重载铁路牵引供电方案与接触网载流能力的分析

针对重载铁路以及交流传动机车的特点,对新建重载铁路牵引供电方案与接触网载流能力的关系进行了细致的分析,逐步深入的介绍了重载铁路牵引供电方案设计的几个关键步骤,以及详细的计算方法,并提出了设计中应注意的问题。     

HXD2型大功率交流传动货运电力机车牵引电传动系统

介绍HXD2型大功率交流传动货运电力机车牵引电传动系统的电气原理、技术参数、性能特点和结构组成,对牵引电传动系统的各关键部件和装置组成进行了详细的功能描述。     

准高速电力机车牵引齿轮优化设计

在对国内外机车牵引齿轮现状进行深入调查的基础上，提出了从优选材料及热处理工艺、进行齿形和参数优化设计、合理选择制造精度与工艺，优选润滑剂与润滑密度方式，改善动力学性能等五个方面提高我国准高速电力机车牵引齿轮动承载寿命的具体措施，其中在齿形和参数优化方面，设计了优选 角并能使齿根危险断面齿厚尽可能大，而应主 磨前滚刀，优选出能使啮合过程中最大闪温值为最小的变位系数，并在此了考虑机车启动、持续与高速运     

牵引电机外锥传动转轴机械加工工艺优化

文章分析牵引电机转轴采用传统多机床加工工艺存在的不足,详细介绍改进工艺手段和工艺方法、优化工艺参数等,极大地提高了转轴的加工质量和生产效率。     

牵引模式对C0-C0架悬式机车粘着性能的影响

分析了牵引模式对C0-C0架悬式机车粘着性能的影响.通过对牵引装置不同布置方式进行比较,指出机车的轴重转移量以车体中央截面成对称分布,对应轮对上的粘着质量利用率之和为定值;并提出牵引点高度对机车粘着性能影响较大,而牵引装置布置方式对其影响较小,机车设计时需根据悬挂特性选择合适的牵引点高度.     

Dynamics of railway wagons subjected to braking torques on defective tracks

It is well known that track defects cause profound effects to the dynamics of railway wagons; normally such problems are examined for cases of wagons running at a constant speed. Brake/traction torques affect the speed profile due to the wheel–rail contact characteristics but most of the wagon–track interaction models do not explicitly consider them in simulation. The authors have recently published a model for the dynamics of wagons subject to braking/traction torques on a perfect track by explicitly considering the pitch degree of freedom for wheelsets. The model is extended for cases of lateral and vertical track geometry defects and worn railhead and wheel profiles. This paper presents the results of the analyses carried out using the model extended to the dynamics of wagons containing less ideal wheel profiles running on tracks with geometry defects and worn rails.     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives

In this study, in order to examine the effects of a wheelset driving system suspension parameters on the re-adhesion performance of locomotives, the stick–slip vibration was analysed according to theoretical and simulation analysis. The decrease of the slip rate vibration amplitude improved the stability of the stick–slip vibration and the re-adhesion performance of locomotives. Increasing the longitudinal guide stiffness of the wheelset and the motor suspension stiffness were proposed as effective measures to improve the re-adhesion performance of locomotives. These results showed that the dynamic slip rate was inversely proportional to the series result of the square root of the longitudinal guide and motor suspension stiffness. The larger the motor suspension stiffness was, the smaller the required longitudinal guidance stiffness was at the same re-adhesion time once the wheel slip occurred, and vice versa. The simulation results proved that the re-adhesion time of the locomotive was approximately proportional to amplitude of the dynamic slip rate. When the stick–slip vibration occurred, the rotary and the longitudinal vibrations of the wheelset were coupled, which was confirmed by train's field tests.     

Coupler jackknifing and derailments of locomotives on tangent track

A number of derailments occurred in recent years due to coupler jackknifing, some of them were reported on tangent tracks where conventionally thought to be the safer sections. This article studied coupler jackknifing behaviour and its implications for locomotive safety on tangent tracks from the experience of China heavy haul. Three types of coupler systems were modelled and simulated regarding coupler jackknifing behaviour. Two typical locomotive derailments occurred on tangent tracks were analysed. From the derailment experience, coupler angle self-lock behaviour was introduced and simulated. An approach to determine coupler angles in the jackknifed position was derived and validated with a self-coded program and SIMPACK. Methods to prevent coupler jackknifing were also evaluated with regard to locomotive stability.     

适用于中亚铁路的机车转向架设计

本文摘要介绍了中亚铁路的现状,提出了机车型谱平台搭建的概念,介绍了适用于中亚铁路的机车转向架的设计思路和结构特点。