薄壁高墩大跨连续刚构桥地震时程反应参数研究

运用大质量法,建立并推导了长大跨度桥梁考虑行波效应的分析模型及解析方程。以内蒙古小沙湾黄河特大桥为工程背景,选取墩身刚度、地震波视波波速、地震波激励方向等主要参数,建立动力计算模型,对该桥上述各种参数工况下地震时程反应作了参数对比分析研究。利用分析结果,探讨了同类桥梁在各种参数变化情况下墩顶位移和墩底内力的变化规律。     

一种适用于大变形支护的新型可伸长锚杆

支护理论的发展对锚固技术提出了新的要求,即要与围岩变形相协调,允许围岩可控变形,充分发挥围岩的自支撑能力。基于此设计了一种适用于大变形支护的新型可伸长锚杆,该型锚杆在达到初始锚固力后,在保持与围岩协调变形的伸长过程中锚固力可基本保持恒定,达到围岩许用变形形值后,锚固力急速上升。室内与现场试验证实了新型可伸长锚杆协调围岩大变形的优良性能,可在围岩大变形支护中推广应用。可伸长。     

基于非参数回归的快速路行程速度短期预测算法

基于北京市快速路上的检测器所采集的历史数据，经过数据筛选，剔除判别，小波滤噪平稳处理，聚类分析等过程，建立了交通状态演变系列的历史样本数据库。基于所构建的历史数据库，通过数值试验，确定了状态向量、距离匹配原则，K近邻值等参量，构建了一种基于K近邻的非参数回归短时交通预测模型，实现了对路段行程速度的短时预测。最后，利用随机选取的历史数据系列对预测模型的精度进行了检验。结果表明，预测算法的精度可以达到90％以上，可以很好地满足ITS应用系统对于交通预测数据的精度要求。     

五河口斜拉桥超长大直径工程试桩研究

为获取五河口斜拉桥超长大直径工程桩的极限承载力值，对2根直径2．5m桩长95m的工程桩，采用桩基静栽试验自平衡法单、双荷载箱技术进行试桩研究，为最终确定桥墩桩基础设计提供了直观的参考依据。该试桩方法适合特大型桥梁桩基施工场地小、试验时间短、试桩荷载大的要求，试桩经注浆补强工艺后可作工程桩应用。     

Transient responses of a VLFS during landing and take-off of an airplane

The transient elastic deformation of a pontoon-type very large floating structure (VLFS) caused by the landing and take-off of an airplane is computed by the time-domain mode-expansion method. The memory effects in hydrodynamic forces are taken into account, and great care is paid to numerical accuracy in evaluating all the coefficients appearing in the simultaneous differential equations for the elastic motion of a VLFS. The time-histories of the imparted force and the position and velocity of an airplane during landing and take-off are modeled with data from a Boeing 747-400 jumbo jet. Simulation results are shown of 3-D structural waves on a VLFS and the associated unsteady drag force on an airplane, which is of engineering importance, particularly during take-off. The results for landing show that the airplane moves faster than the structural waves generated in the early stage, and the waves overtake the airplane as its speed decreases to zero. The results for take-off are essentially the same as those for landing, except that the structural waves develop slowly in the early stage, and no obstacle exists on the runway after the take-off of airplane. The additional drag force on an airplane due to the elastic responses of the runway considered in this work was found to be small in magnitude.     

墩台施工监理中的若干问题

针对工程的特殊性 ,管理人员在质量控制方面及相关协调工作方面进行了必要的调整和大胆尝试 ,最终促成该项目的圆满完成。     

基于相对变形的大变形隧道地应力反算

针对复杂地质条件下高地应力大变形隧道地应力复杂多变的特点，为满足该类隧道动态设计对地应力资料的要求，提出基于上台阶开挖后拱腰水平收敛与拱顶下沉的相对比值并结合开挖揭示的围岩情况，建立二维数值模型反算地应力的方法。以丽江至香格里拉铁路中义隧道为例，对该方法进行详细说明。研究表明所述方法具有无需地应力测试、计算方便的优点，施工期间可用于地应力分析、预测。中义隧道典型区段地应力反算结果表明： 1）隧道出口及2号横洞工区的地应力分布特点并不相同； 2）围岩及埋深差别不大的区段，隧道水平收敛变形出现较大差异主要是由于地应力侧压力系数不同引起的。     

Optimal selection of suspension parameters in large scale vehicle models

Optimum values are selected for the suspension damping and stiffness parameters of complex car models, subjected to road excitation, by applying suitable numerical methodologies. These models result from a detailed finite-element discretisation and possess a relatively large number of degrees of freedom. They also involve strongly nonlinear characteristics, due mostly to large rigid body rotation of some of their components and the properties of the connection elements. First, attention is focused on gaining some insight into the dynamics of the mechanical models examined, resulting when the vehicle passes over roads involving typical geometric profiles. Then, the emphasis is shifted to presenting results obtained by applying appropriate optimisation methodologies. For this purpose, three classes of design criteria are first set up, referring to passenger ride comfort, suspension travel and car road holding and yielding the most important suspension stiffness and damping parameters. Originally, the optimisation is performed by forming a composite cost function and employing a single-objective optimisation method. Since the design criteria are conflicting, a multi-objective optimisation methodology is also set up and applied subsequently.     

路网环境下考虑大型车混入率的事故疏散诱导模型

大型车的混入对高速公路交通流产生了较大的影响，尤其是在交通事故情景下。为了引导事故条件下驾驶人和组织者做出高效准确的决断，将考虑了大型车混入率的动态空间占有率模型引入到交通波模型，构建干涉与非干涉情景下的交通事故影响模型。以郑尧高速为例，对模型的准确性和可行性进行了验证，分别对干涉情景下的疏散时间、疏散量以及事故发生的位置，车辆数等指标与事故影响程度的指标（包含事故最远排队长度，事故持续时间）关系进行分析。研究结果表明：疏散时间与事故影响程度成正相关关系，疏散量与事故影响程度成负相关关系，而事故发生点与上游匝道之间的距离与其关系不大；道路服务水平为0.456，车辆数为1 321 veh·h^-1时，为了使得分合流区不受影响，在不采取任何措施的情景下，应将大型车混入率控制在50.1%以下，使得最远排队长度在10 km内；当大型车混入率大于58%时，将很难通过干涉引导避免对上游分合流区产生影响；在35 min以内采取干涉措施的效果最为明显，而大于35 min时，事故持续时间会发生一个急剧的增加，不利于路网恢复，之后事故恢复时间将趋于平稳；对道路交通量进行模拟可知交通量每增加50 veh，疏散时间和距离增加的范围为[1.5 min，3.6 min]和[1.209 km，1.543 km]。研究结果可为高速公路事故诱导策略制定和疏散效果提升提供参考。     

一种轻型天线稳定平台的设计

介绍了一种适用于大振动、冲击、强电磁干扰、倒单摆式大惯量负载等特殊要求的轻型天线稳定平台的机电一体化设计.可对类似的应用提供有用的借鉴.