汽车弯道制动试验响应分析

汽车弯道制动是一种危险而复杂的工况，其复杂性表现在影响因素多和评价方法两方面。文中通过试验，分析了影响汽车弯道制动性能的主要因素。从试验结果来看，用稳定性和偏移量两个评价指标，可以较全面评价汽车弯道制动性能。     

船舶气囊下水工艺实践与发展前景

本文叙述船舶气囊下水新工艺在我国内河中、小型船厂近年来的实践，提出和总结气囊下水工艺有关计算方法和注意事项。鉴于气囊下水新工艺有其独特的优越性，并随着气囊制造质量和下水工艺不断完善提高，气囊下水新工艺必会有较好的发展前景，下水船舶重量期望可提高到2000t。     

发动机电控节气门控制器的研发

采用电控节气门配合发动机ECU工作,可以调节发动机扭矩输出,根据不同工况变化动态调整加速踏板到节气门的传递函数,有效降低油耗和排放,优化驾驶性能。同时,在混合动力电动汽车上,它作为可量化控制发动机扭矩输出的有效途径,在动力总成控制中起相当重要的作用。本文研究了电控节气门的结构和驱动原理,设计了控制硬件和软件,开发完成了一种发动机电控节气门控制器。对其控制效果进行了测试,并和Bosch的控制效果进行了对比,另外,将控制器安装于发动机上,进行了台架试验。试验证明,使用该控制器可以实现对发动机扭矩输出的控制。该控制器已经应用于研究阶段中的混合动力电动汽车车用发动机的扭矩控制中。     

车辆-轨道耦合动力学理论在现代机车车辆设计中的应用实践

介绍了车辆 轨道耦合动力学理论在新型机车车辆研制中的最新应用情况,包括在200km/h"天梭号"高速机车设计、170km/hSS7E型提速客运电力机车改进设计,以及120km/h提速货运电力机车研制中的应用实践。文章着重从提高高速机车蛇行运动稳定性、改进SS7E型客运机车横向动力性能以及降低提速货运机车轮轨动力作用等方面进行了详细论述。结果表明,车辆 轨道耦合动力学理论在现代铁路机车车辆研制中取得了显著成效,具有广阔的应用前景。     

A study of the environmental impacts of intelligent automated vehicle control at intersections via V2V and V2I communications

This article presents a novel intersection traffic management system for automated vehicles and quantifies its impact on fuel consumption and greenhouse gas emissions of CO₂ relative to traditional traffic signal and roundabout intersection control. The developed intelligent traffic management (ITM) techniques, which are based on a spatiotemporal reservation scheme, ensure that vehicles proceed through the intersection without colliding with other vehicles while at the same time reducing the intersection delay and environmental impacts. Specifically, the spatiotemporal reservation scheme provides each vehicle a collision-free path that is decomposed into a speed profile along with navigational instructions. The integration of the developed microscopic traffic simulator with instantaneous emission model, provides improved assessments of the environmental impact of traffic control strategies at intersections. The simulator architecture integrates several ITM algorithms, vehicle sensors, V2V/V2I communications, and emission and fuel consumption models. Each vehicle is modeled by an agent and each agent provides information depending on the specific vehicle sensors. The ITM system is supported by V2V and V2I communications, allowing the exchange of information among vehicles and infrastructure. The data include the estimated vehicle position and speed. Compared with traditional traffic management techniques, the simulation results prove that the proposed ITM system reduces CO₂ emissions significantly. The research also shows that these reductions are more significant when the traffic flow increases.     

基于神经网络的无人无缆水下机器人运动建模与控制技术研究

对自主型水下机器人（ＡＵＶ）神经网络运动模型的结构进行了理论分析和探讨,提出了非完全回归型神经网络、增加积分层的输出层结构及相应的分步式学习方法。对ＡＵＶ运动过程中目标运动路径和目标运动速度的同时跟踪控制进行了系统研究。提出了由主控网络和伴随网络构成的神经网络控制器结构,给出了通过计算机模拟来生成教师样本的方法,提出了预测控制的思想。计算机仿真及水下机器人“Ｔｗｉｎ－Ｂｕｒｇｅｒ”的水池实验结果验证了本文所提出的建模方法和跟踪控制方法的有效性和可行性。     

Optimizing the locations of electric taxi charging stations: A spatial–temporal demand coverage approach

Vehicle electrification is a promising approach towards attaining green transportation. However, the absence of charging stations limits the penetration of electric vehicles. Current approaches for optimizing the locations of charging stations suffer from challenges associated with spatial–temporal dynamic travel demands and the lengthy period required for the charging process. The present article uses the electric taxi (ET) as an example to develop a spatial–temporal demand coverage approach for optimizing the placement of ET charging stations in the space–time context. To this end, public taxi demands with spatial and temporal attributes are extracted from massive taxi GPS data. The cyclical interactions between taxi demands, ETs, and charging stations are modeled with a spatial–temporal path tool. A location model is developed to maximize the level of ET service on the road network and the level of charging service at the stations under spatial and temporal constraints such as the ET range, the charging time, and the capacity of charging stations. The reduced carbon emission generated by used ETs with located charging stations is also evaluated. An experiment conducted in Shenzhen, China demonstrates that the proposed approach not only exhibits good performance in determining ET charging station locations by considering temporal attributes, but also achieves a high quality trade-off between the levels of ET service and charging service. The proposed approach and obtained results help the decision-making of urban ET charging station siting.     

车辆侧翻的运动力学分析及预防措施

车辆转弯发生侧翻是最常见、最严重的交通事故之一。对车辆转弯的4种运动状态进行了力学分析，对“车轮下的奇迹”进行科学的压力测算，提出了防止车辆侧翻的具体措施。     

丰田燃料电池汽车Mirai技术分析

燃料电池汽车因具有零排放、续驶里程长、燃料加注快和噪声低等优势,引起了国内外汽车产商的广泛关注,将燃料电池新能源汽车作为研发的重点,并推出了一些量产的燃料电池汽车。基于丰田Mirai燃料电池汽车,对其技术原理和核心总成部件进行了综述分析,并对燃料电池汽车的发展方向和关键技术问题进行了思考和建议,为读者提供了有益的参考和借鉴。     

纯电动汽车动力电池降温性能研究

为了更好地优化纯电动汽车动力电池系统的加热策略,以磷酸铁锂电池包为研究对象,测试其在3种不同环境温度下的电池降温性能,结合实际环境的影响,建立电池降温速率计算模型并通过测试验证。