多方式多类型交通分配模型(MMA)在收费型公路网中的应用研究

在对收费型公路运营模式进行研究的基础上,利用交通规划软件建立了基于广义费用的交通流量分配模型即多方式多类型交通分配模型,通过对模型参数的科学标定和网络的合理设置,得到各类车型在特定网络上的流量分配、路段饱和率以及通行费用,并对此模型的应用效果进行分析,最终为区域高速公路网规划、路段交通量预测提供依据。     

高速公路合理收费标准确定方法研究

随着投入运营的时间增加,高速公路运营管理中的矛盾日益突出,如何确定科学合理的道路收费率,成为道路经营者普遍关注的问题。在收费标准基本模型的基础上提出了收费标准方案评估模型,利用判断矩阵选择最佳方案,并制定了相应的收费标准的动态调整方法。     

橡胶粉改性MAC沥青混合料路用性能的研究

主要讨论了橡胶粉在MAC沥青混合料中的应用,研究了橡胶粉干法改性沥青混合料高温性能、抗水损害性能及混合料的抗飞散性能,证明了其优良的路用价值。     

Estimation of origin-destination matrices from link counts and sporadic routing data

Estimation of origin-destination (OD) matrices from link count data is a challenging problem because of the highly indeterminate relationship between the observations and the latent route flows. Conversely, estimation is straightforward if we observe the path taken by each vehicle. We consider an intermediate problem of increasing practical importance, in which link count data is supplemented by routing information for a fraction of vehicles on the network. We develop a statistical model for these combined data sources and derive some tractable normal approximations thereof. We examine likelihood-based inference for these normal models under the assumption that the probability of vehicle tracking is known. We show that the likelihood theory can be non-standard because of boundary effects, and provide conditions under which such irregular behaviour will be observed in practice. For regular cases we outline connections with existing generalised least squares methods. We then consider estimation of OD matrices under estimated and/or misspecified models for the probability of vehicle tracking. Theoretical developments are complemented by simulation experiments and an illustrative example using a section of road network from the English city of Leicester.     

干线公路高模量沥青混凝土应用研究

文章试验研究了不同PR/RA改性剂掺量的高模量沥青混凝土(HMAC)的抗车辙性能,分析了层位、层厚、模量、轴载、温度和荷载次数等因素对高模量沥青混凝土路面抗车辙性能的影响程度,提出了合理的路面层位设置、模量取值范围及路面结构组合,并通过某干线公路试验路段,验证了高模量沥青混凝土的抗车辙效果。     

Superpave-13沥青混合料高温稳定性分析

文章结合天水过境高速公路路面实体工程,对不同孔隙率条件下的Super-pave-13高性能沥青混合料进行了车辙试验及SPT试验分析。结果表明,要保证Superpave-13沥青混合料具有较好的高温稳定性,其压实孔隙率应控制在4%～6.5%范围内。     

Traffic noise abatement: How different pavements, vehicle speeds and traffic densities affect annoyance levels

In this paper, annoyance ratings from traffic noise recorded on cobblestones, dense asphalt, and open asphalt rubber pavements are assessed with regard to car speeds and traffic densities. It was found that cobblestones pavements are the most annoying; also while open asphalt rubber pavement imposes less annoyance than dense asphalt it is not significantly different. Higher car speeds always lead to greater annoyance, as does higher traffic densities. LAeq and LAmax correlate well with annoyance, but loudness is the best predictor. Roughness and sharpness exhibit inconsistent interactions.     

燃机动力学建模中复杂结构处理方法研究

提出了三种以动力学相似为基础的转子动力学建模关键技术,并以某型燃气轮机建模为例,对该关键技术进行了验证。利用三种方法,对该燃气轮机的动力学特性进行研究,并与整机试验结果进行了对比。结果表明,动力学分析的准确程度主要由模型决定,本文所提出的三种建模关键技术能够反映结构的真实特性,可用于具有类似结构的双转子系统。     

添加剂剂量对改善沥青紫外线老化作用的影响分析

利用室内紫外线加速老化系统，在确定紫外线对沥青薄膜的老化作用后，采用不同种类的紫外线吸收剂对沥青的抗紫外老化性能进行改善。室内试验结果表明，同一种添加剂在不同剂量时对沥青性能的改善程度各不相同，且某些添加剂在合适剂量时对沥青抗紫外线老化性能有着显著的改善效果。     

基于PFA的派生式简易CAPP系统设计

首先分析了派生式CAPP系统设计采用生产流程分析法(PFA)对零件分组的必要性;详细介绍了基于PFA的派生式简易CAPP系统的设计过程,包括对零件编码、分组、建立特征矩阵及工艺文件等.使用该系统为每个零件编制工艺规程时,只需对标准工艺规程作少量修改,同时还可得到加工所用的机床组,极大地提高了工艺部门的工作效率.