铁路小半径曲线刚构-连续梁桥设计研究

为研究小半径曲线刚构-连续梁桥的受力特点,以某(36+60+36)m铁路刚构-连续梁桥为背景进行分析。采用BSAS、MIDAS、ANSYS建立有限元模型,针对该桥小半径、施工复杂等特点,从弯扭耦合效应、刚度、变形、稳定性等方面进行详细分析,结果表明:该桥具有足够的强度、刚度和稳定性。     

京唐城际铁路速度目标值选择

速度目标值是城际铁路最主要技术标准,不同的速度目标值决定了基础设施、设备及各项配套设施的选择。从京唐城际铁路功能定位出发,通过对客流特点、功能定位、时间目标值需求、经济技术比选等多方面因素的分析,综合得出京唐城际铁路速度目标值推荐采用350 km/h的方案。     

台风的预防预控

防抗台风是海事部门的重点工作之一，只有采取有效的针对性措施才能最大限度地减小损失。     

天津富民桥锚碇及箱梁过渡段构造施工

天津富民桥主桥为单塔空间索面自锚式悬索桥结构,介绍该桥主跨自锚式锚碇、边跨重力式锚碇及钢-混凝土过渡段的施工特点以及根据现场实际情况采取的有效措施.     

The effect of the competition between cars and trucks on the evolution of the motorway transport system

Motorways, which were devised at the beginning of their history as dedicated roads intended to be traveled by cars only, are at present also traveled by considerable flows of trucks. This fact has deeply changed the motorway transport system with respect to its original conception, owing to the interactions between two categories of vehicles whose characteristics are very different. These interactions greatly increase the transport cost perceived by car drivers with respect to truck drivers. This paper studies the consequences of this cost asymmetry on the evolution of the transport system when the geometric characteristics of a motorway remain unchanged in time, while transport demand increases. By using a theoretical model of competition between cars and trucks, it is shown that, if both the geometric characteristics of a motorway and the increase rate of the activities that feed the transport demand remain unchanged over time, the competition between cars and trucks, as well as the fact that in general passengers have better transport alternatives than freight, make the increase rate of truck traffic greater than that of cars, causing a progressive increase in the proportion of trucks in the time periods in which a motorway is traveled by both the vehicle categories. Since truck traffic on motorways, at least in Europe, is very scarce on weekends and in holiday periods, in which motorways are traveled almost only by cars, these results seem to indicate a tendency to the specialization of motorways, which are likely to be used in the future mostly by only one category of vehicles in different periods of time.     

BIM辅助铁路隧道施工方案可视化设计应用

基于BIM技术的3D可视化设计环境和4D虚拟仿真环境,研究BIM辅助施工方案可视化设计和虚拟推演的方法和流程,以及施工方案的环境、结构和施工设施等三维数字模型设计原则。针对铁路隧道仰拱与仰拱填充施工特点,利用BIM辅助施工方案可视化设计,建立施工方案的三维数字模型,优化设计仰拱与仰拱填充快速施工装备与工艺,模拟方案的施工过程。结果表明,BIM辅助铁路隧道施工方案优化设计,取得了很好的效果。     

铁路客专信号产品灌封技术的研究

比较各种灌封材料的优缺点，研究在铁路客专信号产品生产中应用硅树脂凝胶灌封的关键工艺，包括PCBA表面清洁、温度控制、配方管理和控制、抽真空、灌封有效期管理和固化过程管理等，特别提出灌封有效期管理的新观点，并进行实践和总结。     

沥青混凝土热铺层厚度测量仪设计

针对在公路养护与沥青混凝土路面摊铺过程中,沥青混凝土的厚度控制对施工成本、路面平整度、路面质量及验收结果的影响,设计了一种能够精确测量沥青混凝土热铺层厚度的实用新型厚度测量仪,克服了目前公路工程施工中沥青混凝土热铺层厚度测量技术中的缺点与不足     

LabVIEW的外部代码接口技术应用

在介绍虚拟仪器及其开发平台LabVIEW特点的基础上,研究其调用动态链接库和代码接口节点的方法。通过具体实例,证明了外部代码接口技术是增强LabVIEW整体功能的有效途径。     

苏州中心地下空间超长结构温度应力分析

苏州中心建筑平面尺寸巨大,因超长产生的温度应力对结构的影响较为显著。通过分析地下结构从施工到投入正常使用全过程中可能受到的温度荷栽的类型,利用线性分布法计算作用在建筑物上温度荷栽.总结出确定温度作用的计算工况。并以苏州中心地下空间结构为例,介绍了温度应力的计算方法。实际计算表明,降温荷载在框架梁和楼板中产生较大拉应力.楼板开洞部位拉应力集中,温度作用在框架柱中产生剪力和弯矩,在工程设计时必须充分考虑。