论纯电动乘用车总装生产线的设计

总装生产线设计开发是总装工程的重要内容。文章结合纯电动乘用车的结构特点及工艺要求,对其总装生产过程进行了深入研究及思考,然后以生产线设计步骤为主线,着重分析了基本信息的收集、工艺流程及主线的设计、工艺设备及工艺布局的选择等关键环节,最终提出了纯电动乘用车总装生产线设计工作的方法及要点,这些方法及要点对于总装生产线规划与设计具有一定的实用价值,能有效地保证开发质量、缩短开发周期、降低设计成本。此外,对于企业加快形成更加科学化、高效化、规范化的汽车总装生产新局面有积极的指导意义。     

Vehicle sensor data-based analysis on the driving style differences between operating indoor simulator and on-road instrumented vehicle

Abstract

Indoor simulator and on-road instrumented vehicle are the most popular ways to analyze driving behaviors by using collected Vehicle Sensor Data (VSD). However, for a same driver, the driving performance could be different in the real world and in the simulated world. Even though many studies have been conducted to discover the differences of driving behaviors in these two circumstances, little research has focused on analyzing the differences in driving style, which can provide more integrated knowledge of a driver from the natural structure, stimulus–response mechanism, of driving behaviors. Therefore, in this paper, the driving styles in both the real world and the simulated world are extracted by implementing the nonnegative matrix factorization method on the collected VSD data. Through this analysis, the driving style differences can be quantitatively described and discussed in detail. It is found that the drivers tend to be more unstable and sometimes aggressive when driving the simulator and the deviation in the perception of temporal gap in two circumstances is also discovered. The research findings are particularly valuable to calibrate the driving simulator and construct more reliable driving behavior models.     

Non-fragile multi-objective static output feedback control of vehicle active suspension with time-delay

This paper presents an approach to design a delay-dependent non-fragile H_∞/L₂–L_∞ static output feedback (SOF) controller for active suspension with input time-delay. The control problem of quarter-car active suspension with actuator time-delay is formulated to a H_∞/L₂–L_∞ control problem. By employing a delay-dependent Lyapunov function, new existence conditions of delay-dependent non-fragile SOF H_∞ controller and L₂–L_∞ controller are derived, respectively, in terms of the feasibility of bilinear matrix inequalities (BMIs). Then, a procedure based on linear matrix inequality optimisation and a hybrid algorithm of the particle swarm optimisation and differential evolution is used to solve an optimisation problem with BMI constraints. Design and simulation results of non-fragile H_∞/L₂–L_∞ controller for active suspension show that the designed controller not only can achieve the optimal performance and stability of the closed-loop system in spite of the existence of the actuator time-delay, but also has significantly improved the non-fragility characteristics over controller perturbations.     

A theoretical foundation for the relationship between generalized origin–destination matrix and flow matrix based on ordinal graph trajectories

This paper shows the relationship between flow, generalized origin–destination (OD), and alternative route flow from a set of ordinal graph trajectories. In contrast to traffic assignment methods that employ OD matrix to produce flow matrix, we use ordinal trajectory on a network graph as input and produce both the generalized OD matrix and the flow matrix, with the alternative and substitute route flow matrices as additional outputs. By using linear algebra‐like operations on matrix sets, the relationship between network utilization (in terms of flow, generalized OD, alternative route flow, and desire line) and network structure (in terms of distance matrix and adjacency matrix) are derived. Copyright © 2012 John Wiley & Sons, Ltd.     

探讨模拟数学在学术论文搞质量综合评价中的应用

首先提出，目前仍采用三审制，以语言设计院评价学术文稿质量，其结果模糊，缺乏量化、缺乏稿件之间的可比性，还受到评价人人为因素的影响，有失公正性，探讨应用模糊数学方法评价论文稿质量的可行性，介绍同属模糊数学范畴的方法一和方法二的运用过程，并将运用两方法的结果作比较，提出：方法二的基本内容是主因素决定型的数学模型M（∧，∨），其运用结果仍显模糊，缺乏准确性；方法一简单，实用，结果直观，因为其运用过程中采用了以百分数表达的单因素评价矩阵与几项权重向量的合成运算，运用方法一，可促进编辑部审稿工作的程式化，标准化、自动化。     

关于一类二阶共轭矩阵方程的解

考虑一类二阶共轭矩阵方程 B*X*AXB+B*X*C+C*XB+D=O 其中，B∈Cp×m，A∈n×n，C∈Cn×m，D∈Cm×m，在A＞O及A≥O，C或B为列满秩阵两种情况 下，此方程可解的充分必要条件，并在有解的情况下，给出了通解的显式表示。     

磁吹灭弧在五十铃700P车起动继电器上的应用

对2011年的700P载货汽车用起动继电器的结构和原理进行分析,对该起动继电器的磁吹灭弧装置进行计算、验证。该磁吹灭弧装置首次在汽车电器领域应用,开拓了国产起动继电器的设计思路。     

永磁同步电机作为机车牵引电机的应用现状及前景

在介绍永磁同步电机结构和特点的基础上,对其在机车牵引电机上的应用做了较详细的介绍,并对其应用前景进行了展望。     

磁动力在新能源汽车上的应用

电磁汽车发动机是一款,利用永磁铁和电磁铁同磁极之间,相互排斥的原理,设计出来的一款全新理念的汽车发动机。