Geometric design safety estimation based on tire–road side friction

A closed-loop drive–vehicle–road–environment system (DVRES) model was established using Adams/Car and Matlab/Simulink. Dynamic responses of lateral tire forces based on tire–road side friction and road geometric characteristics are used to investigate vehicle side slip for geometric design safety estimation. The root mean square, the maximum values of lateral tire forces, comfort limit on curves and vehicle trajectories are used to quantify the safety margin of side friction. The simulation results show that the safety margins of lateral tire forces for radius, operating speed and superelevation rate were 18.2%, 19.3% and 17.6%, respectively, to guarantee good vehicle lateral reliability and ride comfort, while lower speeds are optimal in wet and slippery roads. Finally, a case study was conducted to illustrate the analysis of road design safety, and on-site experiment testing further validated the accuracy and reliability of the closed-loop DVRES model.     

半潜式钻井平台用三滚筒锚机研制

针对目前国内半潜式钻井平台配套用三滚筒式锚机研究文献较少的现状,开展三滚筒锚机的设计研究。该锚机最大额定拉力1 700 kN,容绳量3 500 m,结构采用双滚筒摩擦绞车和储存绞车配合形式,可满足1 200 m水深半潜式钻井平台应用。文中着重介绍了主要设计原理,并进行详细的校核计算及关键部件有限元分析,结论证明该设计合理,使用可靠且安全。     

Safety modeling for two‐way left‐turn lanes and a procedure to identify two‐way left‐turn lane segments with safety concerns

In the past, two‐way left‐turn lane (TWLTL) median treatments have been frequently used in Florida to inexpensively improve traffic and safety performances. In order to identify factors that may have significant impacts on safety operations in TWLTL sections and to identify TWLTL locations that present existing and future safety concerns, a research project was carried out and results are summarized in the paper. In the research, a three‐year crash history database with crashes and section characteristics from a total of 1688 TWLTL sections all over Florida was developed and used. A negative binomial regression model was developed to determine the statistical relationship between the number of crashes per mile per year and several variables such as traffic volume, access density, posted speed, and number of lanes. In regard to the methodology, in order to identify locations with safety concerns, several steps are needed: development of real crash data distribution, determination of statistical distribution models that better represent the actual crash data, determination of percentile values for the average number of crashes, estimation of crash rates for sections with the same characteristics, estimation of critical values for the variables corresponding to the percentile values for average number of crashes, calculation of tables of critical average annual daily traffic values, and generation of a list of TWLTL locations with critical safety concerns. Results presented in the paper have been used in real applications. Copyright © 2012 John Wiley & Sons, Ltd.     

负温混凝土冻害及防冻模型的探讨

通过分析温度对混凝土的损伤机理,尤其是混凝土冻害机理,发展了抗冻临界强度理论和早期结构形成学说,从微观角度定性地描述了负温混凝土防止早期冻害所要形成的结构为抗冻临界界面结构。     

浅谈减缓机车车轮剥离

分析了当前机车车轮剥离的一种原因 ,提出减缓我国机车车轮马氏体剥离和制动剥离的方法。     

高速列车摩擦制动模拟试验研究

根据相似准则在MM 10 0 0型摩擦磨损试验机上进行高速列车摩擦制动模拟试验 ,研究了SiC颗粒增强铝基复合材料和铜基粉末冶金闸片配对时的制动摩擦性能 ,探讨使用铝基复合材料制动盘的可能性。模拟试验结果表明 :铝基复合材料制动盘和铜基粉末冶金闸片配副进行摩擦制动时具有制动温升低 ,摩擦因数稳定和耐磨性好的优点 ,能满足高速列车的制动性能要求     

车轮踏面剥离试验研究

剥离是车轮踏面失效的主要类型。车轮剥离一般分为2种类型,一类是由滚动接触疲劳应力作用引起的剥离;另一类是由热作用和机械作用引起的剥离,主要有制动剥离和擦伤剥离。2种类型的车轮剥离实际上都与轮轨表面摩擦力直接相关。本文主要通过模拟试验研究轮轨摩擦力对车轮剥离的影响。     

侧摩阻力对桩稳定性的影响

以m法为基础,用梁函数逼近桩变形曲线,用文献中方法较为精确地分析了不计和计桩侧摩阻力桩的计算长度。土的抗力增加,桩的刚度减小,桩失稳半波数增加,一般n<10。桩侧摩阻力,特别是负摩阻力对桩的稳定有实质性的影响。     

船用柴油机润滑油配伍试验研究

本文首先介绍了柴油机主要摩擦副——缸套和活塞环的磨损机理,然后提出了对曲柄箱润滑油的要求,其中最主要的是润滑油自始至终必须保持一定的碱性。作者还阐述了合理选择气缸润滑油的依据和方法,最后在我所的试验机上选用3种(A、B、C)不同配伍的润滑油作抗磨性,清净分散性比较试验,得出A优于B,B优于C,及A、B、C3种都可正常使用的结论。     

真空-堆载联合预压下地基抗剪强度计算的研究

在深入分析真空预压加固机理及地基强度增长理论的基础上，对真空-堆载联合预压与堆载预压地基土体的抗剪强度增长差别进行分析，并在堆载预压抗剪强度计算公式的基础上，应用此差值推导出正负压联合作用下的真空-堆载联合预压地基抗剪强度计算公式。