三边长后方交会在精密测量工程中的应用

文章以广西贵港西江航运建设二期工程船闸安全监测项目为例,介绍了三边长后方交会法的基本原理,推导出三边长后方交会法的坐标计算、平差公式等,分析了其误差来源和控制措施,论证了三边长后方交会在精密测量工程中的可行性与优越性。     

公共电动自行车系统运营模式设计模型

当前对传统公共自行车系统运营模式的研究主要是定性分析,各种方法标准不一,且研究结论与实际差别较大,不能直接用于资金、设施等要求更高的公共电动自行车系统的运营模式设计问题.因此,提出了一种定量设计模型,利用0-1混合整数规划模型对系统的经营主体进行筛选,再利用动态规划模型分配资源.利用算例进行模拟分析,结果表明:①与以资金多和收益好为优的常规的定性分析法相比,定量模型能更合理配置系统构成要素,降低政府的财政负担,分别为政府节省18.68%和23.09%的资金.②在公共电动自行车系统建设和运营过程中,宜采用政企合作模式.③相对于系统运营而言,系统建设期间对政府投入的资金反应更灵敏,因此政府有必要加大建设期的资金投入.     

Liner shipping network design with emission control areas: A genetic algorithm-based approach

To curb emissions, containerized shipping lines face the traditional trade-off between cost and emissions (CO₂ and SO_x) reduction. This paper considers this element in the context of liner service design and proposes a mixed integer linear programming (MILP) model based on a multi-commodity pickup and delivery arc-flow formulation. The objective is to maximize the profit by selecting the ports to be visited, the sequence of port visit, the cargo flows between ports, as well as the number/operating speeds of vessels on each arc of the selected route. The problem also considers that Emission Control Areas (ECAs) exist in the liner network and accounts for the vessel carrying capacity. In addition to using the MILP solver of CPLEX, we develop in the paper a specific genetic algorithm (GA) based heuristic and show that it gives the possibility to reach an optimal solution when solving large size instances.     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

柴油机管理系统开发与设计方法的研究

根据国内外柴油机电控技术开发与设计的经验，阐述了开发与设计柴油机管理系统所采用的最新技术与方法。通过新技术与新方法的运用，提高整个系统功能控制和以数管理的性能，最终达到改善柴油机经济性，动力性及排放等的目的。     

山区公路选线关键问题探讨

以山西临汾某新建二级公路为例,总结一些经验和教训,提出几点山区公路选线需要注意的问题。     

网络计划工期－费用的动态规划决策

关键路线法中网络计划工期－费用优化，可以化为一系列单阶段决策，构成确定性离散优化决策问题，本文试用动态规划处理这一过程。     

日本轨道交通与土地的综合开发

分析日本国土开发利用、轨道交通建设运营、以及轨道交通与土地综合开发的成功经验。日本是世界上人口密度最大的国家,采取以轨道交通为骨干的公共交通为主导的城市发展策略,由于轨道交通建设经营主体的多元化,铁道主业与其它产业的兼营,特别是轨道交通与土地的综合开发利用,成功的解决了城市交通问题,实现了轨道交通的商业化建设与运营,实现了城市经济、社会、环境、交通的协调发展。     

焊接工艺对不规则厚壁球台结构变形的影响

潜艇建造过程中,耐压壳体过渡环结构的焊接变形是潜艇性能的重要指标。为准确预测过渡环结构的焊接变形,基于ANSYS软件编写了焊接计算程序,对T型梁结构的焊接过程进行模拟,将数值计算结果与物理实验结果进行了对比。提出了厚壁结构焊接变形预测的固有应变弹塑性有限元方法,分析了不规则厚壁球台结构的焊接工艺,得到了不同焊接工艺时厚壁球台结构的焊接变形。通过多种焊接工艺的对比分析,找到了不规则厚壁球台结构的最佳焊接工艺。     

一种基于小波的盲提取信息隐藏

提出了一种基于小波的盲提取信息隐藏算法。将载体进行小波分解，根据低频区域小波系数的重要比特位选择中频区域隐秘信息的嵌入位置。再将经过了预处理的隐秘信息映射到已确定的嵌入位置，最终通过小波反变换生成含有隐秘信息的伪对象。提取则是嵌入的反过程。试验表明此方法的隐藏效果较好，伪对象与原始载体的区别不易被人眼察觉。提取时不需要原始载体，具有一定的抗攻击性。