Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

遥感在新建中吉乌国际铁路中国境内段可行性研究中的应用

采用 TM卫星图像在可行性研究阶段对地质复杂地区进行判释评价是一种行之有效的方法。本文对工作区的构造单元、地层岩性、不良地质进行了判释 ,并根据影像特征对工程地质条件、区域稳定性进行了定性评价。     

Multi-objective optimization of quarter-car models with a passive or semi-active suspension system

A systematic methodology is applied in an effort to select optimum values for the suspension damping and stiffness parameters of two degrees of freedom quarter-car models, subjected to road excitation. First, models involving passive suspension dampers with constant or dual rate characteristics are considered. In addition, models with semi-active suspensions are also examined. Moreover, special emphasis is put in modeling possible temporary separations of the wheel from the ground. For all these models, appropriate methodologies are employed for capturing the motions of the vehicle resulting from passing with a constant horizontal speed over roads involving an isolated or a distributed geometric irregularity. The optimization process is based on three suitable performance criteria, related to ride comfort, suspension travel and road holding of the vehicle and yielding the most important suspension stiffness and damping parameters. As these criteria are conflicting, a suitable multi-objective optimization methodology is set up and applied. As a result, a series of diagrams with typical numerical results are presented and compared in both the corresponding objective spaces (in the form of classical Pareto fronts) and parameter spaces.     

公路土石方调配优化数学模型的建立和程序设计

线性规划运输平衡问题数学模型应用于公路土石方调配，综合考虑借，弃方单价及和纵向调配运价，以最小费用为目标函数，调配方量为决策变量，调配单位（元／m^3）为价值系数，编制程序完成实现最小费用的优化调配方案，并根据需要统计输各项表格。     

基于航迹偏差角和航向差的自航模运动轨迹控制方法研究

针对水面自航模运动轨迹传统控制方法的缺点,提出用航迹偏差角代替航迹偏差、航向差代替偏航角速度为输入变量的模糊控制方法。通过实船试验,与传统控制方法相比,改进后的控制方法操控性更强、轨迹波动更小。     

一种离散GM(1,1)模型的研究

分析了离散GM(1,1)模型与原始GM(1,1)模型的关系,二者形式相同,建模机理相同,但建模过程不完全相同,所以二者的时间响应函数不同。解释了离散GM(1,1)模型比原始GM(1,1)模型优越的原因,并从理论上证明了该离散GM(1,1)模型不仅具有白化指数律、白化系数律重合性,而且具有线性变换一致性。     

压燃式自由活塞直线发电机参数匹配设计与工作过程仿真

根据自由活塞发动机和直线电机之间存在的能量守恒关系,利用所选择的商用直线电机进行压燃式自由活塞发动机的参数匹配设计.通过分析得到直线电机与自由活塞发动机主要结构参数之间的关系,再对系统的工作过程、自由活塞发动机的换气和燃烧过程进行CFD仿真,反复进行迭代计算,确定压燃式自由活塞发动机的具体几何结构参数.从参数匹配关系式...     

带形城市轨道交通TOD模式研究

带形城市由于其特殊的自然地理环境,城市空间布局及发展受限,城市用地与交通之间的矛盾尖锐,市区交通拥堵问题严重,成为城市发展的瓶颈。为解决当前带形城市交通发展难题,应当在带形城市规划建设中引入以城市轨道交通引导的TOD发展模式,制定城市发展主轴,以城轨站点为中心开发周边土地,建设良好市区环境,有效拓展城市规模。城轨交通TOD模式能以自身优势破除城市交通发展难题,改善城市结构布局,为调整市区土地结构提供机遇,是带形城市轨道交通可持续发展的有效途径。以兰州市轨道交通2号线为例,结合TOD理论,提出规划意见和建议。