Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Initial public offerings in the port industry: exploring the determinants of underpricing

The capital-intensive nature of the port industry and the long payback period of port investments traditionally determine high financial needs for operating the business. Due to the growing financial requirements for developing greenfield mega-projects and feeding international terminal operators’ overseas expansion, equity markets are expected to extend their role in promoting the industry. In this perspective, the underpricing phenomenon, which represents a direct cost for the issuer during initial public offering (IPO) and discourages companies from going public, is neglected by port literature. The paper explores the antecedents of IPO underpricing in ports. Building upon extant finance and port literature, firm characteristics, transaction features, and country-specific variables are tested as determinants of IPOs’ initial returns. For the aim of this study, 58 port-related IPOs taking place on international stock exchanges are examined, and ordinary least squares regression analysis is performed. The study offers unprecedented understandings of the phenomenon and supports port managers in facing financial challenges. Before launching the IPO, financial executives are invited to carefully identify time-window opportunities, and to monitor underwriters’ reputation when selecting financial partners. Findings bring insights for policymakers, as the public listing of port companies emerges a viable option for implementing port reform.     

地铁暗挖隧道二次衬砌施工质量控制浅析

文章根据深圳轨道交通二期工程安托山站—侨香站暗挖区间的二次衬砌施工经验,分析了地铁暗挖隧道二次衬砌施工质量的影响因素以及二次衬砌施工过程中容易发生的质量问题,并提出了具体的控制措施。通过经验总结,使地铁施工的管理、质量控制、施工通病防治上升一个台阶。     

装配式码头灌浆连接节点压弯性能试验研究

对3组装配式码头灌浆连接节点试件进行压弯试验,研究不同灌浆长度和灌浆厚度下灌浆节点的压弯承载力、延性和破坏模式。结果表明,灌浆节点试件具有较好的延性和较高的承载力,灌浆节点受压弯荷载的破坏模式为钢管的压屈破坏;压弯构件的极限承载力随着灌浆长度的增大而增大;灌浆厚度的变化对构件的承载力影响不大,但灌浆厚度增大可以提高灌浆体底部的抗裂能力,建议实际应用时适当增大灌浆厚度。     

丽香铁路黄山哨隧道下穿岩堆段设计施工关键技术

以下穿岩堆段的丽香铁路黄山哨隧道为工程依托,对岩堆段地表开裂及洞内初期支护边墙严重变形的问题进行研究。地表埋设6根测斜管监测地表位移情况,洞内布置3个断面进行围岩压力、钢架内力、二次衬砌内力、初期支护与二次衬砌间的接触压力、锚杆轴力量测。在分析现场岩堆段洞内外受力机制及原因的基础上,根据数值计算结果优化二次衬砌断面型式及进一步加大二次衬砌厚度及配筋。采取以下措施控制隧道岩堆段变形： 1）地表岩堆土石接触面开裂处增设截排水措施; 2）加大隧道初期支护钢架型号及加长岩堆侧边墙径向系统锚杆; 3）加大隧道边墙轮廓曲率并优化隧道二次衬砌型式为圆顺型; 4）隧道预留变形量加大至30 cm; 5）隧道二次衬砌内净空预留50 cm补强空间; 6）隧道拱部设置42小导管超前支护。现场岩堆段采取以上措施后已顺利施工通过,根据洞内外监测结果显示,结构在安全可控范围内。     

番禺气田珠海终端外涂层检测与失效分析

通过分析番禺气田珠海终端工艺管线涂层类型、涂层缺陷,根据涂层所处的腐蚀环境以及原始设计规范要求,结合影响涂层寿命的4个因素,对整个工艺管线按区域进行了涂层厚度检测与失效统计,评估了工艺管线外涂层的整体状况,分析了涂层腐蚀失效的原因.结果表明:终端管线外涂层存在缺陷,涂层厚度达不到设计要求,而焊缝及法兰出现的腐蚀主要由管线内外腐蚀环境、涂层质量及表面处理质量不好所致.     

不同发射参数下潜射鱼雷初始弹道建模与仿真

为研究潜射鱼雷发射参数设定对鱼雷初始弹道的影响,建立鱼雷初始弹道数学模型,对鱼雷在纵平面的初始弹道进行了研究,利用Simulink编程进行了仿真,得出在不同发射参数设定下弹道的袋深、最大超调量和到达设定深度所需时间.仿真结果表明,鱼雷横舵管制舵角和出管速度对鱼雷初始弹道都有影响,其中鱼雷横舵管制舵角影响较大,为进一步优...     

基于Halcon及VS的动车组制动闸片厚度自动识别模块

研究基于图像处理和模式识别的动车组闸片厚度自动识别模块,解决动车组制动时因闸片过薄而导致的车轮迅速升温,甚至引发不安全状态的问题.该模块可实现动车组通过时自动检测,即自动拼图、图像预处理、模型定位及制动闸片厚度计算,并对厚度小于一定数值的闸片进行自动报警.通过大量实验和测试表明,该模块可以有效地计算闸片的厚度,具有很好...     

初始条件对高速铁路车桥耦合动力响应的影响

列车驶入桥梁时,必然带有一定的初始条件,此值对计算车桥耦合振动中桥梁的动力响应有较大的影响。针对这一问题,通过在路基上运行不同的长度区间,以不同的行车速度、不同的车辆类型,对高速铁路车桥耦合振动的初始条件加以分析。可知当行车速度相同时,取不同的行车区间,竖向位移几乎不受影响,横向位移与所选取的运行区间有关。桥梁跨中横向位移还与选取的车型有关。     

断层破碎带隧道衬砌静力稳定性分析

结合一实际工程,选取包括断层破碎带和断层影响带在内的沿隧道纵向300m的计算区域,用八节点六面块体单元将计算区域离散化,采用三维弹塑性静力有限元法模拟分析隧道各个施工阶段,以及建成后围岩和衬砌的受力与变形状态。通过分析比较可知:(1)断层破碎带处的坑道变形和围岩塑性区均明显比非断层破碎带处要大;(2)由于断层破碎带的影响,初期支护、二次衬砌内力的增加幅度约为10%～30%。