山区公路地质灾害评价模型探讨

目前对公路沿线地质灾害的评价方法以定性评价为主,尚未形成一套行之有效的定量或半定量评价体系和方法。文章根据公路工程的特点以及现有的地质灾害评估理论和实践,并结合公路地质灾害野外调查情况,提出了公路地质灾害发育程度、危害性、发展趋势及危险性评价方法,可供有关部门参考。     

汽车操纵稳定性的广义汽车转向稳态响应模型

针对传统汽车操纵稳定性理论的线性二自由度模型的不足,构建了一个新的广义汽车转向稳态响应模型,并说明了该模型的广泛适用性。以某不足转向轿车模型的有关参数为例,仿真计算并比较了应用两种模型时该轿车等速圆周行驶时的稳态响应状况,验证了广义模型的正确性,同时得到了一条有别于传统汽车操纵稳定性理论的重要结论。     

磁导航车体运动数字控制系统数学模型研究

探讨磁导航车体运动数字控制系统的数学模型。用实验方法建立磁导航车体运动数字控制系统典型环节的时间连续数学模型,结合车体运动机械操纵环节的传统数学模型建立整个控制系统的时间连续数学模型。利用Z变换方法把控制系统时间连续数学模型转换成离散数学模型,引入数字控制系统典型环节的数学模型,建立磁导航车体运动数字控制系统的离散数学模型。设计数字控制系统的二次型最优控制器并进行计算机仿真。仿真分析结果验证了数学模型的有效性。     

高速公路可变收费标准模型研究

在介绍可变收费的理论基础上,分析影响高速公路可变收费标准制定的主要因素,并讨论不同时段收费费率同交通量的关系。在设定的可变收费方案下,建立了出行者选择的二元logit模型,根据调研样本,采用最小二乘法对模型参数标定并对设定的可变收费方案进行评价,结果证明可变收费能使交通流在各时段合理分布,从而提高了高速公路的服务水平。     

大跨径连续刚构桥的温度效应分析

以魏家洲特大桥为例,按照我国公路桥涵设计规范、英国BS5400规范、新西兰规范确定不同的计算模式,对大跨径连续刚构桥进行温度效应分析,得出：温度应力在大跨径连续刚构桥整个桥梁设计中占有很大的比重,且采用不同的温度梯度计算模式,所得到的梁内温度应力值相差较大,甚至出现异号的温度应力.     

Implementation and application of a stochastic aircraft boarding model

The aircraft turnaround processes is mainly controlled by the ground handling, airport or airline staff, except the aircraft boarding, which is driven by the passengers’ experience and willingness or ability to follow the proposed boarding procedures. The paper uses a prior developed, calibrated, stochastic aircraft boarding model, which is applied to different boarding strategies (chronological order of passenger arrival, hand luggage handling), group constellations and innovative infrastructural changes (Flying Carpet, Side-Slip Seat, Foldable Passenger Seat). In this context, passenger boarding is assumed to be a stochastic, agent-based, forward-directed, one-dimensional and discrete process. The stochastic model covers individual passenger behavior as well as operational constraints and deviations. A comprehensive assessment using one model allows for efficient comparison of current research approaches and innovative operational solutions for efficient passenger boarding.     

挂篮底模纵梁受力简化计算方法及承重分配系数

以一桥梁施工工程实例为依托,采用有限元软件ANSYS对桥梁悬臂施工中使用的菱形挂篮进行仿真分析.提出3种简化模式计算底模纵梁的承重分配,对比发现将底模纵梁承受的外荷载简化为集中荷载,并分配至挂篮下前后横梁的方法是最优简化计算方法.在此基础上对挂篮底模纵梁承重分配系数进行优化,从而简化了繁琐的挂篮底模纵梁受力分析计算,保证了挂篮结构设计和施工的安全.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Locating emergency vehicles with an approximate queuing model and a meta-heuristic solution approach

In this paper, the location of emergency service (ES) vehicles is studied on fully connected networks. Queuing theory is utilized to obtain the performance metrics of the system. An approximate queuing model the (AQM) is proposed. For the AQM, different service rate formulations are constructed. These formulations are tested with a simulation study for different approximation levels. A mathematical model is proposed to minimize the mean response time of ES systems based on AQM. In the model, multiple vehicles are allowed at a single location. The objective function of the model has no closed form expression. A genetic algorithm is constructed to solve the model. With the help of the genetic algorithm, the effect of assigning multiple vehicles on the mean response time is reported.