TCP包状态检测系统的硬件设计与实现

提出了一种利用硬件实现的TCP包状态检测系统模型,与传统的状态检测系统的区别在于：1）提出established状态时的数据匹配,以防止包数据的攻击;2）利用哈希算法快速存放、查找信息的特点实现状态信息的存储和转换;3）采用时间地址循环超时管理策略来管理超时的连接。实验结果表明,该设计在能防止一些网络数据攻击的基础上快速准确地实现TCP状态转换功能。     

基于颗粒流的膨胀土路基破坏特征分析

研究目的:膨胀土具有强烈胀缩性,常处于非饱和状态,对水分状态的变化十分敏感,并由此引起膨胀土强度和体积的变化,往往造成工程建筑物的破坏。结合新建玉蒙线膨胀土路基的修筑,利用颗粒流离散元方法,对膨胀土的干湿胀缩效应从颗粒间强度变化及颗粒体积胀缩入手进行数值模拟,分析膨胀土路基在干湿胀缩循环下的破坏特征及过程。研究结论:颗粒流数值方法可以合理再现膨胀土的室内加压平衡法膨胀力测试实验及自由膨胀率测试实验;通过对膨胀土路基进行单次胀缩及多次胀缩模拟试验,可从细观角度揭示了膨胀土路基在胀缩循环下的浅表层塌滑现象;对比现场部分填筑中路基的破坏特征,表明数值模拟与现场情况基本吻合。     

单线铁路CTCS-2级列控系统设计应用研究

CTCS-2级列控系统主要应用于双线铁路,在单线铁路中尚无工程应用先例,为解决单线铁路CTCS-2级列控系统应用存在的问题,在符合现行规范、不修改列控车载设备的前提下提出CTCS-2级列控系统总体方案。通过单线铁路与双线铁路的差异性对比分析,结合CTCS-2级列控系统功能需求,对闭塞方式、轨道电路配置、应答器设置、临时限速管理等特殊技术问题进行了研究并提出了解决方案。研究表明:CTCS-2级列控系统应用于时速200～250 km单线铁路能够实现列车高速安全运行。     

香港典型山区道路汽车行驶工况污染物排放研究

通过安装车载测试系统收集香港港岛山区路段正常行驶工况下尾气中的CO、NOx、HC等污染物和油耗并辅助计算机软件进行分析。研究得出,山区道路设计、地形地貌和驾驶习惯对车辆油耗以及CO、NOx和HC排放有直接关系。可以通过坡道加宽、坡道延长、减少坡道红绿灯等措施减少车辆在山区道路行驶过程中速度变化频率,从而减少油耗以及CO、NOx和HC排放。     

Multi-objective optimization for asphalt pavement maintenance plans at project level: Integrating performance,cost and environment

Traditionally, asphalt pavement maintenance mainly considers pavement performance and cost and largely ignores the environment while substantial amount of environmental burdens are released in the process. In this study, a multi-objective optimization model was developed integrating the three elements in order to optimize the asphalt pavement maintenance plans at the project level. Pavement performance element was decided as the multiplier of pavement serviceability index and traffic volume. Cost element was represented by the net present value, including components of agency cost, vehicle operation cost and salvage value. Environmental element, integrating energy consumption, global warming potential, acidification potential and respiratory effects potential, was measured by the life cycle assessment model. A hypothetic asphalt pavement maintenance case study was conducted using the developed multi-objective optimization model and harvested 103 sets of feasible combinations of maintenance plans, each of which is non-dominated by the others. Trade-offs analysis was performed among the three objectives and visualized in both two- and three-dimension forms. It is found there is an opportunity of reducing the cost and environmental impacts to 80.3% and 77.8% and increasing the pavement performance to 146.6% compared to the base case. However, they are mutually compromised and cannot be reached simultaneously. The developed model reveals the quantitatively interactive relationship of the three objectives and helps optimize the asphalt pavement maintenance plans.     

基于PSO算法的地铁智能调线调坡系统开发与研究

为解决人工调线调坡费时费力、效率低下，且无有效评价指标评判方案优劣的现状问题，从分析线路平纵断面设计变量入手，依据规范相关规定制定约束条件，创新性地建立带有侵限容忍值惩罚项和合规性惩罚项的目标函数，提出一套基于粒子群优化算法，适用于矩形、马蹄形、圆形等多种隧道断面类型的地铁调线调坡数学分析模型，并以此开发地铁智能调线调坡系统。以长沙地铁4号线某区间右线隧道为例，对比人工设计和智能系统的调线调坡结果。由对比结果可知，智能系统在线路参数选择的合理性和改善侵限情况等方面均明显优于人工调线调坡，且具有可靠性和高效性。     

Variable speed limit control for severe non-recurrent freeway bottlenecks

Variable speed limit (VSL) schemes are developed based on the Kinematic Wave theory to increase discharge rates at severe freeway bottlenecks induced by non-recurrent road events such as incidents or work zones while smoothing speed transition. The main control principle is to restrict upstream demand (in free-flow) progressively to achieve three important objectives: (i) to provide gradual speed transition at the tail of an event-induced queue, (ii) to clear the queue around the bottleneck, and (iii) to discharge traffic at the stable maximum flow that can be sustained at the bottleneck without breakdown. These control objectives are accomplished without imposing overly restrictive speed limits. We further provide remedies for (a) underutilized bottleneck capacity due to underestimated stable maximum flow and (b) a re-emergent queue at the bottleneck due to an overestimated stable maximum flow. We analytically formulate the reductions in total delay in terms of control parameters to provide an insight into the system performance and sensitivity. The results from the parameter analysis suggest that significant delay savings can be realized with the proposed VSL control strategies.     

船舶智能设计浅析

随着《中国制造2025》提出综合实力进入世界制造强国前列的制造强国战略目标,基于新一代信息技术产业的智能制造工程正在各个产业迅速推进。但作为制造强国基础的智能工厂并不仅仅局限于智能制造,还应该包括智能设计、全范围的智能物流和智能管控等。其中智能设计是缩短产品研制周期的关键,通过智能设计产生最优化的数据、高正确率数据是缩减制造周期降低制造成本的关键。文章简要剖析智能设计在船舶行业的应用,基于现状展望智能设计的发展方向,并分析了发展智能设计所需的数据系统建设。     

基于轨道极限状态法的过渡板受力分析和配筋设计研究

京张高铁官厅水库特大桥为简支拱型大跨度钢桁梁桥,为防止梁端转角或错台量过大,降低梁端扣件系统受力,梁缝处设计采用了过渡板结构。为保证过渡板设计合理性和安全性,建立过渡板有限元实体模型进行受力分析,并首次运用轨道极限状态法对过渡板结构进行配筋设计。分析表明:(1)温度梯度作用对过渡板(420 mm厚)受力影响较大,在设计荷载中占据主导因素,在正温度梯度下,过渡板底部弯矩达到124.155 kN·m/m;(2)过渡板底部纵向弯矩在荷载基本组合作用下达到最大值,且实配配筋率最大,配筋时应注意以裂缝宽度为控制指标进行设计。