基于多层动网格技术的流固耦合方法研究

从弱耦合的角度出发,对某型跨声速风扇叶片做了第一阶扭转振动模态下的流固耦合验证计算,采用三维线性插值方法,通过商用软件ANSYS和CFX实现了计算结构动力学和计算流体力学之间的数据交换,从而使固体域与流体域顺序祸合.应用多层动网格技术解决了固体域模型在流场中运动受到流体网格尺寸制约的问题.计算结果表明,模拟结果可以预估叶轮系统的模态气动阻尼系数,具有工程参考价值.     

Improving maritime inventory routing: application to a Brazilian petroleum case

The crude oil offloading and supply problem (COSP) is a type of operation maritime inventory routing (MIR) problem encountered by petroleum companies. In COSP, the company not only is responsible for the ship scheduling to carry the crude oil from production sites to discharge ports but also must maintain inventory levels at both ports (production and consumption) between safety operational bounds to avoid disruptions in its crude oil production and/or refining processes. We show how to improve significantly the decision-making process in a Brazilian petroleum company using a mixed-integer linear programming (MILP) model to represent COSP. Comparison tests with a current ship-scheduling method adopted in the company indicated that the use of the MILP model increased the transportation efficiency and reduced costs by 20% on average. In addition to the quantitative gains, the use of a MILP model to solve COSP has succeeded when encountering real-life events, such as variation in production or consumption rates, berth unavailability, and changes in the storage capacities at ports.     

Multi-objective optimization of quarter-car models with a passive or semi-active suspension system

A systematic methodology is applied in an effort to select optimum values for the suspension damping and stiffness parameters of two degrees of freedom quarter-car models, subjected to road excitation. First, models involving passive suspension dampers with constant or dual rate characteristics are considered. In addition, models with semi-active suspensions are also examined. Moreover, special emphasis is put in modeling possible temporary separations of the wheel from the ground. For all these models, appropriate methodologies are employed for capturing the motions of the vehicle resulting from passing with a constant horizontal speed over roads involving an isolated or a distributed geometric irregularity. The optimization process is based on three suitable performance criteria, related to ride comfort, suspension travel and road holding of the vehicle and yielding the most important suspension stiffness and damping parameters. As these criteria are conflicting, a suitable multi-objective optimization methodology is set up and applied. As a result, a series of diagrams with typical numerical results are presented and compared in both the corresponding objective spaces (in the form of classical Pareto fronts) and parameter spaces.     

设置纵隔板钢桥面双层铺装拉应力逼近式研究

以现行《公路工程技术标准》（JTGB01-2003）为依据，结合钢桥面铺装的几何特征、力学特性，建立设置纵隔板的钢桥面双层铺装拉应力三维有限元计算模型。在结构设计参数常用取值范围内，对设置纵隔板钢桥面双层铺装的拉应力关键影响因素进行正交敏感性分析：通过逐步线性回归方法拟和出钢桥面双层铺装拉应力的近似计算公式，使得铺装层车载响应隐含式显示化：同时，通过有限元计算和回归拟舍分析，对标准单轴双轮轴载作用下拉应力的计算公式进行修正，得单轴双轮组各级轴载作用下钢桥面双层铺装拉应力的计算通式，其精度很好，能满足工程设计和理论研究的需要。研究结果可为钢桥面双层铺装结构设计提供近似计算的新方法，     

不对称边跨预应力混凝土连续梁桥施工监控

该文介绍了312国道常州段新武宜运河大桥不对称边跨预应力混凝土连续箱梁施工监控的关键技术,论述了施工监控的目的与意义,阐明了线形控制及应力监测的要求、技术措施等。     

国际平整度指数二元曲面函数描述模型的研究

通过建立国际平整度指数(IR I)的数字地面模型来描述基于道路面状的IRI指标概念。在分析研究几类数字地面模型的曲面函数内插方法的基础上,给出了IRI的二元双一次曲面乘积型逼近模型。最后给出了定义和描述同一段道路路面不同时段IRI变化量的乘积型重积分求积公式、IRI均值和标准差、IRI值的变化差均值及IRI值变化差的标准差、IRI值单位时间变化速率等数值解法。     

用于车道识别的分段切换车道模型

为了使得车道模型既能准确地描述车道形状,又不影响车道识别算法的实时性,提出了一种分段切换车道模型。对近视场区域使用直线模型匹配车道线,对远视场区域则在直线模型和二次曲线模型之间进行切换,以适应有曲率和无曲率道路的识别要求。试验表明,使用分段切换车道模型的车道识别算法能够很好地匹配各种形状道路,并能满足实时性要求。     

Tractor-semitrailer model for vehicles carrying liquids

This article presents a model for solving solid-fluid interactions in vehicles carrying liquids. A tractor-semitrailer model is developed by incorporating suspension systems and tire dynamics. Owing to the solid-fluid interaction, equations of motion for the vehicle system are coupled. To simplify the complicated solution procedure, the coupled equations are solved separately using two different codes. Each code is analyzed separately; but as the parameters of the two codes depend on each other, the codes must be connected at the end of each time step. To determine the dynamic behavior of the system, different braking moments are applied. As the braking moments increase, braking time decreases. However, it turns out that increasing the braking moment to more than a certain level produces no significant results. It is also shown that vehicles carrying fluids need a greater amount of braking moments in comparison to vehicles carrying solids during braking. In addition, as the level of the fluid inside the tanker increases, from one-third to two-third of the tanker's volume, the sloshing forces applied to the tanker's walls increase. It was also concluded that the strategy used in this article to solve for the solid-fluid interaction by incorporating vehicle dynamic effects represents an effective method for determining the dynamic behavior of vehicles carrying fluids in other critical maneuvers.     

动态分段技术在路面管理系统中的应用

动态分段技术是一项新的线性特征的存储、显示和分析技术,已经开始应用于路面管理系统。该文介绍了动态分段技术中的基本概念及其基本原理,分析了路面管理系统中动态分段的数据结构并结合实例介绍了其在该系统中的应用。     

数字电子调速器的设计与应用

数字电子调速器是实现直列柱塞泵柴油机电子控制的有效方案.介绍了利用线性比例电磁铁作为执行器,以Mortorola的MC9S12DP256 MCU为主控芯片,在CodeWarrier集成开发环境下开发了相应的控制程序,实现了柴油机的数字调速,并应用于LR6105Q柴油机.测试结果表明,发动机稳态调速率小于2.5%,符合各类常规设备动力的调速要求;发动机的两级调速转矩特性符合车辆的动力特性要求.