集装箱物流收益管理的能力分配模型

提出了研究不确定环境下集装箱物流收益管理的框架．针对集装箱物流收益管理系统的核心问题——运输能力分配，建立了考虑整条航线多个港口需求不确定性的舱位分配随机规划模型，并介绍了用机会约束规划方法求解模型的步骤．通过实例数值仿真，证明了该模型的可行性，并揭示了船舶承载能力对需求较大的航段的舱位分配策略影响较大，而需求的波动对舱位分配策略也有较大影响．     

信息不对称下交通运输管理中的最优激励

应用信息经济学的委托代理理论,将政府作为委托人,交通运输管理人员作为代理人,研究了在委托人对代理人的能力水平有不完全信息的逆向选择和在管理活动中代理人的努力程度等行为不可能跟踪监督的道德风险同时存在的广义委托代理中的最优激励机制.通过建立非线性规划的数学模型,获得了在风险中性的委托人为具有"勤能补拙"特征的风险厌恶的代理人设计的最优激励工资合同的混同均衡的显式解,混同的工资合同解释了岗位工资的合理性和激励作用.     

永磁直线同步电机的推力波动分析研究

为改善永磁直线同步电机的控制性能,需要研究减小其推力波动的技术措施.文中对PM LSM推力波动的产生机理进行分析,指出关键是反电动势波形的正弦形,并进一步论述通过改善反电动势波形降低推力波动的有效措施是合理选择极弧系数与分数槽或分布绕组设计相配合.对理论进行了实验验证.     

信号控制模型中利益分配问题的研究

设计了一个平衡约束条件下信号控制与平衡网络设计组合问题的多目标规划模型，然后使用效用函数法将有双目标的上层优化问题转化为一个单目标优化问题．在这种情况下，该模型变成一个标准的双层规划模型。并利用全局优化方法模拟退火算法和惩罚函数法相结合求解．     

A high-performance low cost inverse integer transform architecture for AVS video standard

A high-performance, low cost inverse integer transform architecture for advanced video standard (AVS) video coding standard was presented. An 8×8 inverse integer transform is required in AVS video system which is compute-intensive. A hardware transform is inevitable to compute the transform for the real-time ap-plication. Compared with the 4×4 transform for H.264/AVC, the 8×8 integer transform is much more complex and the coefficient in the inverse transform matrix Ts is not inerratic as that in H.264/AVC. Dividing the Ts into matrix S8 and R8, the proposed architecture is implemented with the adders and the specific CSA-trees instead of multipliers, which are area and time consuming. The architecture obtains the data processing rate up to 8 pixels per-cycle at a low cost of area. Synthesized to TSMC 0.18 μm COMS process, the architecture attains the operating frequency of 300 MHz at cost of 34 252 gates with a 2-stage pipeline scheme. A reusable scheme is also introduced for the area optimization, which results in the operating frequency of 143 MHz at cost of only 19 758 gates.     

A network optimization-based approach for crowd management in large public gatherings

Effective crowd management during large public gatherings is necessary to enable pedestrians' access to and from the venue and to ensure their safety. This paper proposes a network optimization-based methodology to support such efficient crowd movement during large events. Specifically, a bi-level integer program is presented that, at the upper-level, seeks a reconfiguration of the physical layout that will minimize total travel time incurred by system users (e.g. evacuees) given utility maximizing route decisions that are taken by individuals in response to physical offerings in terms of infrastructure at the lower-level. The lower-level formulation seeks a pure-strategy Nash equilibrium that respects collective behavior in crowds. A Multi-start Tabu Search with Sequential Quadratic Programming procedure is proposed for its solution. Numerical experiments on a hypothetical network were conducted to illustrate the proposed solution methodology and the insights it provides.     

An optimal pole-matching observer design for estimating tyre–road friction force

In this paper, considering the dynamical model of tyre–road contacts, we design a nonlinear observer for the on-line estimation of tyre–road friction force using the average lumped LuGre model without any simplification. The design is the extension of a previously offered observer to allow a muchmore realistic estimation by considering the effect of the rolling resistance and a term related to the relative velocity in the observer. Our aim is not to introduce a new friction model, but to present a more accurate nonlinear observer for the assumed model. We derive linear matrix equality conditions to obtain an observer gain with minimum pole mismatch for the desired observer error dynamic system. We prove the convergence of the observer for the non-simplified model. Finally, we compare the performance of the proposed observer with that of the previously mentioned nonlinear observer, which shows significant improvement in the accuracy of estimation.     

An investigation into the mechanism of the polygonal wear of metro train wheels and its effect on the dynamic behaviour of a wheel/rail system

This paper presents a detailed investigation conducted into the mechanism of the polygonal wear of metro train wheels through extensive experiments conducted at the sites. The purpose of the experimental investigation is to determine from where the resonant frequency that causes the polygonal wear of the metro train wheels originates. The experiments include the model tests of a vehicle and its parts and the tracks, the dynamic behaviour test of the vehicle in operation and the observation test of the polygonal wear development of the wheels. The tracks tested include the viaducts and the tunnel tracks. The structure model tests show that the average passing frequency of a polygonal wheel is approximately close to the first bending resonant frequency of the wheelset that is found by the wheelset model test and verified by the finite element analysis of the wheelset. Also, the dynamic behaviour test of the vehicle in operation indicates the main frequencies of the vertical acceleration vibration of the axle boxes, which are dominant in the vertical acceleration vibration of the axle boxes and close to the passing frequency of a polygonal wheel, which shows that the first bending resonant frequency of the wheelset is very exciting in the wheelset operation. The observation test of the polygonal wear development of the wheels indicates an increase in the rate of the polygonal wear of the wheels after their re-profiling. This paper also describes the dynamic models used for the metro vehicle coupled with the ballasted track and the slab track to analyse the effect of the polygonal wear of the wheels on the wheel/rail normal forces.     

Dynamic location: an iconic model to synchronize temporal and spatial transportation data

This paper describes a model to synchronize the management and query of temporal and spatially referenced transportation data in geographic information systems (GIS). The model employs a method referred to as dynamic location, which facilitates spatial intersect queries from geographic shapes without the use of topological relationships. This is the inverse of how dynamic segmentation works in GIS. In contrast to dynamic segmentation, dynamic location stores geometry as an object within a single database field. This is an efficient, precise iconic model superseding the need for data decomposition into a complex set of tables. As an object model, the dynamic location process lends itself to high performance in an Internet, data-intensive, enterprise environment. Linear events are stored as {x, y} features, and not referenced to any route system. Route systems are built from {x, y, m} values (m for measure) and serve as number lines for mathematical operations. Any {x, y} object can then be referenced to either the Cartesian grid or any selected number line. This method offers the benefits of linear referencing, while making full use of a stable geodetic datum. Combinations of any {x, y} events may be placed over any {x, y, m} number line (route) and an intersect determined by looking through stacked {x, y, m} vertices of the coincident shapes. Since both geometry and shape reside in the same record, the use of “begin” and “end” dates facilitates full spatial and temporal version control. From a business process perspective, this creates a spatially enabled database, pulling GIS business functions back into the information technology mainstream.     

基于交通约束的城市最佳用地结构模糊规划模型研究

提出了基于交通系统容量约束的城市土地使用模糊规划模型.该模型以最大开发强度为目标,以交通总生成量不超过路网交通容量为约束条件,确定土地使用优化结构.作为城市规划分析模型中的1个子模型,该模型已在城市的总体规划中得到应用.规划实践表明,模型具有重要的理论价值和较强的可操作性.