放宽条件定点集结模式下编组站车辆 集结排队系统分析

集结模式决定了货车集结过程的结束条件，定点集结是一种高效率的集结方式，有利于提高运输质量.针对放宽条件定点集结模式下编组站车辆集结过程，建立离散时间批到达批服务排队模型，利用嵌入式马尔可夫链方法求得离去时刻瞬时系统集结车辆队长分布，并求得任意时刻车辆集结队长分布，在此基础上分别分析了最小编成辆数，车组大小分布，车流到达强度，服务时间间隔分布对车辆平均集结队长，集结延误时间，效率，一昼夜发送车流量等系统指标的影响.分析结果表明，各因素对车辆集结排队系统影响明显.因此，利用本文提出的模型能为编组站的精细化管理和车流组织优化提供决策参考.     

Methods to reduce dimensionality and identify candidate solutions in multi-objective signal timing problems

Adjusting traffic signal timings is a practical way for agencies to manage urban traffic without the need for significant infrastructure investments. Signal timings are generally selected to minimize the total control delay vehicles experience at an intersection, particularly when the intersection is isolated or undersaturated. However, in practice, there are many other potential objectives that might be considered in signal timing design, including: total passenger delay, pedestrian delays, delay inequity among competing movements, total number of stopping maneuvers, among others. These objectives do not tend to share the same relationships with signal timing plans and some of these objectives may be in direct conflict. The research proposes the use of a new multi-objective optimization (MOO) visualization technique—the mosaic plot—to easily quantify and identify significant tradeoffs between competing objectives using the set of Pareto optimal solutions that are normally provided by MOO algorithms. Using this tool, methods are also proposed to identify and remove potentially redundant or unnecessary objectives that do not have any significant tradeoffs with others in an effort to reduce problem dimensionality. Since MOO procedures will still be needed if more than one objective remains and MOO algorithms generally provide a set of candidate solutions instead of a single final solution, two methods are proposed to rank the set of Pareto optimal solutions based on how well they balance between the competing objectives to provide a final recommendation. These methods rely on converting the objectives to dimensionless values based on the optimal value for each specific objectives, which allows for direct comparison between and weighting of each. The proposed methods are demonstrated using a simple numerical example of an undersaturated intersection where all objectives can be analytically obtained. However, they can be readily applied to other signal timing problems where objectives can be obtained using simulation outputs to help identify the signal timing plan that provides the most reasonable tradeoff between competing objectives.     

论孔子人才观的历史定位与普适价值

孔子的人才观虽然产生于春秋时期动荡的社会背景下,却揭示了人才的最本质内涵———＂仁、智、勇＂。三者作为人才内涵的核心三要素,形成一个内在的三角稳定结构,它能够持久地推动包括成才在内的人的生命境界的发展,因而具有超越时代和社会阶层的普适价值。     

Compliance with MARPOL Annex VI regulation 14 by ships in the Gulf of Guinea sub-region: Issues,challenges and opportunities

The negative environmental and health impacts association with high sulphur dioxide emissions from shipboard machineries have been raised by various stakeholders within the marine transportation sector. It is against this backdrop that the International Maritime Organisation under the MARPOL Annex VI regulation 14 has capped sulphur emission to 0.1% for Sulphur Emission Control Areas and 0.5% for the other shipping nations. However, ship owners in the Gulf of Guinea (GoG) sub-region are facing multitudes of challenges in meeting up with this new IMO regulation. This paper aims to identify the main barriers hampering effective compliance to this new regulation by ships operating in the GoG, rank the barriers, and then discuss the possible opportunities that may arise as a result of addressing the challenges. To identify the main barriers, experts with several years of experience in the maritime industry from Ghana and Cameroun were used while multi-criteria decision-making (MCDM) method combining analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS) was employed to rank the barriers. Other methods such as fuzzy AHP (FAHP), rank-order centroid (ROC) and TOPSIS were combined to validate the result of the study. The findings indicate that lack of infrastructure, lack of comprehensive marine air pollution laws and high capital and operational costs of sulphur reduction solutions emerged as the top three ranked barriers. The findings of this study can be useful to ship owners and policy makers in dealing with the issues of marine air pollution.     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

Adoption of alternative fuel vehicles: Influence from neighbors,family and coworkers

During the last years, many governments have set targets for increasing the share of biofuels in the transportation sector. Understanding consumer behavior is essential in designing policies that efficiently increase the uptake of cleaner technologies. In this paper we analyze adopters and non-adopters of alternative fuel vehicles (AFVs). We use diffusion of innovation theory and the established notion that the social system and interpersonal influence play important roles in adoption. Based on a nationwide database of car owners we analyze interpersonal influence on adoption from three social domains: neighbors, family and coworkers. The results point primarily at a neighbor effect in that AFV adoption is more likely if neighbors also have adopted. The results also point at significant effects of interpersonal influence from coworkers and family members but these effects weaken or disappear when income, education level, marriage, age, gender and green party votes are controlled for. The results extend the diffusion of innovation and AFV literature with empirical support for interpersonal influence based on objective data where response bias is not a factor. Implications for further research, environmental and transport policy, and practitioners are discussed.     

公路工程施工管理质量研究

公路工程施工管理直接关系到工程项目的质量,在施工中加强管理控制是十分必要的,结合公路工程施工管理的特点,对影响公路工程管理质量的因素进行分析,并提出具体解决对策,对类似工程施工有一定的指导意义.     

An optimal data-splitting algorithm for aircraft scheduling on a single runway to maximize throughput

In this research, we present a data-splitting algorithm to optimally solve the aircraft sequencing problem (ASP) on a single runway under both segregated and mixed-mode of operation. This problem is formulated as a 0–1 mixed-integer program (MIP), taking into account several realistic constraints, including safety separation standards, wide time-windows, and constrained position shifting, with the objective of maximizing the total throughput. Varied scenarios of large scale realistic instances of this problem, which is NP-hard in general, are computationally difficult to solve with the direct use of commercial solver as well as existing state-of-the-art dynamic programming method. The design of the algorithm is based on a recently introduced data-splitting algorithm which uses the divide-and-conquer paradigm, wherein the given set of flights is divided into several disjoint subsets, each of which is optimized using 0–1 MIP while ensuring the optimality of the entire set. Computational results show that the difficult instances can be solved in real-time and the solution is efficient in comparison to the commercial solver and dynamic programming, using both sequential, as well as parallel, implementation of this pleasingly parallel algorithm.     

基于NFFD 算法的船体几何变形技术

本文以非均匀有理B样条基函数作为参数体属性,并结合非均匀控制点网格,建立了适用于船体几何的NFFD变形技术。重点阐述了NFFD方法的基本原理和变形规则,并以矩阵表示方法为基础构建了数学模型。研究了控制点数量和分布对变形结果的影响,增加了控制点变形几何的能力并获得了更大的设计空间。最后,以某CNG运输船为例完成了球鼻艏、船艏和船艉部分几何的自动变形。本文的工作为船型优化提供了良好的变形工具。