CRH3动车组单车隧道压力波特性估算

采用国内研制的高速列车通过隧道时压力波计算程序,模拟了特定隧道条件下CRH3动车组单车隧道压力波的基本特性,给出了隧道内、车头车尾处的压力波分布情况,以及对应车内处3 s内最大压差值等随车速变化的规律。同时,比较了动车组在德国和我国隧道条件下压力波的异同点。     

Cost-time Minimization in a Transportation Problem with Fuzzy Parameters: A Case Study

In real world applications the supply, the demand and the transportation cost per unit of the quantities in a transportation problem are hardly specified precisely because of the changing economic and environmental conditions. It is also important that the time required for transportation should be minimum. In this paper a method has been proposed for the minimization of transportation cost as well as time of transportation when the demand, supply and transportation cost per unit of the quantities are fuzzy. The problem is modeled as multi objective linear programming problem with imprecise parameters. Fuzzy parametric programming has been used to handle impreciseness and the resulting multi objective problem has been solved by prioritized goal programming approach. A case study has been made using the proposed approach.     

浅水沉管船的锚泊定位系统设计

浅水锚泊系统的设计增加了诸多挑战,恶劣的环境使船舶具有较大的低频漂移运动,同时锚泊系统需要有足够的恢复力特性。文章针对深中通道沉管船,基于三维势流理论,在时域下对安装船和沉管系统进行分析,设计出合适的锚泊系统,并验证了锚泊系统设计的安全性。同时为以后类似系统的设计提供借鉴。     

某轿车发动机冷却系统水温偏高的分析与改进

轿车发动机水温偏高会导致发动机过热,引起功率下降和油耗增加,是发动机开发过程中必须解决的问题。文章从发动机冷却系统零部件性能入手进行分析,并进行了试验方案设计,找出了引起发动机水温偏高的主要原因。提出通过修改节温器的开启温度和升程,可解决冷却系统水温偏高的难题。为发动机冷却系统故障排除指出了解决思路。     

乔列斯基分解应用于偏相干问题的可行性研究

在应用传统的偏相干方法进行噪声源识别时,计算条件输入和耦合较为繁琐、复杂。文章首先通过对偏相干和乔列斯基分解的分析,得到两者之间的关系;进一步运用数学归纳法,从理论上证明了乔列斯基分解应用于偏相干问题的可行性;然后指出对归一化互谱矩阵进行乔列斯基分解,可直接得到各源的贡献比大小;最后给出了应用乔列斯基分解解决偏相干问题的一般步骤。舱段试验验证了该方法的可行性和实时性。     

兰彻斯特方程的参数取值与计算

文章分析了兰切斯特方程各个参数的影响因素,提出了参数的取值和计算方法,计算过程不需要专家给出主观数值。文中恰当的将火力分配问题转化为目标选择问题,应用ISM模型构建了目标选择结构图,给出了火力分配系数的计算方法。     

电分相设置对高速动车组运行速度及时分影响研究

高速铁路对列车运行安全及运输效率的要求越来越高,电分相对列车运行速度和时间的影响逐步受到重视。本文重点研究采用不带电过分相方式对列车运行速度及时分的影响,通过描述动车组不带电自动电分相的微观过程,建立了电分相对速度及时分影响的算法,模拟计算了不同运行条件、不同设置位置和纵断面情况下电分相对列车速度及时分的影响,提出高速...     

沉桩施工溜桩问题分析及解决措施

在码头桩基施工过程中,尤其是在软基条件下的沉桩施工,出现溜桩是一种常见现象.对溜桩产生原因进行分析,指出溜桩可能引发的各种问题,若对溜桩处理不当,会造成桩身裂缝、断桩等缺陷,严重时可能还会造成安全事故,在此基础上,结合具体工程案例,介绍了溜桩事前和事后所采取的解决措施,并进一步对解决措施进行检验,经检验,解决措施效果良好,可为同类工程提供借鉴.     

电力电子变压器多指标非线性控制研究

电力电子变压器是一种通过电力电子变换实现电力系统能量传递的新型变压器.以微分几何理论为基础,实现非线性系统的多性能指标控制,提出基于跟踪偏差的非线性控制器,以实现改善电力系统控制性能的目的,从而可在统一的非线性控制设计框架下同时对系统中多个状态量的性能指标提出要求.所提控制策略解决了系统的非线性问题,改善了系统的动态性能,仿真结果表明设计的控制方法在电力电子变压器输出稳定性控制.     

High-speed train control based on multiple-model adaptive control with second-level adaptation

Speed uplift has become the leading trend for the development of current railway traffic. Ideally, under the high-speed transportation infrastructure, trains run at specified positions with designated speeds at appointed times. In view of the faster adaptation ability of multiple-model adaptive control with second-level adaptation (MMAC-SLA), we propose one type of MMAC-SLA for a class of nonlinear systems such as cascaded vehicles. By using an input decomposition technique, the corresponding stability proof is solved for the proposed MMAC-SLA, which synthesises the control signals from the weighted multiple models. The control strategy is utilised to challenge the position and speed tracking of high-speed trains with uncertain parameters. The simulation results demonstrate that the proposed MMAC-SLA can achieve small tracking errors with moderate in-train forces incurred under the control of flattening input signals with practical enforceability. This study also provides a new idea for the control of in-train forces by tracking the positions and speeds of cars while considering power constraints.