凌志LS400轿车电子点火系统的原理与检修

介绍凌志LS400轿车电子点火系统的组成、结构、工作原理以及点火系统常见故障的检修方法。     

一种适合于汽车性能测试的加速度传感器

本文介绍微型集成加顺的原理，结构，伺服电路组成和基本性能，说明了它的典型应用，特别指出它在汽车性能测试中的广阔应用前景。     

磁导航车体运动数字控制系统数学模型研究

探讨磁导航车体运动数字控制系统的数学模型。用实验方法建立磁导航车体运动数字控制系统典型环节的时间连续数学模型,结合车体运动机械操纵环节的传统数学模型建立整个控制系统的时间连续数学模型。利用Z变换方法把控制系统时间连续数学模型转换成离散数学模型,引入数字控制系统典型环节的数学模型,建立磁导航车体运动数字控制系统的离散数学模型。设计数字控制系统的二次型最优控制器并进行计算机仿真。仿真分析结果验证了数学模型的有效性。     

光纤光栅孔隙水压力计的研制与应用研究

阐述了光纤Bragg光栅(FBG)技术的原理以及传感器的结构设计原理和方法,采用光纤Bragg光栅(FBG)传感技术研制了适合岩土工程使用的光纤光栅孔隙水压力计,对研制的6支光纤光栅孔隙水压力计进行了试验检验并埋设于某高速公路软土路基中试测孔隙水压力以检验研发成果。实践结果表明该仪器克服了常规仪器的某些缺点,并有稳定性好、耐腐蚀等优点,可以较好地应用于岩土工程监测当中。本仪器的研制对于光纤传感技术在岩土工程领域的应用具有积极的推动作用。     

格拉斯磁环匀强磁场分析

以毕奥-萨伐尔定律为基础,建立亥姆霍兹线圈以及格拉斯磁环中心磁场分布模型,并计算了它们内部的轴向磁感应强度分布,绘出了空间分布图,分析了轴向磁感应强度与x、y坐标的关系,分析结果得到了亥姆霍兹线圈和格拉斯磁环内部匀强磁场分布区域,通过比较得到格拉斯磁环内部的匀强磁场区域比亥姆霍兹线圈内部的匀强磁场分布区域更大的结论。     

A generic data assimilation framework for vehicle trajectory reconstruction on signalized urban arterials using particle filters

With trajectory data, a complete microscopic and macroscopic picture of traffic flow operations can be obtained. However, trajectory data are difficult to observe over large spatiotemporal regions—particularly in urban contexts—due to practical, technical and financial constraints. The next best thing is to estimate plausible trajectories from whatever data are available. This paper presents a generic data assimilation framework to reconstruct such plausible trajectories on signalized urban arterials using microscopic traffic flow models and data from loops (individual vehicle passages and thus vehicle counts); traffic control data; and (sparse) travel time measurements from whatever source available. The key problem we address is that loops suffer from miss- and over-counts, which result in unbounded errors in vehicle accumulations, rendering trajectory reconstruction highly problematic. Our framework solves this problem in two ways. First, we correct the systematic error in vehicle accumulation by fusing the counts with sparsely available travel times. Second, the proposed framework uses particle filtering and an innovative hierarchical resampling scheme, which effectively integrates over the remaining error distribution, resulting in plausible trajectories. The proposed data assimilation framework is tested and validated using simulated data. Experiments and an extensive sensitivity analysis show that the proposed method is robust to errors both in the model and in the measurements, and provides good estimations for vehicle accumulation and vehicle trajectories with moderate sensor quality. The framework does not impose restrictions on the type of microscopic models used and can be naturally extended to include and estimate additional trajectory attributes such as destination and path, given data are available for assimilation.     

一种商用车铅酸蓄电池状态监控系统的开发

本文介绍一种商用车铅酸蓄电池状态监控系统的开发,系统实现蓄电池传感器实时采集蓄电池状态参数信息,并通过TBOX将数据上传至后台服务器,进行数据存储分析及报警判断,并将亏电报警信息推送给手机客户端,提醒用户注意。同时,系统根据蓄电池SOC值的限值判断,进行电磁开关的切断控制,以保证车辆的正常起动。     

Plate scanning tools to obtain travel times in traffic networks

The management of vehicle travel times has been shown to be fundamental to traffic network analysis. To collect travel time measurement, some methods focus solely on isolated links or highway segments, and where two measurement points, at the beginning and at the end of a section, are deemed sufficient to evaluate users' travel time. However, in many cases, transport studies involve networks in which the problem is more complex. This article takes advantage of the plate scanning technique to propose an algorithm that minimizes the required number of registering devices and their location in order to identify vehicles candidates to compute the travel times of a given set of routes (or subroutes). The merits of the proposed method are explained using simple examples and are illustrated by its application to the real network of Ciudad Real.     

Travel time estimation oriented freeway sensor placement problem considering sensor failure

Optimal sensor placement on freeway corridor is of great interest to transportation authorities. However, current traffic sensors are easily subject to various failures. Therefore, it is necessary to incorporate sensor failure into the optimal sensor placement model. In this article, a two-stage stochastic model is proposed for the purpose of travel time estimation on freeway corridor. To balance the effectiveness and reliability, a stochastic conditional value at risk (CVaR) model is also proposed. Since both models are too complicated, a customized genetic algorithm is developed. Numerical experiments show that considering sensor failure makes a significant performance improvement in the sensor placement pattern. Sensitivity analysis is also applied to investigate the impact of a number of allowable sensors and different traffic sensor failure probability.     

磁力摩擦式辅助驱动在TBM连续皮带机中的应用

长大隧道TBM(tunnel boring machine)施工大多采用连续皮带机出渣,当运输距离较大时通常需要在中间增设辅助驱动,以降低胶带最大张力,从而降低胶带强度。为了提高辅助驱动的工程适应性,研发了磁力摩擦式辅助驱动系统,具有驱动力大、无二次转载、胶带无二次冲击损伤、结构简单、故障点少、结构紧凑占用空间小、安装方便和配置灵活等特点。该成果可用于采用钢丝绳芯胶带的TBM连续皮带机、支洞皮带机以及其他需要辅助驱动的胶带输送机,并在山西省中部引黄工程TBM1标段成功应用,具有广阔的推广应用价值。