Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Costs of air pollutants from shipping: a meta-regression analysis

ABSTRACT

This study estimated the external cost of air pollution from shipping by means of a meta-regression analysis, which has not been made before. Three pollutants, which were included in most of the primary studies, were considered: nitrogen oxides (NO_x), sulphur dioxides (SO₂) and particulate matters with a diameter of max 2.5 micrometres (PM_2.5). All primary studies included damages of health and a majority added impacts on agriculture and estimated the cost of air pollutants by transferring cost estimates from studies on costs of air emissions from transports in Europe. Different regression models and estimators were used and robust results were found of statistically significant emission elasticities of below one, i.e. total external costs increase by less than 1% when emissions increase by 1%. There was a small variation between the pollutants, with the highest elasticity for PM_2.5 and lowest for NO_x. Calculations of the marginal external cost of the pollutants showed the same pattern, with this cost being approximately six times higher for PM_2.5 than for the other pollutants. Common to all pollutants was that the marginal external cost decreases when emission increases. Another robust result was a significant increase in the cost of studies published in journals compared with other publication outlets. These findings point out some caution when transferring constant external unit cost of air pollutant from shipping, which is much applied in the literature, and the cost functions estimated in this study could thus provide a complementary transfer mechanism.     

某车型座椅骨架动态安全性与模态分析

为判断汽车座椅骨架的结构合理性,文章利用ANSA建立了某乘用车座椅骨架总成及假头型有限元模型,对该座椅骨架进行了模态分析与基于显式动力学有限元的头枕吸能性仿真试验,得到前四阶固有频率和振型、头枕前碰仿真分析加速度时间历程图。结果表明,该座椅骨架自由模态频率避开了人体最敏感的共振频率范围,整个碰撞过程假头型减速度超过80 g的连续作用时间未超过3 ms。     

开口加劲肋正交异性钢桥面铺装力学分析

文章以开口加劲肋正交异性钢桥面铺装体系作为研究对象,建立了包括桥面板和铺装的整体三维有限元分析模型,研究了荷载作用下铺装层的力学特性。分析表明,横向拉应力是开口加劲肋正交异性钢桥面铺装设计的一个重要控制指标;开口加劲肋正交异性钢桥面铺装层间剪应力较大,在铺装结构设计时应注意选择具有较强抗剪强度的粘结材料;开口加劲肋正交异性钢桥面铺装对车辆荷载的应力应变响应具有很强的局部效应。     

成品油管道水击保护

长距离成品油管道在密闭输送过程中,出现非正常停泵、误关阀门及混油界面经过泵等均会引起水击现象发生。水击波沿管道传播,极易导致管道局部超压而造成管道破裂、损坏设备等,故水击保护成为成品油管道密闭输送关键性的工艺技术之一。金嘉湖成品油管道在全线水击保护控制方面采用了进出站压力调节系统、分输站分油流量调节系统、出站压力超高泄放系统、进站低压泄放保护系统、进出站压力超限停泵联锁保护系统来保证管道事故工况时的安全。     

Analyzing the theoretical capacity of railway networks with a radial-backbone topology

In this work we propose a mechanism to optimize the capacity of the main corridor within a railway network with a radial-backbone or X-tree structure. The radial-backbone (or X-tree) structure is composed of two types of lines: the primary lines that travel exclusively on the common backbone (main corridor) and radial lines which, starting from the common backbone, branch out to individual locations. We define possible line configurations as binary strings and propose operators on them for their analysis, yielding an effective algorithm for generating an optimal design and train frequencies. We test our algorithm on real data for the high speed line Madrid–Seville. A frequency plan consistent with the optimal capacity is then proposed in order to eliminate the number of transfers between lines as well as to minimize the network fleet size, determining the minimum number of vehicles needed to serve all travel demand at maximum occupancy.     

Marginal railway track renewal costs: A survival data approach

In this paper, renewal costs for railway tracks are investigated using survival analysis. The purpose is to derive the effect from increased traffic volumes on rail renewal cycle lengths and to calculate associated marginal costs. A flow sample of censored data containing almost 1300 observations on the Swedish main railway network is used. We specify Weibull regression models, and estimate deterioration elasticities for total tonnage as well as for passenger and freight tonnages separately. Marginal costs are calculated as a change in present values of renewal costs from premature renewal following increased traffic volumes. The marginal cost for total tonnage is estimated to approximately SEK 0.002 per gross ton kilometre.     

Exchange rate and transport cost sensitivities of bilateral freight flows between the US and China

This paper explores the long-run impacts of gross domestic product, exchange rate, and transport costs on bilateral air and ocean freight flows between the US and China. The study employs a cointegration framework by using export and import data over the period of 2003:Q1-2014:Q2. Results show that gross domestic product is the key determinant of bilateral freight flows, indicating that real income of a trading partner is a driving force of the bilateral freight flows between the US and China. In examining the sensitivities of the bilateral trade flows, air freight flows are found to be more responsive to a real income change than ocean freight flows. The bilateral exchange rate is a significant factor affecting the freight flows from China to the US, suggesting that a US dollar appreciation against the Chinese yuan increases the inflows of Chinese commodities to the US. The impacts of the bilateral exchange rate and transport cost are found to vary at industry and commodity levels. These findings support the importance of employing disaggregate data in the bilateral freight flow analysis.     

An integrated assessment of alternative land-based passenger transport policies: A case study in Tenerife

Over recent decades, there have been numerous cases of land-based transport policies that have lacked clear and coherent strategies. This has not only hampered the resolution of issues like road congestion, but has also created new ones (e.g. strong social opposition to new train infrastructures). The absence of such strategies highlights the need for long-term transport policies with a wider vision of the issues, since land-based transport cannot be considered from just a technical perspective.The main objective of this article is to implement a participatory integrated approach to facilitate the understanding of land-based passenger transport governance issues on Tenerife, in the Canary Islands. Relevant policy issues and alternatives are identified by the stakeholders involved. The inclusion of stakeholders in the assessment process is crucial to frame transport governance issues appropriately and to define and assess plausible policy alternatives. This assessment process even included a final step of validation of the results by stakeholders to foster discussion among them about transport issues and policy alternatives.Finally, due to the obstructive role played by some stakeholders in influencing past transport policies, an analysis of possible coalitions among stakeholders is also discussed.     

The role of transportation sectors in the Korean national economy: An input-output analysis

The transportation industry has been playing an important role in the economic development of Korea and, thus, has become a critical factor in sustaining the well-being of the Korean people. This paper attempts to analyze the economic impacts of four transportation modes using input-output (I-O) analysis, with specific application to Korea. To this end, we apply the I-O models to the Korean I-O tables generated by the Bank of Korea, paying particular attention to the four transportation sectors in Korea (rail, road, water, and air transportations), considering them as exogenous, and then determining their impacts. Specifically, the production-inducing effects, supply shortage effects, sectoral price effects, forward linkage effects, and backward linkage effects of the four transportation modes are quantitatively derived over the period 2000–2010. For example, the production-inducing effect of a KRW 1.0 production or investment in transportation is larger in the petroleum and transportation equipment sectors than in other sectors. Furthermore, the rail and road transportation sectors have greater supply shortage effects than the other transportation sectors. Finally, the potential uses of the results of this analysis are presented from the perspective of policy instruments, and policy implications are discussed.