钢夹层板数值模拟技术(英文)

Sandwich plate systems (SPS) are advanced materials that have begun to receive extensive attention in naval architecture and ocean engineering. At present, according to the rules of classification societies, a mixture of shell and solid elements are required to simulate an SPS. Based on the principle of stiffness decomposition, a new numerical simulation method for shell elements was proposed. In accordance with the principle of stiffness decomposition, the total stiffness can be decomposed into the bending stiffness and shear stiffness. Displacement and stress response related to bending stiffness was calculated with the laminated shell element. Displacement and stress response due to shear was calculated by use of a computational code write by FORTRAN language. Then the total displacement and stress response for the SPS was obtained by adding together these two parts of total displacement and stress. Finally, a rectangular SPS plate and a double-bottom structure were used for a simulation. The results show that the deflection simulated by the elements proposed in the paper is larger than the same simulated by solid elements and the analytical solution according to Hoff theory and approximate to the same simulated by the mixture of shell-solid elements, and the stress simulated by the elements proposed in the paper is approximate to the other simulating methods. So compared with calculations based on a mixture of shell and solid elements, the numerical simulation method given in the paper is more efficient and easier to do.     

Mg_x Ni_y(x=1,2;y=1～5)团簇结构与光谱性质的理论研究

用密度泛函理论(Density Function Theory,DFT)的杂化密度泛函B3LYP方法在6-311+g基组水平上对MgxNiy(x=1,2;y=1～5)团簇各种可能的构型进行几何结构优化,预测了各团簇的基态结构,并对其振动频率、光谱和极化率等性质进行了理论研究.研究结果表明:MgNiy和Mg2Niy团簇的稳定结构可在相应的MgNiy-1和Mg2Niy-1团簇的基础上加一个Ni原子得到;从光学性质分析,在MgNiy(y=1～5)团簇中,原子间的成键相互作用随y的增加而加强,MgNi2团簇的电子结构相对不稳定;在Mg2Niy(y=1～5)团簇中,电子结构随y的增加而越来越稳定,即结构更加紧凑,Mg2Ni2团簇中原子间的成键相互作用较弱.     

大跨径钢 -UHPC 组合梁桥设计与整体受力分析

嘉兴市市区快速路环线工程跨越京杭大运河地面老桥龙凤桥,采用跨径布置为65 m+95 m+65 m的大跨径钢-UHPC连续组合梁方案,该方案在设计、施工和经济性方面都具有较显著的优势。采用Midas Civil 2021软件建立桥梁空间有限元模型,在承载能力极限状态和正常使用极限状态下各项验算均满足规范要求,可以为类似桥梁设计提供参考。     

分段进水多级 AO 应用于高出水标准市政污水处理厂工程及运行分析

山东省某市政污水处理厂迁建项目迁建后污水厂总处理规模为25×104 m3/d,设计二级处理采用分段进水多级AO,深度处理采用“高效澄清池+V型滤池+臭氧催化氧化”的组合。设计出水标准为地表水准IV类,其中TN＜15 mg/L。2022年山东省发布《山东省城市排水“两个清零、一个提标”工作方案》,要求城市污水处理厂出水标准达到地表水准IV类,其中TN控制在10 mg/L。工程未实施工程性改造,即实现了新的排放标准。     

无锡市某污水处理厂五期工程设计方案

根据《无锡市排水（污水）专项规划（2010—2020）》《无锡市城镇污水处理提质增效行动实施方案（2019—2021）》文件要求,无锡某污水处理厂处理规模需于2025年达到25万m3/d,即扩建3万m3/d。由于五期工程项目边界条件复杂,用地极其紧张,需对厂内现有处理构筑物进行计算分析并加以充分利用,因地制宜,在受限条件下进行挖潜改造。本工程建成投运至今,出水水质稳定达标。通过介绍污水处理工艺AAO+MBR及主要构筑物的设计思路及参数,总结工程特点,为其他类似工程提供借鉴。     

Nano-surface Engineering for Remanufacturing Application

IntroductionWith the rapid development of the world econ-omy, the quantity of waste machinery and elec-tronic products (WMEPs) is increasing at astartling speed. Consequently, the problems of de-stroyed ecological environment, environmental pol-lution, and resource waste have appeared promi-nently. According to the announced statistics morethan 70% discharge that results in the world envi-ronment pollution comes from the manufacturingindustry. 55 hundred million harmless wastes and7 hundred …     

The Evaluation and Selection of Outsourcing Suppliers in Mass Customization （MC）

Many MC companies find it necessary to cooperate with a large number of outsourcing suppliers to provide MC products according to customers＇ diversified orders. To this end, how to select competitve suppliers for the outsourcing manufacturing of non-core processes is the key to establish strong supply chain ally of MC company as well as make the company more efficient in its core manufacturing processes. A procedure of selecting outsourcing suppliers was presented to identify and find competitive suppliers. The continuous improvement of this procedure was proposed to ensure the optimal supply chain of MC company in the long run. Besides, a multi-criteria evaluation model in the procedure was set up according to MC＇s characteristic with fuzzy multi-criteria methods combined to solve the fuzzy problems of criteria weight and qualitative attribute value. A case study of MC manufacturing company was provided to show that the procedure ,model and methods are effective to select outsourcing suppliers.     

Performance Evaluation of List Sphere Detector

IntroductionThis paper aims to address two problems ithe design of“list sphere detector”(LSD)[1]insystem with no system-level iteration between thMIMO detector and the channel decoder. The firsproblem is how to reduce its complexity. Here it ishown that a much smaller list size can be used ithe soft output is approximated appropriately. Alist size of 40 is adequate for a 4× 4 16QAMVBLAST MIMO system. Compared to a 1 02long list used for the same system in Ref.[1], thilist size redu…     

A Novel Algorithm Based on 3D-MUSIC Algorithm for Localizing Near-Field Source

A novel 3-D MUSIC algorithm based on the classical 3D-MUSIC algorithm for the location of near-field source was presented. Under the far-field assumption of actual near-field, two algebraic relations of the location parameters between the actual near-field sources and the far-field ones were derived. With Fourier transformation and polynomial-root methods, the elevation and the azimuth of the far-field were obtained, the tracking paths can be developed, and the location parameters of the near-field source can be determined, then the more accurate resuits can be estimated using an optimization method. The computer simulation results prove that the algorithm for the location of the near-fields is more accurate, effective and suitable for real-time applications.     

Two Models of DMFC under Effects of Cathode Humidification Temperature and Anode Flow Rate

This paper introduced a novel self-adjustment of parameters of fuzzy neural networks. Then, the effects of cathode humidification temperature and anode flow rate on the performance of direct methanol fuel celI（DMFC） were described respectively. Two dynamic performance models of DMFC under the influences of cathode humidification temperature and anode flow rate were established separately based on fuzzy neural networks. The simulation results show the accuracy of the models established is satisfactory.