脉冲电沉积制备Ni-Mo合金析氢电极

分别采用直流电沉积法和脉冲电沉积法制备出了高催化活性的Ni-Mo合金电极。通过阴极极化曲线得到了析氢反应的动力学参数,进而比较了不同电极的析氢性能,并分别采用SEM、EDX及XRD等表征手段分析了不同电极析氢性能优劣的原因。结果表明,脉冲电沉积可以提高镀层中Mo元素的含量,且其镀层晶粒更加细小,呈现一种纳米晶态,这些都导致脉冲电沉积Ni-Mo合金电极析氢过电位比直流电沉积更低,从而显示了脉冲电沉积制备Ni-Mo合金电极有更好地应用前景。     

W6X35型船用低速柴油机的研制

根据柴油机燃烧理论,应用电控技术,优化燃油系统,提高伺服油的工作压力,采用新一代CLU5气缸润滑技术和新一代柴油机控制系统——"UNIC控制系统",实现柴油机的全电子智能控制,从而实现在满足最新排放的要求下,提高其经济性、可靠性、操纵灵活性和延长使用寿命。     

基于数字信号处理器实现特定消谐脉宽调制控制技术的研究

在大功率交流传动控制中,传统的PWM(脉宽调制)方法输出由于存在低次谐波,会使电流和转矩产生脉动,影响控制精度.以三相电压型逆变器为分析对象,提出了一种基于数字信号处理器(DSP)来实现特定次谐波消除脉宽调制(SHEPWM)控制技术.该技术是首先根据SHEPWM控制技术的基本原理建立其特定谐波消除中开关角与调制度之间的...     

铜镍管直流脉冲TIG焊工艺试验与应用

为改善铜镍管焊接时的焊缝成形、提高焊接质量,选择手工直流脉冲钨极惰性气体(Tungsten Inert Gas,TIG)焊并采取无间隙组对进行工艺试验。经相关检测,焊后内外焊缝成形优良,表面无缺陷,X射线探伤满足规范要求。试验结果表明:采用手工直流脉冲TIG焊可有效改善管子内壁焊缝成形、减少焊接缺陷、提升焊接质量;采取无装配间隙的组对方式可提高管子零件的制作精度与工作效率,在实船应用中得到推广并取得较好的效果。     

A line impedance stabilization network for pulse current injection北大核心CSCD

［Objective］Aiming at the deficiency of the existing line impedance stability network (LISN) in the electromagnetic pulse protection capability, a LISN suitable for the pulse current injection (PCI) test of electrical and electronic equipment is proposed. ［Methods］Aiming at the characteristics of high peak value and fast rise of the pulse current in PCI testing, the circuit structure and physical structure of the LISN are improved on the existing basis through PSpice time-domain and frequency-domain simulation combined with engineering design requirements, thereby giving it good nanosecond pulse protection performance and impedance stability at the same time. Pulse current protection performance test and impedance curve test experiments are then designed and carried out.［Results］The experimental results show that the improved LISN can attenuate the injected pulse current by 60 times, while the error of its impedance curve is less than 5% compared with the Type 5 µH LISN in GJB 151B-2013. ［Conclusions］The proposed LISN has good impedance stability and decoupling ability, and can be used in the PCI testing of electrical and electronic equipment in order to protect the power supply and improve the repeatability of testing. © 2023 Chinese Journal of Ship Research. All rights reserved.     

狭长深基坑半盖挖施工技术探究

城市地下开挖往往因场地的限制增加工程的难度.以上海诸光路通道新建工程为背景,依据“时空理论”对半盖挖法在狭长深基坑中的应用效果展开研究,并以围护结构与立柱的实测位移数据证明了其适用性,对今后类似条件下的施工具有一定的借鉴意义.     

Numerical method of electromagnetic pulse response of conductor with complex load北大核心CSCD

[Objectives]Electromagnetic pulse can seriously affect and even destroy naval shipborne electronic information systems, weapons, equipment and so on. Due to the complexity of the antenna port load circuit, it is necessary to formulate a numerical method which can easily obtain the antenna load current. [Methods]The induced current of the terminal is obtained on the basis of the finite-difference time-domain (FDTD) and Holland model. According to the Thévenin equivalent circuit, the conductor is equivalent to the voltage source to realize decoupling between the conductor and load end, and the load circuit is solved using Simulink software.[Results]Compared with the traditional terminal model, this method is simple and feasible for high-order circuit processing. The effectiveness of the model is verified using non-linear elements and parallel capacitors and resistors as the load respectively. The results show that the calculation results of this method are consistent with those of the traditional methods. Finally, the antenna of the end-connected protect- or is calculated. The results show that the lead inductance caused by the installation of the protector is an important factor affecting the protection performance.[Conclusions]The method proposed in this paper can greatly reduce the simulation complexity of the coupling current of an antenna with a complex load, giving it useful reference value for the field of ship electromagnetic pulse protection design. © 2023 Editorial Department of Chinese Journal of Ship Research. All Rights Reserved.