ROV—遥控潜水器数据传输系统

本文介绍了系缆遥控潜水器（ROV）数据传输系统的信息容量、速率和水中运动载体的时间响应；分析了半双工传输系统与时钟节拍；交替使用8位、12位模拟量数字转换，保证了ROV运动控制精度．在实行水面、水下信息通信的数据传输系统中，由于用绞线对替代了诸多导线，缩小了脐带电缆直径，减少了脐带电缆水中运动时受到的阻力，因而提高了系缆遥控潜水器操纵机动性和下潜深度．     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

县公路工程设计变更产生及控制

通过对县公路工程设计变更产生的原因分析，提出控制工程设计变更的措施。     

“撇缆活结”在船上的另类应用

随着船舶科技含量的提高,船上的船员不断精简。如何能在人员减少的情况下,完成原来高强度的工作,成为船员所面临的一个很现实的问题。扫舱工作就是一项高强度的工作,而且,这项工作需要多人一起完成。把“撇缆活结”应用到这一工作中,会大大减低工作强度,能在人员减少的情况下,很好地完成扫舱工作。     

基于模糊可靠性理论的高速线材轧辊优化设计研究

工作时受交变应力的作用,高速线材轧辊断裂问题时有发生.文章利用模糊可靠性理论,探讨在随机变量和模糊变量组合时轧辊的模糊可靠性设计方法.设计实例和生产实践证实了该方法具有优化设计的效果,使轧辊使用寿命显著提高.     

步进式同步装配线的改进

通过对传统的同步装配线与现代的非同步装配线的对比分析,结合自动装配的技术要求,对步进式同步装配线提出了改进方案。改进后的步进式同步装配线,既实现了自动装配的功能,又保持了步进式同步装配线的优点。     

重庆石板坡长江大桥复线桥总体设计

重庆石板坡长江大桥复线桥是主跨330 m的世界第一大跨径梁桥,大桥主跨跨中103m梁段采用了钢箱梁结构,这样有效地降低了主梁的弯矩和剪力,正是采取了这样的措施,才使得如此大跨径的桥梁在技术和造价上都切实可行。     

超灵便型多用途船舶的开发和设计

主要介绍了灵便型多用途船舶市场需求的趋势以及其设计理念。这一新理念的3万吨级多用途船被命名为"超灵便"型,4家中国船厂迄今收到了总共22艘该型船舶的订单,另有许多其他船舶公司表达了今后订购的意向。     

城轨首都国际机场线CBTC信号系统

结合工程项目实际，对首都国际机场线采用的CBTC（基于通信的列车控制）信号系统进行介绍。     

铁路客运专线相关技术研究

铁路客运专线技术新,标准高,工程庞大,系统复杂。经研究和论证,提出客运专线建设总体技术路线,分析了铁路客运专线在速度目标值、线路平纵段面、路基工程、桥梁工程、隧道工程、轨道工程、站场等方面的主要技术特点,并围绕无砟轨道和高速道岔设计理论等方面的关键技术开展研究。通过采用CFG桩、预应力管桩等设计和工程措施,控制路基沉降,建立路基沉降变形精测系统网,定期观测与评估。对桥梁基础沉降与梁的徐变,采取基础沉降控制、预应力混凝土梁徐变变形控制和区域沉降地区的桥梁沉降控制等措施。隧道施工采用台阶法、交叉中隔壁法和双侧壁导坑法,衬砌采用复合式衬砌或整体式衬砌。