中小跨径公路混凝土简支梁桥冲击系数研究及建议取值

为弥补中国现行桥梁规范中计算动力冲击系数时考虑因素单一的不足,对冲击系数的影响因素进行研究,并提出更合理的冲击系数建议值。首先,根据中国桥梁通用图集建立13座不同截面形式和不同跨径的常见中小跨径公路混凝土简支梁桥的有限元模型,结合能表征中国设计车辆荷载动力特性的三维车辆数值模型,建立车桥耦合振动分析系统。然后,基于车桥耦合振动分析系统,研究桥梁基频、桥面不平整度、车速和车质量等因素对动力冲击系数的影响,并与中国现行桥梁设计规范中的动力冲击系数取值进行对比分析。最后,提出冲击系数的建议值,并与世界各国桥梁规范中的冲击系数取值进行对比,讨论建议值的合理性。结果表明:桥面不平整度是影响冲击系数的重要因素,在桥面好的情况下,冲击系数均在0.1以下,低于规范中规定的冲击系数,而桥面很差时,冲击系数可达0.5,远大于中国现行规范中的冲击系数设计值,因此,定期对桥面进行维护能有效减小车辆对桥梁的冲击效应;质量轻的车辆引起更大的冲击系数,但由于车辆总质量轻,其导致的总荷载效应仍然较小,而重车虽然引起的冲击系数较小,但由于其导致的总荷载效应较大,更易对桥面造成损伤,因此,限制超载尤为重要。     

动态当量夹角在商用车产品开发中的应用研究

在商用车传动轴系统布置设计时，为避免因万向节传动输出轴与输入轴的转角差引起车辆异常振动，应使空载静止和满载静止工况下的传动轴当量夹角、最大夹角及角加速度幅值满足设计要求。研究表明，在某些工况下，仅校核空载静止和满载静止工况下的传动轴系统布置的相关参数，不能完全避免因传动轴系统布置设计引起的整车异常振动问题。因此分析了满载爬坡工况下动态当量夹角对整车异常振动的影响，表明了在进行商用车传动轴系统布置设计时，还需使满载爬坡工况下的动态当量夹角以满足设计要求。     

Investigating the influence of soil properties on railway traffic vibration using a numerical model

This paper presents the influence of dynamic and geometrical soil parameters on the propagation of ground vibrations induced by external loads. The proposed approach is based on a three-dimensional model, focusing on realistic excitation sources like impulse loads and moving railway vehicles. For the latter, a complete vehicle/track model is developed. The simulation is performed in time domain, offering an interesting approach, compared with classic cyclic analyses. The ground is modelled initially as an elastic homogeneous half-space and additionally as a layered half-space. First, the effect of homogeneous soil properties on ground vibration is analysed. Soil stratification is then taken into account, using various configurations. Analysis reveals that as receiver distance increases ground wave reflection in a layered ground plays an important role in the reduction of ground surface motion. This effect is magnified when the phase velocity wavelength becomes large compared with the depth of the surface layer.     

基于模态分析的发动机齿轮室盖优化设计

某柴油发动机齿轮室盖在试验中振动较大,为解决这一问题,文章采用声学振动测试与CAE模态分析相结合的方法,对齿轮室盖进行优化设计,并进行试验验证。结果证明通过在齿轮室盖薄弱位置处添加加强筋,可以有效提高其固有频率,避开发动机在3600r/min转速下的主要贡献频率,改善齿轮室盖的振动情况。CAE模态分析方法能够有效识别结构件的薄弱区域,通过加强局部刚度,改善振动性能。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives

In this study, in order to examine the effects of a wheelset driving system suspension parameters on the re-adhesion performance of locomotives, the stick–slip vibration was analysed according to theoretical and simulation analysis. The decrease of the slip rate vibration amplitude improved the stability of the stick–slip vibration and the re-adhesion performance of locomotives. Increasing the longitudinal guide stiffness of the wheelset and the motor suspension stiffness were proposed as effective measures to improve the re-adhesion performance of locomotives. These results showed that the dynamic slip rate was inversely proportional to the series result of the square root of the longitudinal guide and motor suspension stiffness. The larger the motor suspension stiffness was, the smaller the required longitudinal guidance stiffness was at the same re-adhesion time once the wheel slip occurred, and vice versa. The simulation results proved that the re-adhesion time of the locomotive was approximately proportional to amplitude of the dynamic slip rate. When the stick–slip vibration occurred, the rotary and the longitudinal vibrations of the wheelset were coupled, which was confirmed by train's field tests.     

Coupler jackknifing and derailments of locomotives on tangent track

A number of derailments occurred in recent years due to coupler jackknifing, some of them were reported on tangent tracks where conventionally thought to be the safer sections. This article studied coupler jackknifing behaviour and its implications for locomotive safety on tangent tracks from the experience of China heavy haul. Three types of coupler systems were modelled and simulated regarding coupler jackknifing behaviour. Two typical locomotive derailments occurred on tangent tracks were analysed. From the derailment experience, coupler angle self-lock behaviour was introduced and simulated. An approach to determine coupler angles in the jackknifed position was derived and validated with a self-coded program and SIMPACK. Methods to prevent coupler jackknifing were also evaluated with regard to locomotive stability.     

满堂支架法直腹板现浇箱梁横向抗推研究

满堂支架法作为一种成熟的施工技术手段,目前被大量应用于城市桥梁现浇主梁的施工项目中.具有施工方便、周转时间短和辅助设备少的优点.但对于直腹板现浇箱梁,尤其是主梁较窄的现浇箱梁,由于混凝土侧压力、倾倒混凝土产生的水平荷载以及振捣产生的水平荷载存在,使得腹板处支架存在较大的水平推力,导致整个结构处于危险状态.以某工程项目为依托,提出了两种解决方案,通过调整斜撑布置形式对结构受力状态进行改善.结果 表明,两种方案均可有效降低水平推力作用下造成结构局部应力集中的现象,有利于不利荷载均匀向整个支架结构传递.     

Lateral dynamics emulation via a four-wheel steering vehicle

In this paper, we examine the lateral dynamics emulation capabilities of an automotive vehicle equipped with four-wheel steering. We first demonstrate that the lateral dynamics of a wide range of vehicles can be emulated, either with little or with no modification on the test vehicle. Then we discuss a sliding mode controller for active front and rear wheel steering, in order to track some given yaw rate and side-slip angle. Analytically, it is shown that the proposed controller is robust to plant parameter variations by±10%, and is invariant to unmeasurable wind disturbance. The performance of the sliding mode controller is evaluated via computer simulations to verify its robustness to vehicle parameter variations and delay in the loop, and its insensitivity to wind disturbance. Finally, the emulation of a bus, a van, and two commercially available passenger vehicles is demonstrated in an advanced nonlinear simulator.     

Theoretical and experimental excitation force spectra for railway-induced ground vibration: vehicle–track–soil interaction,irregularities and soil measurements

Excitation force spectra are necessary for a realistic prediction of railway-induced ground vibration. The excitation forces cause the ground vibration and they are themselves a result of irregularities passed by the train. The methods of the related analyses – the wavenumber integration for the wave propagation in homogeneous or layered soils, the combined finite-element boundary-element method for the vehicle–track–soil interaction – have already been presented and are the base for the advanced topic of this contribution. This contribution determines excitation force spectra of railway traffic by two completely different methods. The forward analysis starts with vehicle, track and soil irregularities, which are taken from literature and axle-box measurements, calculates the vehicle–track interaction and gets theoretical force spectra as the result. The second method is a backward analysis from the measured ground vibration of railway traffic. A calculated or measured transfer function of the soil is used to determine the excitation force spectrum of the train. A number of measurements of different soils and different trains with different speeds are analysed in that way. Forward and backward analysis yield the same approximate force spectra with values around 1 kN for each axle and third of octave.