Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem

This paper proposes simple and direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem. It is only necessary to account for random variables independent of link flows by performing a simple transformation of the perceived link travel time with a normal distribution. At every iteration of a Monte-Carlo simulation procedure, the values of the random variables are sampled based on their probability distributions, and then a regular deterministic user equilibrium assignment is carried out to produce link flows. The link flows produced at each iteration of the Monte-Carlo simulation are averaged to yield the final flow pattern. Two test networks demonstrate that the proposed algorithms and the traditional algorithm (the Method of Successive Averages) produce similar results and that the proposed algorithms can be extended to the computation of the case in which the random error term depends on measured travel time.     

不同冷却方式对大尺寸钢板感应加热成形的影响

为有效解决船用中厚钢板复杂曲面加工问题,本文探究了空气冷却、正面水冷和反面水冷方式对大尺寸钢板弯曲成型的影响因素。首先采用COMSOL Multiphysics仿真平台模拟了电磁感应加热和冷却变形多物理场同步耦合过程,然后分析了各种因素对大尺寸钢板弯曲成型影响,最后通过实验验证了有限元模型的可靠性,并对感应加热弯曲成型效果进行评估。研究结果表明:(1)相对于水冷,空冷对钢板Y向位移改变效果显著。(2)相对于空冷,水冷对钢板角位移的改变影响明显。(3)当频率为50kHz时,电流频率对表面温度和角位移影响显著。(4)当钢板长宽比≥1:2时,Y向位移的增加比较显著;当长宽比≈1:1时,角位移的改变比较明显。     

改进的锤击法测量原点阻抗

机械阻抗是机械系统特性的集中参数表示, 是解决机械系统耦合问题的一个重要工具。现有的机械阻抗方法有激振器激振传感器,冲击锤敲击实验结构等方法,但都有各自的局限性。本文提出了改进的锤击法测量原点阻抗。通过实验对比,对其可行性进行了研究,证明了此种方法可以快速并较为准确的获得结构的原点阻抗,具有工程实用性。     

嵌岩桩竖向承载力预测方法

现行规范计算方法不同、参数取值不一,导致各类设计方案差异较大。基于收集的193组嵌岩桩静载试验数据,对各类极限侧阻力、端阻力预测方法的适用性进行研究,分别建立了不同岩石类型极限侧阻力、端阻力与岩体无侧限抗压强度的关系。在此基础上,给出了嵌岩桩竖向承载力的建议计算方法。结合试验实测资料验证了推荐方法的可行性,并与现行规范方法进行比较。结果表明,对于硬质岩层嵌岩桩竖向承载力的确定,现行规范方法计算结果偏大,用于工程设计时偏于危险,建议采用推荐的计算方法。     

浅插法大直径钢圆筒在换砂振沉施工中的应用

大直径钢圆筒凭借其特有的优势被应用在大型人工岛护岸项目中.以某大型人工岛项目为例,针对浅插法大直径钢圆筒施工中遇到的一些实际问题进行方案比选.通过对振沉方法、纠偏方式、振沉顺序等技术方案的分析对比,总结出浅插法大直径钢圆筒在换砂基础中应用的主要工艺:点振法振沉工艺、起重船纠偏工艺和顺、跳打振沉顺序.     

桩-土-承台相互作用的有限元简化模型

针对低桩承台结构计算中往往只考虑桩土作用,忽视承台与土相互作用的问题,通过工程实例,建立考虑桩-土-承台相互作用的低桩承台有限元简化模型,分析桩间土的承载作用对承台和桩内力的影响。结果表明:在简化模型中考虑桩间土的承载作用后,承台弯矩和桩基轴力可减少35%～40%;桩身弯矩和剪力主要受水平力和土体m值影响;桩基轴力随地基土基床系数的增大而逐渐减小,但减幅逐渐趋缓。     

吹填造陆工程砂土地基沉降计算

针对目前越来越多的大面积吹填造陆工程中出现的地基沉降计算问题,对目前常用的大面积砂土地基沉降计算方法De Beer计算方法进行了分析研究。通过依托工程的现场试验数据对De Beer公式中所涉及的参数进行讨论,得出合适的沉降计算公式。最后通过比较现场实测沉降的预测值,证明该分析方法和流程可以很好地用于大面积砂土地基沉降计算中。     

汉江雅口航运枢纽泄水闸工程地基处理

汉江雅口航运枢纽工程泄水闸地基为不均匀的砂砾石土层,建基面局部为粉细砂薄层,砂砾石土层局部含有粉细砂透镜体或大块卵石。针对地基沉降量大和砂砾石土层分布不均匀的问题,提出了长螺旋钻孔压灌桩复合地基处理方案,并在现场代表性区域进行了成桩试验检测。结果表明:该地基处理方案技术可行、质量稳定、生态环保,适宜于本工程的应用,具有推广价值。     

砂岩石粉含量对机制砂混凝土劈裂抗拉强度的影响及机理研究

劈裂抗拉强度是评价混凝土抗裂性能重要的力学指标,试验分析砂岩机制砂石粉含量对混凝土劈裂抗拉强度影响及机理。结果表明:砂岩机制砂中石粉含量对不同强度等级混凝土的工作性、劈裂抗拉强度影响不同,对C35和C45强度等级的机制砂混凝土,当机制砂中石粉含量为7%~13%和5%~8%时,随石粉含量的增加,新拌混凝土和易性得到改善,混凝土抗压强度及劈裂抗拉强度不断提高;建立砂岩机制砂混凝土劈裂抗拉强度与抗压强度之间的数学公式:lg f_(sp)=0.309 7lg f_(cu)+0.102 6,机制砂混凝土的劈裂抗拉强度优于普通混凝土,具有更为优异的抗裂性能。机制砂石粉的颗粒效应、化学活性是机制砂混凝土劈裂抗拉性能的主要影响因素。