基于Pro/Mechanica的防窜出减速顶的设计

通过应用三维造型软件Pro/Engineer对防窜出减速顶进行建模,以及对防窜出减速顶关键部件的结构分析,介绍了如何在减速顶的设计中应用Pro/Mechanica进行有限元分析和优化设计。该方法可为减速顶产品设计提供指导。     

基于MATLAB／SIMULINK交流电机系统的建模与仿真

在传统电机理论的基础上，使用Matlab/Simulink动态仿真软件建立了交流电机及逆变器系统的仿真模型，给出了系统静态、动态过程的仿真数据及实验波形，结果表明，由此建立的系统运行可靠，响应快，可以在仿真研究中使用。     

CuSn合金接触线的特性研究

从耐摩性、抗拉强度等几个方面阐述了0.3%CuSn合金接触线具有的综合性能,引导新型接触线在我国的推广与应用。     

铝合金舰船结构设计中相关问题探讨

从分析舰船用铝合金的物理化学性能、加工性能及焊接性能入手,阐述铝合金用于船舶建造的诸多优越性.提出在铝合金舰舶的结构设计中应推广应用带筋板结构,当上层建筑采用铝合金结构,主船体为钢质时,应采用结构过渡接头直接焊接的方法.     

基于ARM的能量管理系统显示终端研究

研究了基于先进的精简指令集处理器（Advanced RISC Machines，缩写ARM）的嵌入式显示终端的应用开发，运用先进的ARM微处理器核心技术、嵌入式软件技术、嵌入式图形用户界面技术、串行通信技术、信息的存储和管理技术等，完成了以S3C44BOX处理器为核心的硬件平台的设计，并在此基础上完成了μC／OS-II嵌入式操作系统的移植，以及系统软件主要功能模块的实现。研制出能够满足船舶能量管理系统（Power Manage System，缩写PMS）中实际需要的嵌入式显示终端。     

某客车底架结构局部优化设计研究

以底架局部为研究对象,抽取有代表性的局部结构建立有限元模型,提出多个改进方案;通过对比各改进方案,得到综合效果较好的优化结构。该方法在结构优化设计中简单、高效。     

Automatic guidance control of an articulated all-wheel-steered vehicle

This paper presents automatic guidance control of a single-articulated all-wheel-steered vehicle being developed by the Korea Railroad Research Institute. The vehicle has an independent drive motor on each wheel except for the front axle. The guidance controller is designed so that the vehicle follows the given reference path within permissible lateral deviations. We use a three-input/three-output linearised model derived from the nonlinear dynamic model of the vehicle. For the purpose of simplifying the controller and making it tunable, we consider a decentralised control configuration. We first design a second-order decoupling compensator for the two-input/two-output system that is strongly coupled and then design a first-order controller for each decoupled feedback loop by using the characteristic ratio assignment method. The simulation results for the nonlinear dynamic model indicate that the proposed control configuration successfully achieves the design objectives.     

世界超龄VLCC(超级油船)市场分析

目前油船市场有很多70年代造U/VLCC船龄要超过25年，根据U/VLCC市场的情况，分析了决定超龄U/VLCC数量的因素，以及船东可能采取的对策。     

新型Zn—Al合金着色工艺的研究

对新型Ｚｎ－Ａｌ合金（铝含量３３％，锌含量６７％）着色工艺进行了研究，结果表明：由５－碘基水杨酸（浓度１５％）和少量硫酸（浓度为０．２％）组成的电解液能形成稳定、均匀的灰褐角镀层，解决了合金表观色泽问题。     

Inverse identification of wheel–rail contact forces based on observation of wheel disc strains: an evaluation of three numerical algorithms

In this paper, three numerical algorithms for the identification of wheel–rail contact forces based on measured wheel disc strains on an instrumented railway wheelset are discussed and compared. The three algorithms include one approach resting on static calibration, one that is applying a Kalman filter and the third is exploiting an inverse identification scheme. To demonstrate and evaluate the alternative methods, two load cases including periodic excitation by sinusoidal wheel–rail irregularities and transient excitation by an insulated rail joint are considered. Based on a previously presented vehicle–track interaction model in the time domain, load scenarios are defined by taking the calculated vertical wheel–rail contact forces as the reference force to be re-identified by the proposed algorithms. The reference contact forces are applied on a finite element model of the wheel to generate synthetic observation data, that is, radial strains at the positions of the strain gauges, serving as input to the identification procedures. It is concluded that the inverse identification scheme leads to superior accuracy at higher computational cost. If on-line implementation and evaluation is required, the Kalman filter generates better accuracy than the static calibration approach.