拉日铁路年楚河特大桥V形刚构加拱组合结构设计

拉日铁路年楚河特大桥主桥采用(60+148+60)m V形刚构加钢管混凝土拱组合结构,桥型结构新颖,详细介绍该桥型的设计特点,对主桥进行静力及动力分析,对承载能力、抗震、车桥动力响应等方面进行了详细计算。该桥将V形连续刚构和钢管混凝土拱桥2种体系有机结合在一起,使V构与拱在受力方面的优点得以充分发挥,既能保证安全舒适的行车,又满足了景观造型要求。     

����GA¬¬-BP�ĸ��ٹ�·����ѵ�ģ������������о�

鉴于模糊神经网络具有良好的非线性特性、学习能力、自适应能力和抗干扰能力,本文将模糊神经网络技术引入到高速公路入口匝道控制中。提出一种基于GA和BP算法的模糊神经网络控制器,并对控制器进行了详细设计。设计过程主要分为三部分：输入输出参数的选择、模糊神经网络的结构设计以及基于GA-BP的学习算法设计。最后,使用MATLAB软件对其进行了仿真。仿真结果表明,本文提出的方法是有效的,较之基于BP的模糊神经网络控制和ALINEA控制,能更好地稳定主线交通流密度。     

ISG hybrid powertrain: a rule-based driver model incorporating look-ahead information

According to European regulations, if the amount of regenerative braking is determined by the travel of the brake pedal, more stringent standards must be applied, otherwise it may adversely affect the existing vehicle safety system. The use of engine or vehicle speed to derive regenerative braking is one way to avoid strict design standards, but this introduces discontinuity in powertrain torque when the driver releases the acceleration pedal or applies the brake pedal. This is shown to cause oscillations in the pedal input and powertrain torque when a conventional driver model is adopted. Look-ahead information, together with other predicted vehicle states, are adopted to control the vehicle speed, in particular, during deceleration, and to improve the driver model so that oscillations can be avoided. The improved driver model makes analysis and validation of the control strategy for an integrated starter generator (ISG) hybrid powertrain possible.     

Multivariable speed synchronisation for a parallel hybrid electric vehicle drivetrain

In this article, a new drivetrain configuration of a parallel hybrid electric vehicle is considered and a novel model-based control design strategy is given. In particular, the control design covers the speed synchronisation task during a restart of the internal combustion engine. The proposed multivariable synchronisation strategy is based on feedforward and decoupled feedback controllers. The performance and the robustness properties of the closed-loop system are illustrated by nonlinear simulation results.     

Simulation study on the operating characteristics of a hybrid hydraulic passenger car with a power split transmission

In this paper, a hybrid hydraulic passenger car (HHPC) coupled with a power split continuously variable transmission (P-CVT) is proposed. This P-CVT is capable of splitting the power from the internal combustion engine into mechanical and hydraulic power flows. By adjusting the ratio of the mechanical power to hydraulic power, the P-CVT enables the transmission ratio to be changed continuously. Meanwhile, the P-CVT system can capture the braking energy and store it in the hydraulic accumulator for the next assistant driving. In order to quantitatively investigate the effect of applying P-CVT on improving the fuel economy and operating performance for the HHPC, a numerical simulation is conducted under typical city driving conditions. The simulation results demonstrate that, the P-CVT permits the engine to be run under a more efficient operating range. The total fuel consumption of the HHPC is reduced by 16.4% under the test conditions, compared with that of the original car.     

结构可靠性优化设计的遗传算法

本文针对结构可靠性优化设计问题的特点与计算上的难点，提出遗传算法，文中比较详细地比较了遗传算法的理论基础，遗传算子及工作过程，并对参数选择及其对收敛的影响作了探讨，最后以两个可靠性优化问题作了算例，验证了遗传算法解决此类问题的有效性。     

船载直升机着船预报系统及评估方法

介绍船载直升机着船预报系统的硬件组成和几种常用的预报方法,提出一种基于微成分分析的新的预报方法。最后,对综合考虑横摇和纵摇2种运动的着船预报效果进行评估。     

高速列车横向平稳性主动控制规律研究

提高列车的运行平稳性是机车车辆动力学的研究热点。本文以列车的横向运行平稳性为研究对象,采用面向对象的建模方法,建立了由3节车辆组成的车组横向动力学模型,并将作动器放置在车端构成车端主动悬挂系统。采用轨道不平顺高速谱作为输入,考虑轮轴间时延,运用遗传算法对控制器进行优化设计。研究表明,采用车端主动悬挂系统,运用本文算法,车组的横向运行平稳性得到了提高;当在端部车辆的端部二系悬挂中再并行设置作动器,并采用改进的天棚阻尼器算法后,端部车体的振动得到了有效抑制,整个列车横向运行平稳性进一步得到了改善。     

基于遗传算法的集装箱单箱三维装载优化问题

研究应用改进遗传算法优化铁路集装箱单箱三维装箱问题,达到充分利用集装箱装载质量或装载容积的目的。改进遗传算法中考虑货物放置方向、装载容积、装载质量及装载重心等约束条件,并结合方向及顺序约束采用巧妙的个体编码方法,结合装载容积、装载质量及重心约束构造合理的适应值函数。以16件货物装入20英尺箱为实例,应用改进遗传算法进行计算,计算结果为集装箱装载容积利用率为63 18%,并且可以缩短计算时间一半以上。     

探地雷达数值模拟及其在隧道检测中的应用

利用时域有限差分(FDTD)方法,对隧道工程检测中常见检测目标进行数值模拟,分析脱空、单层钢筋、双层钢筋等目标体的探地雷达反射信号图像特征,并对隧道检测中的雷达信号图像采用遗传算法进行反演,引入目标相关系数用于反演结果全局寻优,实现对多次反射的压制,降低浅部钢筋反射信号对识别深部目标体的影响。通过对数值模拟结果进行反演,证明该方法理论上的有效性,并结合工程实践中的应用效果,说明该方法的优点与局限性。