络控制器结构,给出了通过计算机模拟来生成教师样本的方法,提出了预测控制的思想。计算机仿真及水下机器人“Ｔｗｉｎ－Ｂｕｒｇｅｒ”的水池实验结果验证了本文所提出的建模方法和跟踪控制方法的有效性和可行性。     

The impacts of changing flight demands and throughput performance on airport delays through the Great Recession

Several significant events between 2007 and 2009 impacted flight demands and the abilities of the three major New York area airports to handle demand. This paper assesses the results of applying a probabilistic simulation method – which isolates the individual contributions of changes in flight demand and changes in airport throughput performance to changes in flight delays – to diagnose how these different events may have caused operational changes at these airports, and in turn, how the results may be used to inform policies for appropriate countermeasures. The analysis revealed two key observations. Firstly, certain patterns in throughput performance shifts caused the most significant delays, and were more likely to have been caused by controller staffing issues rather than caps. Secondly, relatively constant average delays from one year to the next may result from significant demand drops accompanied by large throughput performance degradations at an airport. This suggests that not only operational limitations on capacity encourage airlines to reduce schedules, but that changed demands can also impact throughput performance. Overall, the analysis indicates that caps may not have provided their fully intended delay benefits. Although they successfully reduced overall flight demands at LGA and JFK, they also directly limited throughput performance at critical times, in turn limiting delay benefits. In addition, demands at the busiest times of the day appear to be relatively inelastic to these operational limitations, insofar as demand profiles at EWR and JFK remained “peaky” in 2008 and 2009. Also, the recession was largely responsible for reducing demands at the airports in 2009, but the delay benefits of this were dampened by a corresponding throughput performance degradation. Based on the above observations, a more direct demand management policy combined with policies that focus on maintaining high staffing capabilities at critical times of the day may be considered, to reduce the likelihood of major queue formation on days that do experience sustained demands. The results also suggest that a more flexible caps system, particularly during times of heavy queues, could be explored. Although airport practitioners have keen understandings of how their airports operate, without the support of quantitative analysis tools, it can be more difficult to argue the need for appropriate countermeasures. An analysis such as the one presented here can provide the detailed quantitative substantiation required to build cases for these targeted policy directives and infrastructure investments.