水力式升船机竖井内水体的振动分析

地震荷载下升船机系统内水体与浮筒间的耦合作用是影响升船机安全运行的一个难题。通过流体动力学模拟(CFD)方法,讨论在不同频率的正弦激励下升船机竖井内水体的振荡。结果表明:竖井的水体存在一个自振频率,此频率比相同径度、相同水深的矩形池的值大约10%,自振周期约为0.42s;竖井水体的自振频率基本不随高度变化。     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

An integrated framework for embedding large-scale dynamic traffic assignment models in advanced traveler information systems

In recent years, increasing attention has been drawn to the development of various applications of intelligent transportation systems (ITS), which are credited with the amelioration of traffic conditions in urban and regional environments. Advanced traveler information systems (ATIS) constitute an important element of ITS by providing potential travelers with information on the network's current performance both en-route and pre-trip. In order to tackle the complexity of such systems, derived from the difficulty of providing real-time estimations of current as well as forecasts of future traffic conditions, a series of models and algorithms have been initiated. This paper proposes the development of an integrated framework for real-time ATIS and presents its application on a large-scale network, that of Thessaloniki, Greece, concluding with a discussion on development and implementation challenges as well as on the advantages and limitations of such an effort.     

Evaluation of pedestrian crosswalk level of service (LOS) in perspective of type of land-use

In India pedestrians usually cross the road at mid-block crosswalks due to ease of access to their destination or the development of adjacent land use types such as shopping, business areas, school and residential areas. The behaviour of pedestrian will change with respect to different land use type and this change in behaviour of pedestrian further reflects change in perceived level of service (LOS). So, it is important to evaluate the quality of service of such crossing facilities with respect to different land-use type under mixed traffic conditions. In this framework, pedestrian perceived LOS were collected with respect to different land-use type such as shopping, residential and business areas. The ordered probit (OP) model was developed by using NLOGIT software package, with number of vehicles encountered, road crossing difficulty as well as safety considered as primary factors along with pedestrian individual factors (gender and age), land-use type and roadway geometry. From the model results, it has been concluded that perceived safety, crossing difficulty, land-use condition, number of vehicles encountered, median width and number of lanes have significant effect on pedestrian perceived LOS at unprotected (un-signalized) mid-block crosswalks in mixed traffic scenario. The inferences of these results highlights the importance of land use planning in designing a new set of pedestrian access facilities for unprotected mid-block crosswalks under mixed traffic conditions. Also the study results would be useful for evaluating pedestrian accessibility taking into account different land-use type and planning required degree of segregation with vehicular movement at unprotected mid-block crosswalk locations.     

基于价值函数的城市绿色交通规划评价

为了评价城市绿色交通,建立了城市绿色交通评价体系,包括环保性指标等3个评价项目和道路绿化率等8个评价指标,文章通过案例分析发现,价值函数法适用于城市绿色交通评价。采用专家打分法确定指标权重系数,并对指标进行无量纲化、同趋向化等处理,采用价值函数法计算评价体系得分。     

公路隧道运营通风横通道周围流场特性研究

为研究公路隧道巷道式运营通风横通道周围的流场特性,以贵州凉风坳隧道为研究背景,利用流体力学研究软件Fluent建立隧道三维模型并进行了数值仿真计算。通过在隧道两边等风速条件下,对隧道内人行横通道以及车行横通道附近的流场特点研究,分析了运营通风横通道周围流场分布的具体特点。模拟结果表明:车行横通道与人行横通道两边流场分布基本相同;横通道内风速相对较小,约为隧道内风速的10%;不同风速下,横通道附近的速度分布和总压分布整体走势一致;两边流场相对稳定,不会进行风流和污染物的串流。     

Bush-based sensitivity analysis for approximating subnetwork diversion

Subnetwork analysis is often used in traffic assignment problems to reduce the size of the network being analyzed, with a corresponding decrease in computation time. This is particularly important in network design, second-best pricing, or other bilevel problems in which many equilibrium runs must be solved as a subproblem to a master optimization program. A fixed trip table based on an equilibrium path flow solution is often used, but this ignores important attraction and diversion effects as drivers (globally) change routes in response to (local) subnetwork changes. This paper presents an approach for replacing a regional network with a smaller one, containing all of the subnetwork, and zones. Artificial arcs are created to represent “all paths” between each origin and subnetwork boundary node, under the assumption that the set of equilibrium routes does not change. The primary contribution of the paper is a procedure for estimating a cost function on these artificial arcs, using derivatives of the equilibrium travel times between the end nodes to create a Taylor series. A bush-based representation allows rapid calculation of these derivatives. Two methods for calculating these derivatives are presented, one based on network transformations and resembling techniques used in the analysis of resistive circuits, and another based on iterated solution of a nested set of linear equations. These methods are applied to two networks, one small and artificial, and the other a regional network representing the Austin, Texas metropolitan area. These demonstrations show substantial improvement in accuracy as compared to using a fixed table, and demonstrate the efficiency of the proposed approach.     

A stochastic model of traffic flow: Theoretical foundations

In a variety of applications of traffic flow, including traffic simulation, real-time estimation and prediction, one requires a probabilistic model of traffic flow. The usual approach to constructing such models involves the addition of random noise terms to deterministic equations, which could lead to negative traffic densities and mean dynamics that are inconsistent with the original deterministic dynamics. This paper offers a new stochastic model of traffic flow that addresses these issues. The source of randomness in the proposed model is the uncertainty inherent in driver gap choice, which is represented by random state dependent vehicle time headways. A wide range of time headway distributions is allowed. From the random time headways, counting processes are defined, which represent cumulative flows across cell boundaries in a discrete space and continuous time conservation framework. We show that our construction implicitly ensures non-negativity of traffic densities and that the fluid limit of the stochastic model is consistent with cell transmission model (CTM) based deterministic dynamics.     

Recursive estimation of average vehicle time headway using single inductive loop detector data

Vehicle time headway is an important traffic parameter. It affects roadway safety, capacity, and level of service. Single inductive loop detectors are widely deployed in road networks, supplying a wealth of information on the current status of traffic flow. In this paper, we perform Bayesian analysis to online estimate average vehicle time headway using the data collected from a single inductive loop detector. We consider three different scenarios, i.e. light, congested, and disturbed traffic conditions, and have developed a set of unified recursive estimation equations that can be applied to all three scenarios. The computational overhead of updating the estimate is kept to a minimum. The developed recursive method provides an efficient way for the online monitoring of roadway safety and level of service. The method is illustrated using a simulation study and real traffic data.     

A model for the visualization and analysis of elevator traffic

ABSTRACT

Analysis of elevator traffic in high rise buildings is critical to the performance evaluation of elevator group control systems (EGCS). Elevator dispatching methods or parking algorithms in an EGCS can be designed or modified according to analyses of traffic flow. However, interpretation of traffic flow based solely on numerical data may not be explicit and transparent for EGCS experts as well as for other non-expert building administration. In this study, we present a model for visualization and analysis of elevator traffic. First, we present an alternative approach for traffic analysis which we call route visualization. In the proposed approach, we initially decompose elevator traffic into its component parts and investigate each component independently. Then, using superposition of components we obtain a reconstructed model of overall traffic. This modeling approach provides component-based traffic analysis and representation of routes with intensities through data visualization. In the second part we introduce a multi-dimensional analysis of time parameters in ECGS. This approach provides a comparative analysis of several control algorithms such as dispatch or park algorithms for different combinations of traffic components.