炎热干燥大温差条件下胸墙大体积混凝土裂缝控制技术

依托沙特Ras Al Khair港码头5#、6#泊位项目,介绍了在炎热、干燥、大温差、海洋环境下,按美国标准设计和施工的胸墙大体积混凝土裂缝的控制措施。施工过程中,通过配合比的比选、原材料温度的控制、浇筑温度的控制、分层分段以及养护等综合措施,有效控制了胸墙大体积混凝土的开裂,保证施工质量和进度。     

Reasonable compensation coefficient of maximum gradient in long railway tunnels

This paper deals with the theory and calculation methods for compensation of the gradient in railway tunnels through theoretical analysis,numerical calculation,and statistic regression methods.On the basis of the principle that the resultant force is zero,the formula of the maximum calculated gradient was derived for the freight and passenger line and high-speed passenger special line.The formula of aerodynamic drag in tunnel is provided using the domestic and foreign relevant experimental investigations,an...     

Dynamic model for the wheel–rail contact friction

Accurately estimating the coefficient of friction (CoF) is essential in modelling railroad dynamics, reducing maintenance costs, and increasing safety in rail operations. The typical assumption of a constant CoF is widely used in theoretical studies; however, it has been noticed that the CoF is not constant, but rather depends on various dynamic parameters and instantaneous conditions. In this paper, we present a newly developed three-dimensional nonlinear CoF model for the dry rail condition and test the CoF variation using this model with estimated dynamic parameters. The wheel–rail is modelled as a mass–spring–damper system to simulate the basic wheel–rail dynamics. Although relatively simple, this model is considered sufficient for the purpose of this study. Simulations are performed at a train speed of 20 m/s using rail roughness as an excitation source. The model captures the CoF extremes and illustrates its nonlinear behaviour and instantaneous dependence on several structural and dynamic parameters.     

西北沙漠戈壁地区混凝土浇筑特殊养护措施费用分析

地处风沙、干旱地区的建设工程,自然环境条件恶劣,混凝土结构物经过浇筑后,需采取特殊养护措施,才能保证工程质量,从而造成费用增加.此文以处于沙漠戈壁地区的LX铁路部分区段为例,就铁路轨道支撑层、道床板和桥梁墩台采用特殊养护措施所需的材料和人工消耗及费用单价进行分析与计算,并与常规养护措施进行比较.说明采取特殊养护措施后相应费用的不足.应研究解决费用增加的方案。     

Airline network choice and market coverage under high-speed rail competition

While the existing literature has focused on the short-term impacts, this paper investigates the long-term impacts of high-speed rail (HSR) competition on airlines. An analytical model is developed to study how an airline may change its network and market coverage when facing HSR competition on trunk routes. We show that prior to HSR competition, an airline is more likely to adopt a fully-connected network and cover fewer fringe markets if the trunk market is large. Under HSR competition, the airline will, for a given network structure, have a greater incentive to cover more fringe (regional or foreign) markets if the trunk market is large, or the airline network is close to hub-and-spoke. Further, the airline will, for any given market coverage, move towards a hub-and-spoke network when the trunk market is large, or the number of fringe markets covered by the airline network is large. Both effects are more prominent when the decreasing rate of airline density economies is large. We further show that HSR competition can induce the airline to adopt network structure and market coverage that are closer to the socially optimal ones, thereby suggesting a new source of welfare gain from HSR based on its long-term impacts on airlines. Implications for operators, policy makers and specific countries (such as China) are also discussed.     

基于虚拟试验场的强化路面建模方法研究

虚拟试验场是依据某汽车试验场建立的,可用于在仿真环境下对车辆进行路试试验。虚拟试验场的路面建模需要保证具有实际路面特性,文章针对虚拟试验场建立中强化路面的建立问题进行研究,提出一种方法,可以准确的建立虚拟试验场的强化路面。利用双轨路面计测量强化路面的不平度,对测试数据进行分析处理,保证测量结果的准确性,应用试验场规则路面的详细尺寸信息建立模拟路面。对于规则强化路面,应用实际尺寸和技术规范等信息建立,对于不规则强化路面,利用实际测量的路面不平度,通过功率谱估计、路面等级分析、路面不平度数字化等建立模拟路面。通过相关性分析,保证所建立的模拟路面的准确性和可信性。     

某越野汽车制动管断裂原因探究

针对某越野车制动管经常断裂的故障，采用自功率谱密度、模态试验和数据统计方法，分析了影响制动管断裂的主要因素。认为从分动箱到前桥传动轴二阶振动是引起制动管断裂的关键因素。针对该因素介绍和讨论了几个有效的、快速和实用的解决方案：将前桥不等速十字轴式刚性万向节，更换为球笼式等速万向节；将与制动卡钳相连的制动钢管更换为一小段低膨胀、耐高压的软管。针对制动管断裂的原因，改变该车在石块路上进行可靠性试验考核制动管的试验规范，用高速行驶试验来考核制动管的可靠性。     

关联效应对CaCuO2的电荷与自旋密度分布的影响

采用杂化密度泛函方法和哈垂一福克方法对CaCuO2的电荷与自旋密度的分布进行了研究．CuO2层的电子结构具有明显的二维特征．电子间的关联效应使Cu离子的自旋极化被削弱的同时，增强了O离子的自旋极化效应．     

装配式梁桥横向协同工作性能度量指标的研究

为了表征运营期间装配式梁桥的横向协同工作性能,提出了一种间接度量指标——相邻预制梁间的应变相关系数;同时建立了装配式梁桥的简化力学模型,通过推导建立了该指标的解析表达式。理论分析和数值仿真研究表明,在保证足够的样本长度条件下,交通流荷载趋向统计稳定,此时结构特性成为该度量指标的唯一影响因素,证明了该指标具备表征装配式梁桥横向协同工作性能的条件。     

基于Monte Carlo抽样方法的随机离散化在分组数据中的应用

对一种基于Monte Carlo抽样方法的随机离散化做了改进,并将改进后方法应用于分组数据的统计推断中,用来计算未知参数的近似极大似然估计和区间估计.改进后的方法弥补了原方法有时不能满足Sn(f)≈S(f)的缺点.该方法思想简单,易于执行,并且是非迭代,任意维的.所以,通过实例模拟,还可以看出该方法运行速度快,远优于Gibbs抽样、EM算法等其它几种方法.而且运算结果精度高,尤其表现在未知参数的区间估计上.因此提供了一种计算未知参数估计的简单方法.