基于GIS的多模式动态网络装载程序设计研究

给出了一个基于GIS的多模式动态网络装载程序设计流程。首先，给出了一个新的基于GIS的框架，使之能够用于动态的交通数据的融合、分析以及可视化。这个框架的主要特征是将用于显示空间地图数据与用于动态网络装载的动态交通信息融入统一的体系中。而后给出了相应的多模式动态网络装载程序流程，包括：数据输入，数据预处理以及相应的多模式动态网络装载程序。最后，给出了相应的仿真试验以及结论。     

桥梁混凝土水管冷却温度场有限元分析

针对混凝土水管冷却温度场的计算问题，分析了当前冷却水管有限元分析的主要方法，对多重网格法进行有效的处理，从而在不增加计算时间的前提下能更准确地计算出水管冷却温度场。基于这种处理方法，结合通用软件ANSYS对某高墩大跨刚构桥桥墩混凝土水管冷却温度场进行了仿真分析，计算结果与实测数据比较表明该方法计算精度是较高的。     

餐饮物流配送路线的优化研究

近年来,我国的餐饮企业迅速发展壮大,随之而来的问题是如何控制物流配送成本,合理的配送规划将直接影响一个企业的成本控制、效率和竞争能力。针对餐饮业的特点提出一个规划方案:按货物品种来确定配送节点的方法,并以此为基础,分别从选择配送点和对路线变更方案进行了研究。最后的算例将提出的总成本概念应用到用最短路径方法中来求解最优路径,表明全面的成本概念在配送规划中的重要作用。     

钢网面板加筋土挡墙动力特性试验的变形研究

基于泥质红砂岩粗粒土填料，采用MTS分别模拟地震荷载、交通荷载、加-卸载多循环荷载进行大尺寸模型试验，研究了钢网面板土工格栅加筋土挡墙在上述荷载作用下的动力特性，获得了不同峰值的水平地震激励下模型挡墙不同位置的水平动位移、竖向动位移峰值响应等实测值；采用不同频率、不同幅值的竖向交通荷载正交试验法，获得了该模型挡墙在重复荷载作用下的最大水平变形、最大沉降量及位置等动力特性参数值；通过7种荷载、21组加卸载循环试验，获得了加一卸载多循环荷载作用下的实测沉降值。试验结果表明：该加筋结构具有整体变形的特性，是优良的抗震结构，能承受抗震设防烈度为9度的地震荷载；同时该加筋结构具有良好的稳定性和抗破坏性，重复荷载的幅值和振动次数对结构动力变形特性的影响较大，而振动频率对变形特性的影响不显著；多循环荷载作用下该加筋结构能够明显减小不均匀沉降。过长的筋材并不能明显地改善加筋土挡墙的动力特性。     

Ant Colony Routing algorithm for freeway networks

Dynamic traffic routing refers to the process of (re)directing vehicles at junctions in a traffic network according to the evolving traffic conditions. The traffic management center can determine desired routes for drivers in order to optimize the performance of the traffic network by dynamic traffic routing. However, a traffic network may have thousands of links and nodes, resulting in a large-scale and computationally complex non-linear, non-convex optimization problem. To solve this problem, Ant Colony Optimization (ACO) is chosen as the optimization method in this paper because of its powerful optimization heuristic for combinatorial optimization problems. ACO is implemented online to determine the control signal – i.e., the splitting rates at each node. However, using standard ACO for traffic routing is characterized by four main disadvantages: 1. traffic flows for different origins and destinations cannot be distinguished; 2. all ants may converge to one route, causing congestion; 3. constraints cannot be taken into account; and 4. neither can dynamic link costs. These problems are addressed by adopting a novel ACO algorithm with stench pheromone and with colored ants, called Ant Colony Routing (ACR). Using the stench pheromone, the ACR algorithm can distribute the vehicles over the traffic network with less or no traffic congestion, as well as reduce the number of vehicles near some sensitive zones, such as hospitals and schools. With colored ants, the traffic flows for multiple origins and destinations can be represented. The proposed approach is also implemented in a simulation-based case study in the Walcheren area, the Netherlands, illustrating the effectiveness of the approach.     

Intermodal and international freight network modeling

The authors describe the development and application of a single, integrated digital representation of a multimodal and transcontinental freight transportation network. The network was constructed to support the simulation of some five million origin to destination freight shipments reported as part of the 1997 United States Commodity Flow Survey. The paper focuses on the routing of the tens of thousands of intermodal freight movements reported in this survey. Routings involve different combinations of truck, rail and water transportation. Geographic information systems (GIS) technology was invaluable in the cost-effective construction and maintenance of this network and in the subsequent validation of mode sequences and route selections. However, computationally efficient routing of intermodal freight shipments was found to be most efficiently accomplished outside the GIS. Selection of appropriate intermodal routes required procedures for linking freight origins and destinations to the transportation network, procedures for modeling intermodal terminal transfers and inter-carrier interlining practices, and a procedure for generating multimodal impedance functions to reflect the relative costs of alternative, survey reported mode sequences.     

基于FMECA故障分析的高速动车组制动系统RAMS研究

高速动车组制动系统RAMS管理能够保证车辆在其全寿命周期内达到其功能要求。文章以CRH2型高速动车组制动系统为对象建立了可靠性模型,利用FMECA方法,系统地分析了制动系统的故障模式影响及危害性,并将其可能的故障模式按严重程度分类,以便采取改进措施。     

无碰撞区准同步跳频通信系统多址干扰性能分析

基于跳频通信边缘效应的多址干扰性能分析模型,即四碰撞态Markov过程模型,本文分析了基于新型无碰撞区(NHZ)跳频序列的准同步跳频通信系统用户干扰性能。当准同步跳频系统组网时工作在NHZ跳频序列集的无碰撞区内时,用户的载波频率表现为无碰撞状态;而在无碰撞区边缘的碰撞状态则可视具体情况分为无碰撞或左碰撞或右碰撞状态;对于无碰撞区外的碰撞状态则为无碰撞或左碰撞或右碰撞或左右都碰撞的状态。据此本文分析了无碰撞区准同步跳频通信系统的载波频率碰撞状态序列的特性,并提出适合无碰撞区准同步跳频通信系统的用户干扰性能分析模型。分析和数值结果表明,采用NHZ跳频码的准同步跳频通信系统的多址干扰性能优于采用随机跳频码的异步通信系统。     

CRH3动车组单车隧道压力波特性估算

采用国内研制的高速列车通过隧道时压力波计算程序,模拟了特定隧道条件下CRH3动车组单车隧道压力波的基本特性,给出了隧道内、车头车尾处的压力波分布情况,以及对应车内处3 s内最大压差值等随车速变化的规律。同时,比较了动车组在德国和我国隧道条件下压力波的异同点。     

考虑前后多车的网联自动驾驶车辆混流跟驰模型

随着中国新基建战略的提出及自动驾驶和网联通信技术的不断发展，网联自动驾驶车辆（CAV）、自动驾驶车辆（AV）和常规人驾车辆混行的交通流将在未来长时间存在。建立适用于网联自动驾驶车辆、自动驾驶车辆和常规人驾车辆3种类型车辆的混流跟驰模型，考虑多前后车车头间距、多前车速度差、加速度差、与主体车辆的相对距离等因素，并进行典型场景的数值仿真。刹车和起步过程的3种混流数值仿真结果显示，模型在几种典型混行场景下均具有可行性，车辆的加速度和速度变化更为平缓。不同CAV比例下的数值仿真结果显示，车队中CAV比例越高，车队整体恢复至平稳状态的时间越短，波动幅度越小。CAV均质流数值仿真结果表明，与MHVAD模型相比，该模型不稳定区域减小33.8%，所控制的车队速度波动幅度减小14%。CAV与AV混流的数值仿真结果显示，与PATH实验室模型相比，由该模型控制的车队加速度进入相对稳定状态提前5.5 s。该模型可用于不同车辆均质流及3种车辆混行的队列控制，在目前开展混行实车试验困难的情况下，也可应用该模型进行混行跟驰仿真，从而为混行交通流的道路交通管理及基础设施布设提供理论依据和模型支持。