铁路旅客旅行换乘方案优选算法

为给铁路旅客选择合理的旅行方案提供参考,以旅行目标值与换乘目标值之和最小作为目标函数值,考虑旅客从起点站出发、最终到达终到站、在中转站进出平衡的约束条件,建立旅客旅行换乘方案选择问题的数学模型。分别给出旅行时间、换乘次数、票价、距离、到发时刻和综合指数6种目标权值的确定方法,提出最短路法和列车匹配法2种求解方法。最短路法是通过构造并简化旅客运输网络,求出网络上若干条次短路,再根据各条次短路上列车的接续,构造列车换乘方案网络图,根据该网络的目标权值确定最短路,得到最优换乘方案。列车匹配法是根据列车运行图信息直接搜索发、到站的接续列车集合,求其两列车对应的重合停车站,根据重合停车站集合的情况选择迭代步数,剔除显然不利方案,构成换乘方案,根据方案的权值进行比选,得到最优换乘方案。对2种算法均用C#编程实现,并用现有的全路客票数据进行检算。计算结果表明:2种算法均能得到最优换乘方案;列车匹配法所用计算时间比最短路法少160 ms。     

A practical assessment of stated preferences methods

Stated preferences data in the form of rankings, ratings and choices were collected in Santiago and discrete choice models estimated with them. The models were compared in terms of accuracy v/s the cost of obtaining the information and models. All methods produced reasonable but different models and fairly close subjective values of time. In terms of production costs the ranking method was a clear looser although the experimental design was slightly biased against it. Finally, the use of computerised interviews is highly recommended particularly for dealing with low income people.     

建立整数型轨道状态最优综合维修计划模型

为实现高效的轨道不平顺养护维修,建立最优养护维修计划模型和采用大型养路机械进行作业是十分重要的。本文以养护维修时间为决策变量,以年度轨道不平顺平均值最小为目标函数,在考虑了一系列约束函数的情况下,建立了整数型轨道状态最优综合维修计划模型。该模型能有效利用现场的养护资源,从安全和舒适的角度出发来制定养护计划,该模型的建立从理论上解决了轨道不平顺状态计算机辅助决策系统的关键问题。     

PMM tests in a circulating water channel and nonlinear analysis

As a result of frequent marine disasters leading to the loss of human life and pollution of vast areas of the ocean, ship manoeuvrability has become a very important characteristic of ship design. Among several recent experimental techniques to determine ship manoeuvrability, the most popular is captive model testing using a planar motion mechanism (PMM). This article describes some tests, analyses, and results of PMM tests in a circulating water channel (CWC) using a model of a training ship. The hydrodynamic forces and moments acting on a model of the training ship Shioji Maru in pure yawing motion were measured, and hydrodynamic derivatives were obtained using two different methods of analysis: singular value decomposition (a least-squares fit method) and Fourier analysis. Derivatives obtained from the tests were used to simulate the turning trajectory of the actual ship, and these were compared with the results of sea trials. The results indicate that both methods of analysis yield fairly similar derivatives. The simulation results were also found to be a close match with the trial results. Received: February 7, 2002 / Accepted: May 14, 2002 Address correspondence to: K. Shoji (shoji@ipc.tosho-u.ac.jp)     

世界银行贷款项目“卫津路拓宽工程”的经济效益计算

本市以天津城市主干道卫津路拓宽改造工程为例，论述城市道路经济效益计算方法。按全天高峰小时、非高峰小时，分别计算机动车和非机动车的运营成本、时间价值及事故费用，采用有、无项目对比法．进行经济效益计算。经济效益中以车辆行程时间延误与路口时间延误的节约作为主要效益。     

一种简单环网供电方案的研究

本文介绍了一种设备简单、投资低、工程量小、施工周期短、自动化程度高的简单环网供电方案及相应的配网自动化系统;具体分析了配网自动化系统的可靠性、短路保护及自动装置功能及简单环网供电支援方案,阐述了该方案对运营的影响、设备的国产化和工程的可实施性。     

自动船用天线匹配调节器设计关键技术

根据船用自动天线匹配调节器的功能要求,提出了国产化自动天线匹配调节器硬件设计方案。采用了测载波半周期计数值、求4次平均值计算误差累加和、快速的匹配算法、合理设定分频系数和存储容量等方法,解决了提高测频精确性、Π型电容电感匹配网络的自动调整算法、提高自动调整速度、网络参数存储等关键技术。该技术已被运用到国产自动天线匹配调节器产品中,其实际匹配效果、调整时间等性能指标均不低于同类进口机型。     

WABCO电子控制空气悬架系统的应用技术

主要介绍电子控制空气悬架的工作原理和组成结构，阐述其主要零部件在整车上的匹配设计、系统参数的客户化设置和系统标定方法，为整车设计人员和系统的广泛推广提供技术依据。     

极线约束下的多分辨率相关匹配算法

针对计算机视觉在几何测量应用中图像匹配特点,提出了将多分辨率和极线约束与相关法相结合的图像匹配方法。该方法采用金字塔分层和极线约束来弥补相关匹配带来运算量大的不足,克服了图像匹配中精度低的缺点。通过计算机视觉在几何测量检测系统中图像匹配的实际应用,验证了该算法具有较高的测量精度、速度及其实用性。     

钢筋混凝土桥柱新配筋方式研究

该文结合轴心抗压试验,介绍了钢筋混凝土桥柱的配筋方式,可供类似结构设计借鉴参考。