交通运输事故隐患跟踪管理系统开发研究

事故隐患跟踪管理系统主要针对交通运输部门对隐患识别、隐患上报、隐患控制、隐患消除进行全过程的隐患跟踪管理,并以此为依据开发基于B/S实现的交通运输部门隐患跟踪管理系统,以实现交通运输部门不同层级的企事业单位对隐患管理的网络化办公,提高交通行业的安全隐患管理效率,做到防范于未然,把安全隐患消灭在萌芽状态。     

智能分布式驱动汽车路径跟踪/制动能量回收协同控制策略研究

为了解决智能分布式驱动汽车路径跟踪与制动能量回收系统间的协同控制难题,充分考虑分布式驱动汽车四轮扭矩独立可控在智能驾驶系统中的优势,设计适应不同路面附着条件的智能分布式驱动汽车转向、制动分层协同控制策略。上层控制器依据不同的路面类型设计差异化的多目标代价函数,以综合优化各工况下的控制目标。高附路面下,制定满足最大能量回收值的全局参考车速,在线优化路径跟踪指令,实现最优能量回收的同时减小系统运算负荷;低附路面下,优先考虑车辆的路径跟踪性能和行驶稳定性,在多目标代价函数中取消对全局参考车速的跟随要求,增设终端速度约束与能量回收项性能指标并减小能量回收项性能指标的权重系数。上层控制器基于模型预测控制方法对多目标代价函数进行滚动优化与预测求解,得到期望的前轮转角及4个车轮的总制动扭矩需求。下层控制器根据制动扭矩需求对四轮的液压制动扭矩和电机制动扭矩进行分配,最终完成整个复合制动过程。基于MATLAB/Simulink和CarSim软件,搭建控制器在环仿真平台,并在高附和低附路面条件下对所提出的策略进行试验验证。研究结果表明：高附路面下,所提出的控制策略在准确跟踪期望路径的同时相较固定比例制动力分配方法可提升2.7%的能量回收值并减少约0.02 s的单次计算时间;低附路面下,与使用高附控制策略相比,能够保证车辆的路径跟踪准确性与行驶稳定性,同时可提升7.8%的能量回收值;控制器在环试验结果证明了该协同控制策略对车辆性能提升的有效性。     

无信控路段人行横道处行人过街建模与仿真

为精细化描述无信控路段人行横道处行人过街决策及微观运动行为,本文在行人过街行为分析的基础上,基于战术层-操作层构建行人过街双层模型。其中,在战术层面,针对行人分步决策特性,利用二元Logistic回归模型构建路侧和路中行人过街决策模型;在操作层面,针对传统社会力模型在描述行人过街时表现出的局限性,引入行人主动避让力和人行横道对行人的作用力,构建行人过街微观运动模型。最后,通过AnyLogic仿真平台实现行人过街双层模型仿真,并根据实际数据和仿真结果分析模型有效性。结果表明：相较于路侧决策模型,行人性别、停车视距内的车辆数和行人距潜在冲突点的距离这3个因素对行人路中决策结果影响更显著,引入行人主动避让力和人行横道对行人作用力的改进社会力模型,能更好地反映无信控路段行人过街时的行为特征。无信控路段人行横道处行人过街行为仿真模型的有效建立,能为后续行人过街安全改善方案提供决策支持。     

行人过街风格多参数融合识别

行人作为城市慢行交通系统中的弱势群体,探究其过街行为特征,对减少人车冲突,提升行人过街的本质安全具有重要的现实意义。本文针对特定交叉口,设计自由过街及心理临界过街两种场景状态下的行人过街试验。分析过街速度、心理临界时窗及视觉特性等参数之间的耦合关系,选取风险感知因子与临界安全系数作为心理临界过街状态下行人风格的表征指标,构建过街风格识别模型,透析不同风格行人过街行为可靠性。结果表明：年龄对过街速度和心理临界时窗有显著影响;心理临界时窗与过街速度和信号灯区域注视概率呈负相关关系,与车行区域注视概率呈正相关;心理临界过街状态下,依据风格识别结果,男性谨慎程度高于女性,冒险型行人过街失败率为65.22%;冒险型老年人对自身运动机能的评估能力以及视觉搜索特征存在重要缺憾。研究结果可为交叉口基础设施设计与优化,行人过街教育与培训等提供参考。     

Camera calibration and vehicle tracking: Highway traffic video analytics

We describe a real-time highway surveillance system (RHSS), which operates autonomously to collect statistics (speed and volume) and generates incident alerts (e.g., stopped vehicles). The system is designed to optimize long-term real-time performance accuracy. It also provides convenient integration to an existing surveillance infrastructure with different levels of service. Innovations include a novel 3-D Hungarian algorithm which is utilized for object tracking and a practical, hands-off mechanism for camera calibration. Speed is estimated based on trajectories after mapping/alignment with respect to dominant paths learned based on an evolutionary dynamics model. The system, RHSS, is intensively evaluated under different scenarios such as rain, low-contrast and high-contrast lightings. Performance is presented in comparison to a current commercial product. The contribution is innovation of new technologies that enable hands-off calibration (i.e., automatic detection of vanishing points) and improved accuracy (i.e., illumination balancing, tracking via a new 3-D Hungarian algorithm, and re-initialization of background detection on-the-fly). Results indicate the capability and applicability of the proposed system in real-time and real-world settings.     

About the possibilities of using the renewable energy power sources on railway transport

Several electrification systems based on renewable energy power sources (first of all, solar energy) are discussed in respect to their applicability to railway transport and, in particular, to suburban electric trains. Two systems are considered with basic technical details and economic estimation, both including the onboard bank of batteries and the photovoltaic converters (PVC) of solar energy for compensation of energy expenses, which could be positioned either on stations or on wagon's roofs. Sun‐tracking systems and their effect on the solar energy conversion efficiency are discussed in application to stationary and moving PVC platforms. An analysis made shows that introduction of the “green” systems discussed will not only have positive ecological impact, but also can bring a notable economical effect even with today's components, while it could be considerably greater with the usage of new PVCs, which are being developed by the authors. Copyright © 2011 John Wiley & Sons, Ltd.     

RFID在列车运行控制系统中的应用

介绍RFID技术及工作原理,并将其在列控系统中的应用方式进行描述,最后举例介绍了以RFID构成的点式列控系统.