Subsidy and public transit performance: A factor analytic approach

The need to measure and evaluate transit system performance has led to the development of numerous performance indicators. However, depending upon the indicator, we oftentimes reach different conclusions regarding transit system performance. The research reported in this paper uses factor analytic methods to generate a set of underlying attributes (factors) that capture the performance of public transit systems in Indiana. Similar to what is reported in the literature, this study finds three attributes that best describe transit system performance: efficiency, effectiveness, and overall performance. Based upon systemsÕ factor scores, the study finds that systems scoring highly on one attribute generally perform well on the remaining attributes. Further, there is an inverse relationship between system performance and subsidies, a finding that supports performance based subsidy allocations.     

Real time queue length estimation for signalized intersections using travel times from mobile sensors

We study how to estimate real time queue lengths at signalized intersections using intersection travel times collected from mobile traffic sensors. The estimation is based on the observation that critical pattern changes of intersection travel times or delays, such as the discontinuities (i.e., sudden and dramatic increases in travel times) and non-smoothness (i.e., changes of slopes of travel times), indicate signal timing or queue length changes. By detecting these critical points in intersection travel times or delays, the real time queue length can be re-constructed. We first introduce the concept of Queue Rear No-delay Arrival Time which is related to the non-smoothness of queuing delay patterns and queue length changes. We then show how measured intersection travel times from mobile sensors can be processed to generate sample vehicle queuing delays. Under the uniform arrival assumption, the queuing delays reduce linearly within a cycle. The delay pattern can be estimated by a linear fitting method using sample queuing delays. Queue Rear No-delay Arrival Time can then be obtained from the delay pattern, and be used to estimate the maximum and minimum queue lengths of a cycle, based on which the real-time queue length curve can also be constructed. The model and algorithm are tested in a field experiment and in simulation.     

聚羧酸系高性能减水剂在客运专线预制梁中的应用

文章以南钦铁路南宁段良庆制梁场工程为依托,结合混凝土配合比设计技术条件、参数及混凝土配合比和性能,介绍了在现场预制梁中使用聚羧酸系高性能减水剂的应用效果。     

干线公路高模量沥青混凝土应用研究

文章试验研究了不同PR/RA改性剂掺量的高模量沥青混凝土(HMAC)的抗车辙性能,分析了层位、层厚、模量、轴载、温度和荷载次数等因素对高模量沥青混凝土路面抗车辙性能的影响程度,提出了合理的路面层位设置、模量取值范围及路面结构组合,并通过某干线公路试验路段,验证了高模量沥青混凝土的抗车辙效果。     

Multi-objective optimization for asphalt pavement maintenance plans at project level: Integrating performance,cost and environment

Traditionally, asphalt pavement maintenance mainly considers pavement performance and cost and largely ignores the environment while substantial amount of environmental burdens are released in the process. In this study, a multi-objective optimization model was developed integrating the three elements in order to optimize the asphalt pavement maintenance plans at the project level. Pavement performance element was decided as the multiplier of pavement serviceability index and traffic volume. Cost element was represented by the net present value, including components of agency cost, vehicle operation cost and salvage value. Environmental element, integrating energy consumption, global warming potential, acidification potential and respiratory effects potential, was measured by the life cycle assessment model. A hypothetic asphalt pavement maintenance case study was conducted using the developed multi-objective optimization model and harvested 103 sets of feasible combinations of maintenance plans, each of which is non-dominated by the others. Trade-offs analysis was performed among the three objectives and visualized in both two- and three-dimension forms. It is found there is an opportunity of reducing the cost and environmental impacts to 80.3% and 77.8% and increasing the pavement performance to 146.6% compared to the base case. However, they are mutually compromised and cannot be reached simultaneously. The developed model reveals the quantitatively interactive relationship of the three objectives and helps optimize the asphalt pavement maintenance plans.     

六宜路底面层沥青混合料组成优化设计分析

底面层是沥青路面结构层中承上启下的重要层位,文章结合六宜路沥青路面施工实例,以骨架密实型为目标对底面层沥青混合料配合比进行了优化设计分析,并通过室内试验与施工质量检测,验证了生产配合比优化后的沥青混合料的路用性能与施工质量。     

Cooperation in transit delivery in West German metropolitan areas

West Germany is densely populated, averaging 245 inhabitants/km², but varying widely between urban agglomerations and rural areas. Transport volume has increased by 40% since 1970, with virtually all growth due to private automobiles. Since 1981 public transit has been suffering from decreasing demand.A 1964 Expert's Report to the German federal government was the stimulus for initiating an effective funding mechanism for new public transit construction. In 1965 Germany's first federated transit authority was founded for the region of Hamburg.Principal among the goals of any cooperative agreement among transit companies are improvements for the passengers and improvement of revenues for the companies. To attain these ends, two distinct forms of transit aggrements have been developed in Germany: transit cooperative (Verkehrsgemeinschaft) and transit federation (Verkehrsverbund). The former is more suitable for smaller to medium-sized towns, while the latter is more suitable for larger cities. The two types are described in this article.German transit federations during the 1970s succeeded in significantly increasing ridership, while during the 1980s patronage has either remained steady or has declined. Yet transit federations showed much better perfomance than did public transit in general. In terms of costs and revenues, no public transit organization in Germany is able to break even; deficits vary between 42% and 55%. The author concludes, however, that hidden subsidies for automobile traffic are far higher, because of environmental damage and the high social cost of traffic accidents.     

十字交叉吊杆拱桥支座更换顶升方案研究

对某钢管混凝土十字交叉吊杆拱桥支座更换顶升方案进行分析研究,采用有限元软件分析并探讨主梁与梯道梁相接处的钢板连接、主梁与主拱相交处的橡胶圈、单点顶升与多点顶升、顶升位置、附加支撑以及顶升最大高度对拱梁受力性能的影响,得出相应结论及建议,为同类型桥梁施工提供借鉴。     

旋转式防撞护栏安全性能典型特征分析

分析旋转式防撞护栏的典型防护机理,进行实车碰撞试验检验,将结果与其他护栏的碰撞试验结果进行对比,揭示其典型安全性能特征,研究结果可为工程项目护栏设计提供参考.     

12m前置出口客车JS6120GC底盘设计

介绍12m前置出口客车JS6120GC底盘的布置、性能参数及结构特点,分析和解决设计中遇到的问题。