A real-time adaptive signal control in a connected vehicle environment

The state of the practice traffic signal control strategies mainly rely on infrastructure based vehicle detector data as the input for the control logic. The infrastructure based detectors are generally point detectors which cannot directly provide measurement of vehicle location and speed. With the advances in wireless communication technology, vehicles are able to communicate with each other and with the infrastructure in the emerging connected vehicle system. Data collected from connected vehicles provides a much more complete picture of the traffic states near an intersection and can be utilized for signal control. This paper presents a real-time adaptive signal phase allocation algorithm using connected vehicle data. The proposed algorithm optimizes the phase sequence and duration by solving a two-level optimization problem. Two objective functions are considered: minimization of total vehicle delay and minimization of queue length. Due to the low penetration rate of the connected vehicles, an algorithm that estimates the states of unequipped vehicle based on connected vehicle data is developed to construct a complete arrival table for the phase allocation algorithm. A real-world intersection is modeled in VISSIM to validate the algorithms. Results with a variety of connected vehicle market penetration rates and demand levels are compared to well-tuned fully actuated control. In general, the proposed control algorithm outperforms actuated control by reducing total delay by as much as 16.33% in a high penetration rate case and similar delay in a low penetration rate case. Different objective functions result in different behaviors of signal timing. The minimization of total vehicle delay usually generates lower total vehicle delay, while minimization of queue length serves all phases in a more balanced way.     

A carbon footprint-based closed-loop supply chain model under uncertainty with risk analysis: A case study

The management of products’ end-of-life and the recovery of used products has gained significant importance in recent years. In this paper, we address the carbon footprint-based problem that arises in a closed-loop supply chain where returned products are collected from customers. These returned products can either be disposed of or be remanufactured to be resold as new ones. Given this environment, an optimization model for a closed-loop supply chain (CLSC) in which carbon emission is expressed in terms of environmental constraints, i.e., carbon emission constraints, is developed. These constraints aim to limit the carbon emission per unit of product supplied with different transportation modes. Here, we design a closed-loop network where capacity limits, single-item management and uncertainty on product demands and returns are considered. First, fuzzy mathematical programming is introduced for uncertain modeling. Then, the statistical approach to the possibility to synthesize fuzzy information is utilized. Therefore, using a defined possibilistic mean and variance, we transform the proposed fuzzy mathematical model into a crisp form to facilitate efficient computation and analysis. Finally, the risk caused by violating the estimated resource constraints is analyzed so that decision makers (DMs) can trade off between the expected cost savings and the expected risk. We utilize data from a company located in Iran.     

高速路网不停车收费车道优化布设方法

合理设置高速公路收费站ETC (Electronic Toll Collection)车道数量，对高速公路通行效率至关重要。针对目前路网中ETC与MTC (Manual Toll Collection)车辆混行的情况，考虑ETC的普及率，结合多用户路网均衡模型和排队论方法，建立基于双层规划模型的高速路网ETC车道优化布设方法。上层模型以车辆总通行时间最小为目标，优化设置进出收费站的ETC车道数量；下层模型为多用户路网均衡模型，反映ETC和MTC车辆的路径和收费车道选择行为。下层模型通过设计收费站的等价拓扑结构，表征收费站的车道使用规则及车辆的收费车道选择行为，并采用排队论方法估计ETC和MTC车道的收费排队时间。根据模型的特点设计了基于主动集的启发式算法，利用参数二进制与拉格朗日函数法确定迭代下降方向，解决了下降方向与步长难以计算的问题；通过内嵌优化函数的方式，保证在主动集转化过程中上层约束均不会失效，且避免了迭代过程中的模型解退化问题。基于上海市绕城高速进行实证分析，结果表明：随着ETC普及率的提升，收费排队时长按照负指数趋势下降；与按比例布设ETC车道的方法相比，所提方法最高可降低57.4%的收费排队时间，且该方法可以避免ETC车道布设过多对于MTC车道通行能力挤压造成的负面效果。研究成果可以有效指导高速路网ETC车道的布设，提高路网通行效率。     

Promoting public bike-sharing: A lesson from the unsuccessful Pronto system

In 2014, Seattle implemented its own bike-sharing system, Pronto. However, the system ultimately ceased operation three years later on March 17th, 2017. To learn from this failure, this paper seeks to understand factors that encourage, or discourage, bike-sharing trip generation and attraction at the station level. This paper investigates the effects of land use, roadway design, elevation, bus trips, weather, and temporal factors on three-hour long bike pickups and returns at each docking station. To address temporal autocorrelations and the nonlinear seasonality, the paper implements a generalized additive mixed model (GAMM) that incorporates the joint effects of a time metric and time-varying variables. The paper estimates models on total counts of pickups and returns, as well as pickups categorized by user types and by location. The results clarify that effects of hilly terrain and the rainy weather, two commonly perceived contributors to the failure. Additionally, results suggest that users in the University District, presumably mostly university students, tend to use shared bikes in neighborhoods with a higher household density and a higher percentage of residential land use, and make bike-sharing trips regardless workdays or non-workdays. The paper also contributes to the discussion on the relationship between public transportation service and bike-sharing. In general, users tend to use bike-sharing more at stations that have more scheduled bus trips nearby. However, some bike-sharing users may shift to bus services during peak hours and rainy weather. Several strategies are proposed accordingly to increase bike ridership in the future.     

The generators of paratransit trips by persons with disabilities

Identifying the generators of paratransit trips by persons with disabilities is important to comprehend the current demand patterns and forecast future demand. Only a handful of studies have been conducted so far to identify the generators of paratransit trips and most focused on the home end of the trips. Given some of the inconsistencies in past studies and the scarcity of studies on the generators of trips away from home, this study attempts to identify the generators of paratransit trips beginning and ending at clients’ homes and away from home. It uses an extremely large dataset consisting of 1.91 million trips made by NJ TRANSIT’s Access Link clients, socioeconomic data from the American Community Survey, employment data from the Longitudinal Employer-Household Dynamics, and establishment data from Dun and Bradstreet. The analytical methods include an ordinary least squares model (OLS) and several spatial generalized linear mixed models (GLMM) to identify the characteristics of census block groups associated with Access Link trip generation at home and away from home, Geographic Information System (GIS) analysis to identify the types of establishments located in the immediate vicinity of drop-offs, and a multinomial logit model (MNL) to examine the relationship between the characteristics of the establishments in the vicinity of drop-offs and the characteristics of the dropped-off clients. Together, the various analyses provide useful insights about paratransit trip generators at the macro and micro levels. Some implications of the findings are discussed.     

基于硬化泥膜的填舱换刀技术研究

为了解决砂土地层盾构刀盘换刀作业面易涌水、涌砂进而导致作业面失稳坍塌问题,采用水泥砂浆和膨润土浆液组成的混合浆液在土舱压力作用下,通过刀盘开口向砂土地层渗透,经固化后在原有稳定泥膜的基础上形成新型混合泥膜,在利用风镐清除土舱内硬化混合浆液的同时,保留刀盘前段形成的混合泥膜,即可进行盾构刀盘换刀作业。通过在广州某地铁盾构施工项目中的应用,表明本施工技术能为砂土地层盾构换刀提供高效且安全的解决方案。     

A data model applied to the knowledge-based ICAS

Image-guided computer aided surgery system (ICAS) contributes to safeness and success of surgery operations by means of displaying anatomical structures and showing correlative information to surgeons in the process of operation. Based on analysis of requirements for ICAS, a new concept of clinical knowledge-based ICAS was proposed. Designing a reasonable data structure model is essential for realizing this new concept. The traditional data structure is limited in expressing and reusing the clinical knowledge such as locating an anatomical object, topological relations of anatomical objects and correlative clinical attributes. A data structure model called mixed adjacency lists by octree-path-chain (MALOC) was outlined, which can combine patient's images with clinical knowledge, as well as efficiently locate the instrument and search the objects' information. The efficiency of data structures was analyzed and experimental results were given in comparison to other traditional data structures. The result of the nasal surgery experiment proves that MALOC is a proper model for clinical knowledge-based ICAS that has advantages in not only locating the operative instrument precisely but also proving surgeons with real-time operation-correlative information. It is shown that the clinical knowledge-based ICAS with MALOC model has advantages in terms of safety and success of surgical operations, and help in accurately locating the operative instrument and providing operation-correlative knowledge and information to surgeons in the process of operations.     

“船舶—堆场—列车”混堆堆场箱位分配模型

集装箱海铁联运港口堆场作业箱型复杂,为了提高港口作业能力和效率,基于进口、出口箱的混合堆存方式,对"船舶-堆场-列车"作业堆场箱位分配问题进行研究."船舶-堆场-列车"作业堆场负责堆存通过船舶、列车及外集卡进出港口的集装箱.本文在待分配箱的作业时间及箱区已知的前提下,以集装箱堆存产生的压箱数最小为目标,建立"船舶-堆场-列车"作业混堆堆场箱位分配模型,根据模型特点设计了启发式算法进行求解,并进行算例分析.结果表明,所建模型和求解算法能够有效减少堆场的压箱数,满足箱型堆存要求,提高港口作业效率.     

基于VDI2230-2003标准的动车组车钩联接螺栓强度分析

使用ANSYS软件对某车钩安装座及其联接螺栓进行接触非线性静强度计算,在此基础上基于德国《VDI2230-2003螺栓强度校核标准》对螺栓进行强度评估,并和传统《机械设计手册》计算的结果进行比较,得出两种方法的计算值均满足强度要求,同时前者计算的轴向拉应力水平为后者计算的应力水平的72%,但剪切应力两者相同.     

客运站到发线运用优化研究

为了合理编制客运站到发线运用计划,作者确定了到发线均衡性评价标准,建立了既满足到发线固定使用方案,又达到均衡使用到发线的多目标二次0-1规划模型;并以德州东站为实例,利用LINGO软件进行了求解与验证。