出口澳大利亚30t轴重ZK1—K型转向架的研制

介绍了出口澳大利亚30t轴重ZK1—K型转向架的主要技术特征、技术参数和结构,并对其强度和动力学性能进行了计算与试验。结果表明,该转向架的各项指标均满足相关标准的要求。     

动车铝合金车体焊接接头非线性疲劳累积损伤模型

动车铝合金车体焊接接头疲劳寿命对加载顺序比较敏感,而传统的Miner法无法考虑载荷加载顺序。本文在损伤曲线法的基础上,提出非线性累积损伤模型的数学表达式及参数拟合算法,给出平均应力情况下使用此模型的扩展算式,并对铝合金焊接的对接接头、角接接头进行两级加载实验。实验结果证明:本文模型计算误差小于10%,比传统的Miner模型有更高的精确度,说明这一模型可用于铝合金焊接结构疲劳寿命计算。     

强风区挡风墙高度和位置对接触网区域风速的影响

强风区挡风墙的修建能有效保障列车的正常安全行驶。而挡风墙高度和位置的变化直接影响到接触网区域的风速,因此是修建挡风墙时必须考虑的重要因素。采用高雷诺数κ-ε紊流模型,建立了列车分别位于1线和2线时的计算模型,应用计算流体动力学软件STAR-CD对接触网区域在强风区挡风墙作用下的风速和仰角进行了数值模拟计算,得出不同条件下接触网区域风速的分布数据。研究结果表明,挡风墙高度为3 m以上和距线路中心5 m时,是比较适合列车行走的位置。     

城市轨道交通快线轮轨侧磨成因及防治

对目前轨道交通快线开通运营后轮轨侧磨情况进行深入调研,对轮轨侧磨的特点、成因进行分析,通过动力仿真计算,对比分析100 km/h轨道交通快线车辆与传统80km/h地铁车辆轮轨侧磨程度的差异,最后针对轨道交通快线的轮轨侧磨问题提出防治措施.     

Surf-riding and oscillations of a ship in quartering waves

The behavior of a ship encountering large regular waves from astern at low frequency is the object of investigation, with a parallel study of surf-riding and periodic motion paterns. First, the theoretical analysis of surf-riding is extended from purely following to quartering seas. Steady-state continuation is used to identify all possible surf-riding states for one wavelength. Examination of stability indicates the existence of stable and unstable states and predicts a new type of oscillatory surf-riding. Global analysis is also applied to determine the areas of state space which lead to surf-riding for a given ship and wave conditions. In the case of overtaking waves, the large rudder-yaw-surge oscillations of the vessel are examined, showing the mechanism and conditions responsible for loss of controllability at certain vessel headings.List of symbols c wave celerity (m/s) - C(p) roll damping moment (Ntm) - g acceleration of gravity (m/s²) - GM metacentric height (m) - H wave height (m) - I _x ,I _z roll and yaw ship moments of inertia (kg m²) - k wave number (m^–1) - K _H ,K _W ,K _R hull reaction, wave, rudder, and propeller - K _p forces in the roll direction (Ntm) - m ship mass (kg) - n propeller rate of rotation (rpm) - N _H ,N _W ,N _R hull reaction, wave, rudder, and propeller - N _P moments in the yaw direction (Ntm) - p roll angular velocity (rad/s) - r rate-of-turn (rad/s) - R(,x) restoring moment (Ntm) - Res(u) ship resistance (Nt) - t time (s) - u surge velocity (m/s) - U vessel speed (m/s) - v sway velocity (m/s) - W ship weight (Nt) - x longitudinal position of the ship measured from the wave system (m) - x _G ,z _G longitudinal and vertical center of gravity (m) - x _S longitudinal position of a ship section (S), in the ship-fixed system (m) - X _H ,X _W ,X _R hull reaction, wave, rudder, and propeller - X _P forces in the surge direction (Nt) - y transverse position of the ship, measured from the wave system (m) - Y _H ,Y _W ,Y _R hull reaction, wave, rudder, and propeller - Y _p forces in the sway direction (Nt) - z _Y vertical position of the point of action of the lateral reaction force during turn (m) - z _W vertical position of the point of action of the lateral wave force (m) Greek symbols angle of drift (rad) - rudder angle (rad) - wavelength (m) - position of the ship in the earth-fixed system (m) - water density (kg/m³) - angle of heel (rad) - heading angle (rad) - _e frequency of encounter (rad/s) Hydrodynamic coefficients K roll added mass - N _v ,N _r yaw acceleration coefficients - N _v N _r N _rr N _rrv ,N _vvr yaw velocity coefficients K. Spyrou: Ship behavior in quartering waves - X _u surge acceleration coefficient - X _u X _vr surge velocity coefficients - Y _v ,Y _r sway acceleration coefficients - Y _v ,Y _r ,Y _vv ,Y _rr ,Y _vr sway velocity coefficients European Union-nominated Fellow of the Science and Technology Agency of Japan, Visiting Researcher, National Research Institute of Fisheries Engineering of Japan     

钢管混凝土拱桥在车辆荷载作用下的非线性动力响应分析

根据随动硬化理论和钢管混凝土组合材料恢复力模型 ,提出了复杂应力状态下钢管混凝土组合材料的弹塑性应力应变关系。采用非线性有限元法 ,对一钢管混凝土拱桥进行移动车辆荷载作用下车—桥体系的动力响应分析 ,并进一步研究钢管混凝土组合材料进入塑性后对体系振动的影响 ,取得了较满意的结果 ,为钢管混凝土拱桥动力性能评价提供参考。     

缓和竖曲线的反演设计研究

应用已有的车辆简化模型,借助反演设计理论,研究了缓和竖曲线的反演设计方法;探讨了依据车辆—路面耦合动力学模型的安全性和舒适性动力学评价指标,给出了缓和竖曲线反演设计的一般流程。该方法为开发宜人化路面CAD系统提供了理论依据。     

具有模块化结构的汽车动力学仿真模型的初步研究

初步探讨了面向开发型驾驶模拟器的具有模块化结构的汽车动力学仿真模型建立方法，从而可以在此基础上进一步建立一套通用的面向结构的汽车动力学仿真程序，便捷地在开发型驾驶模拟器上实现对不同类型或同类型不同结构车辆性能的仿真。     

高桥墩之间几何非线性效应的相互干扰分析

提出了高桥墩之间几何非线性效应的相干分析计算模型。它适合于应用平面有限元法的计算程序求解。通过一个实例和应用逐次渐近法验证了该模型的精度，并从中得到一些有用的结论。     

路段动态特征中的交通组成因素研究

基于对交通流建模过程中将车型单一考虑为标准小汽车,忽略了现实交通量中车型的不同构成,本文通过对不同车型的动力特性进行标定,将其特性反映在跟车模型与车道变换模型中,并且利用交通仿真技术,分析了交通量构成对路段行程时间、车速、延误等动态特性指标的影响。