螺旋桨低频宽带噪声影响参数研究与流—声多目标优化设计

文章以谱方法为理论基础,以条带法为数值求解方法,针对Sears力响应函数引入厚度修正,建立了螺旋桨低频宽带噪声理论预报方法.通过对比10叶模型螺旋桨水筒试验数据,验证了厚度修正的效果,厚度修正后总声级误差由2 dB减少至1.1 dB.文中利用厚度修正后的预报方法,从三个层次六个方面对影响螺旋桨低频宽带噪声的参数进行研究,并实现了流-声多目标优化设计:(1)单个螺旋桨影响参数灵敏度分析:①外半径型值对总声级影响较大,而内半径几乎没有影响.②利用Sobol灵敏度分析法对两个不同叶数螺旋桨的流场参数和螺旋桨参数进行研究发现:不同桨叶下各参数影响因子几乎一致,来流速度对于螺旋桨低频宽带总声级有最大贡献,约为30％的正效应,其次是湍流度约为22％的正效应,而湍流积分长度仅占7％的负效应.(2)单个螺旋桨流—声多目标优化设计研究:以NSGA-Ⅱ为优化算法,结合非定常面元法和低频宽带噪声预报方法,实现流-声多目标优化设计.(3)多个螺旋桨相对关系稳健性分析:对不同螺旋桨低频宽带噪声相对关系稳健性进行研究,分析湍流积分长度和湍流度变化的影响.该文的研究成果为下一步将低频宽带噪声纳入螺旋桨设计考核指标奠定了理论基础.     

载人潜器非耐压结构多目标优化设计

基于近似模型技术和多目标优化理论开展框架结构优化设计。针对传统优化方法不能实现自动计算和连续优化的问题,采用APDL参数化语言实现了框架结构的参数化建模,并将Ansys与ISIGHT集成搭建了框架结构的优化设计流程。基于试验设计,根据灵敏度分析完成了框架结构设计变量的筛选,通过近似模型的精度分析构建了框架结构响应面近似模型。采用响应面近似模型进行数值计算,使用智能优化算法完成框架结构单目标和多目标优化设计,并将结果与有限元计算值对比,验证基于近似模型优化的准确性。     

基于三维势流理论的耐波性数值预报

准确预报船体运动响应对于砰击等波浪载荷的计算以及合理结构设计具有重要意义。船舶在大幅波浪中的运动呈明显的非线性,而现阶段耐波性预报多采用线性切片方法。三维水动力分析软件 WASIM基于时域势流理论,采用 Rankine面元法预报船舶在波浪中的运动响应,并考虑了多种非线性因素。本文以标模 DTMB5512为对象,采用 WASIM预报其在不同航速下的耐波性,并与基于线性切片理论的计算结果和模型试验结果进行对比。结果表明：利用 WASIM计算得到的船体运动响应比其他方法更接近试验值,合理体现了船舶在风浪中的实际耐波性能。因此,利用 WASIM能够较好地评估船舶在波浪中的非线性耐波特性。     

The relationship between urban street networks and private motorized trips at the city level

There are factors that impact car usage in urban areas, such as density, diversity and design, but there have been few studies that examine the relationship between street network factors and car usage at the city level (macro level). This paper focuses on this relationship by introducing urban street network variables, such as blocks per area, nodes per block and length of roads and motorways, as independent variables and the percentage of daily trips by private motorized modes as the dependent variable. The street network in this study includes interconnecting lines and points that present streets, roads, motorways, intersections and blocks. The strength of the relationship in this study is found using multiple linear regression. The findings of this research indicate that an increase in car usage is correlated with an increasing number of blocks per area, number of nodes per block and length of motorways. In addition, because the urban street network is the result of macro-scale planning decisions, considering this relationship can lead to better planning decisions.     

低压气液混输采气管道串接集气模式研究

针对杭锦旗气田高液气比气井井间串接集气距离长、管道压损大的问题,文中用权重法估算了影响管道气液混输距离的因素,表明管道直径是影响集气距离的最重要因素,权重比约56.1%。根据杭锦旗气田气井生产参数,对不同采气管道规格串接模式进行了研究,确定了适用于不同集气量和串接井数的采气管道规格系列,提出了直线式与辐射式相结合的井间串接模式,为杭锦旗气田地面集输站场和管网设计提供技术依据。     

Short‐term traffic flow prediction with linear conditional Gaussian Bayesian network

Traffic flow prediction is an essential part of intelligent transportation systems (ITS). Most of the previous traffic flow prediction work treated traffic flow as a time series process only, ignoring the spatial relationship from the upstream flows or the correlation with other traffic attributes like speed and density. In this paper, we utilize a linear conditional Gaussian (LCG) Bayesian network (BN) model to consider both spatial and temporal dimensions of traffic as well as speed information for short‐term traffic flow prediction. The LCG BN allows both continuous and discrete variables, which enables the consideration of categorical variables in traffic flow prediction. A microscopic traffic simulation dataset is used to test the performance of the proposed model compared to other popular approaches under different predicting time intervals. In addition, the authors investigate the importance of spatial data and speed data in flow prediction by comparing models with different levels of information. The results indicate that the prediction accuracy will increase significantly when both spatial data and speed data are included. Copyright © 2016 John Wiley & Sons, Ltd.     

Mathematical model for optimising the sequence for clearing snow from the manoeuvring area during winter operations

This article considers the optimisation of the sequence for clearing snow from stretches of the manoeuvring area of an airport. This issue involves the optimisation of limited resources to remove snow from taxiways and runways thereby leaving them in an acceptable condition for operating aircraft. The airfield is divided into subsets of significant stretches for the purpose of operations and target times are established during which these are open to aircraft traffic. The document contains several mathematical models each with different functions, such as the end time of the process, the sum of the end times of each stretch and gap between the estimated and the real end times. During this process, we introduce different operating restrictions on partial fulfilment of the operational targets as applied to zones of special interest, or relating to the operation of the snow‐clearing machines. The problem is solved by optimisation based on linear programming. The article gives the results of the computational tests carried out on five distinct models of the manoeuvring area, which cover increasingly complex situations and larger areas. The mathematical model is particularised for the case of the manoeuvring area of Adolfo Suarez Madrid—Barajas Airport. Copyright © 2016 John Wiley & Sons, Ltd.

Highlights
• Optimal sequence for clearing snow from the manoeuvring area of an airport.
• Contains optimising algorithms solved using CPLEX LP‐based tree search.
• Restrictions on partial fulfilment of operational targets applied to subsets of significant stretches, used for planning the operation of snow‐clearing machines.
• Model applied to the case of the manoeuvring area of Adolfo Suárez Madrid Barajas Airport.
• Conclusions are given on the results of the computational tests carried out. There are five models of the manoeuvring area which cover increasingly complex situations and larger areas.

     

基于秩约束的车辆遮挡点恢复方法

为了恢复车辆跟踪过程中丢失的特征点,提出了一种基于秩约束的车辆遮挡点恢复方法,该方法利用所有车辆图像点组成一个秩3的矩阵,并利用该特性构造一个投影矩阵,利用该投影矩阵求到车辆遮挡点,再将求到的车辆遮挡点代替图像中的车辆遮挡点,经过多次迭代,最后求到车辆遮挡点的真实位置。该方法的优点是所有的图像及图像点都平等地看待,模拟试验和真实试验表明,该方法具有鲁棒性好、收敛性好及误差小等优点。     

汉语编程在MapX二次开发中的应用

交通地理信息系统因具有强大的信息服务和管理功能,越来越受到人们的重视。MapX作为GIS设计中一个常用的功能组件．其当前的主要编程环境是英文,这对于英文程度不高的汉语软件开发者来说无疑是个羁绊。因此,通过实例详细说明在易语言汉语编程开发环境下如何利用MapX开发GIS软件的方法,对于该组件的进一步推广应用具有一定的意义。     

Daily Generation Strategies with Consideration of Electricity Contract and Spinning Reserve

When programming the daily generation strategies, power plants consider not only the competitive bids in spot market and the original purchase contracts with distribution companies or users, but also the spinning reserve. Aiming at this goal, the paper puts forward a daily generating model, which is a nonlinear programming model containing integral and continous variables, to coordinate the power volumes of competitive bids, contract and the spinning reserve of power plants and thus to maximize their profits. Then, the model is simplified to ease its solving process, and solved by priority ranking method based on efficiency and quadratic programming. The simulation result of a case study shows that the proposed scheme is reasonable and practicable.