一种改进的IGBT稳态解析模型

根据IGBT物理结构与基区过剩载流子的分布特点进行半导体物理公式推导,参考现有模型并对其不足之处进行改进,把整个基区分为多个区域并采用不同的边界条件分别求解连续性方程,提出了一种考虑了载流子二维分布的改进的稳态解析模型,较准确地反映了IGBT基区过剩载流子分布,得到了更为准确的V-I特性仿真结果,通过实验验证了该模型的准确性.     

公路工程试验检测数据处理问题探析

在公路工程的施工技术管理中,工程试验检测是一个重要环节,同时也是公路施工质量控制和工程竣工验收工作中不可或缺的一个关键步骤。针对这样一个关键环节,从数据表达和误差表示两个方面分析公路工程试验检测数据处理问题,可供参考借鉴。     

二次蒸发制备的CuxS薄膜特性研究

在玻璃基底上通过两次蒸发的新技术制备SuxS薄膜，硫在衬底温度为160℃-200℃时与淀积在衬底上的铜直接发生反应，生成CuxS薄膜，实验发现，生成的CuxS薄与衬底温度有很大关系。160℃时生成的CuxS呈黄绿色，而在190℃左右生成的多晶状的CuxS薄膜，颜色为深绿色，通过XRD、SEM、TS等方法样品的组织结构进行了研究和讨论。     

提高标准件模具寿命的有效途径

在汽车标准件的生产过程中,模具起着主导作用,只有提高模具寿命,才能起到事半功倍的效果。有效提高标准件模具的寿命,除了需要合理选用模具的材料,合理设计模具的结构,做好模具的热处理以及加工与抛光外,还要选用恰当的润滑剂和精度高的设备,同时要加强管理,提高操作者的素质。     

隧道数字化火灾预警系统的在线量化评估

为检查和评价隧道及地下空间火灾预警系统的实际功能,需要一套可行的在线评估手段。根据近年来国内外全尺寸隧道火灾发展曲线的试验结果,提出隧道火情的定义依据;引用运营隧道内准分布式光纤光栅感温火灾探测器的实测数据,证明运营中隧道报警系统的个性化现象;提出合格的数字化报警系统应存在一个在统计学意义上使漏报率和误报率同时达到期望值的合理阈值取值区间;建议以该区间的尺度作为该系统功能完好性的评估指标;对日常隧道运行温度数据的统计分析可估计合理阈值取值区间的下限,对规定条件下的现场点火试验温度数据分析可估计合理阈值取值区间的上限。在隧道运营期该区间尺度可实时在线自动更新。     

考虑沥青路面材料参数空间差异性的解析计算及影响分析

复杂服役环境下沥青路面的材料参数存在明显的空间差异性，具体表现为沿深度的模量梯度分布与非连续层间接触以及横观各向同性，实现其解析计算对现有的沥青路面力学响应分析及结构设计方法具有重要的参考价值。为此，从弹性力学基本方程出发，基于状态空间法，推导了具有指数模量梯度的横观各向同性弹性层状体系通解；在此基础上，基于波传递方法，将状态向量转换为波向量，并结合边界条件和层间条件，建立了考虑沥青路面材料参数差异性的多层路面结构解析解；然后借助MATLAB平台编制了数值计算程序，采用文献对比、BISAR程序以及有限元软件ABAQUS验证了该解析解的精度与效率；最后结合典型数值算例，阐述了该解析解在沥青Top-Down开裂和传统路面疲劳损伤分析中的应用。理论推导和数值计算结果表明：该解析解摆脱了弹性力学问题求解对应力函数的依赖性，并且借助波传播方法，避免了求解中正指数过大对求解精度的影响，并使得边界条件和不同层间接触关系的描述更加便捷；沥青路面材料参数的空间差异性不可忽视，沥青面层连续模量梯度会造成更大的路表拉应力和最大剪应力，进而加剧沥青路面的Top-Down开裂；而横观各向同性和层间接触状态间存在耦合效应，从而会加剧沥青路面的疲劳损伤。     

From Twitter to detector: Real-time traffic incident detection using social media data

The effectiveness of traditional incident detection is often limited by sparse sensor coverage, and reporting incidents to emergency response systems is labor-intensive. We propose to mine tweet texts to extract incident information on both highways and arterials as an efficient and cost-effective alternative to existing data sources. This paper presents a methodology to crawl, process and filter tweets that are accessible by the public for free. Tweets are acquired from Twitter using the REST API in real time. The process of adaptive data acquisition establishes a dictionary of important keywords and their combinations that can imply traffic incidents (TI). A tweet is then mapped into a high dimensional binary vector in a feature space formed by the dictionary, and classified into either TI related or not. All the TI tweets are then geocoded to determine their locations, and further classified into one of the five incident categories.We apply the methodology in two regions, the Pittsburgh and Philadelphia Metropolitan Areas. Overall, mining tweets holds great potentials to complement existing traffic incident data in a very cheap way. A small sample of tweets acquired from the Twitter API cover most of the incidents reported in the existing data set, and additional incidents can be identified through analyzing tweets text. Twitter also provides ample additional information with a reasonable coverage on arterials. A tweet that is related to TI and geocodable accounts for approximately 5% of all the acquired tweets. Of those geocodable TI tweets, 60–70% are posted by influential users (IU), namely public Twitter accounts mostly owned by public agencies and media, while the rest is contributed by individual users. There is more incident information provided by Twitter on weekends than on weekdays. Within the same day, both individuals and IUs tend to report incidents more frequently during the day time than at night, especially during traffic peak hours. Individual tweets are more likely to report incidents near the center of a city, and the volume of information significantly decays outwards from the center.     

Virtual 3D city model as a priori information source for vehicle localization system

This paper aims at demonstrating the usefulness of integrating virtual 3D models in vehicle localization systems. Usually, vehicle localization algorithms are based on multi-sensor data fusion. Global Navigation Satellite Systems GNSS, as Global Positioning System GPS, are used to provide measurements of the geographic location. Nevertheless, GNSS solutions suffer from signal attenuation and masking, multipath phenomena and lack of visibility, especially in urban areas. That leads to degradation or even a total loss of the positioning information and then unsatisfactory performances. Dead-reckoning and inertial sensors are then often added to back up GPS in case of inaccurate or unavailable measurements or if high frequency location estimation is required. However, the dead-reckoning localization may drift in the long term due to error accumulation. To back up GPS and compensate the drift of the dead reckoning sensors based localization, two approaches integrating a virtual 3D model are proposed in registered with respect to the scene perceived by an on-board sensor. From the real/virtual scenes matching, the transformation (rotation and translation) between the real sensor and the virtual sensor (whose position and orientation are known) can be computed. These two approaches lead to determine the pose of the real sensor embedded on the vehicle. In the first approach, the considered perception sensor is a camera and in the second approach, it is a laser scanner. The first approach is based on image matching between the virtual image extracted from the 3D city model and the real image acquired by the camera. The two major parts are: 1. Detection and matching of feature points in real and virtual images (three features points are compared: Harris corner detector, SIFT and SURF). 2. Pose computation using POSIT algorithm. The second approach is based on the on–board horizontal laser scanner that provides a set of distances between it and the environment. This set of distances is matched with depth information (virtual laser scan data), provided by the virtual 3D city model. The pose estimation provided by these two approaches can be integrated in data fusion formalism. In this paper the result of the first approach is integrated in IMM UKF data fusion formalism. Experimental results obtained using real data illustrate the feasibility and the performances of the proposed approaches.     

混合下单模式下在线餐饮订单配送优化模型

针对在线餐饮订单量激增及订单到达非均匀分布导致的调度不合理与资源浪费等问题，提出顾客提前下单与动态实时下单相结合的下单模式，研究此模式下订单配送优化. 考虑在线餐饮订单配送优化具有的动态VRP和多回程VRP属性，以最小化配送成本为目标，建立带有软时间窗的整数规划模型. 设计基于插入算法和2-opt 邻域搜索的混合启发式算法求解模型. 通过算例，分析提前下单顾客比例、提前下单时长等因素的影响. 结果表明，单个因素的增加会降低配送成本，当两者同时增加，因系统达到饱和使配送成本不升反降，因此要调整措施使顾客下单情况与系统配送能力相适应.     

新型舰载ESM信号处理系统

随着雷达技术的发展，电磁环境越来越密集，雷达信号的类型超来超复杂，这就对ＥＳＭ信号处理提出了更高的要求。基于目前ＥＳＭ信号的处理方法，本文提出了一种先进的工程上可实现的新一代舰载ＥＳＭ信号处理系统。